Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Delray Beach
Gate motor and opener work in Delray Beach runs $250-$750 for most repairs, with full operator replacements typically landing between $1,200 and $2,800 depending on brand and gate size. We cover Delray Beach from the Kings Point gatehouses in 33446 to the beachside driveways in 33483. Hal Gatewood has been fixing gates since 2001 and our crew knows the difference between a Viking slide operator on a multi-lane guard booth and a Ghost Controls swing arm on a private driveway off Linton Boulevard. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Delray Beach’s Preferred Gate Motor & Opener Company
We’re not a call center. Hal Gatewood’s name is on the shop and on every invoice, and our published address means you can drive over and look us in the eye if you ever want to. That’s the kind of accountability people in Delray Beach tell us they can’t find with the big national outfits.
Our crews work in Delray Beach’s gated communities every week. We know the HOA managers at Kings Point, the security staff at Huntington Lakes, and the property managers who handle High Point. That matters because gate work in these communities isn’t something you can just show up and do. It requires coordination, scheduling around shift changes, and sometimes a temporary traffic plan. We do that work without making it your problem.
Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no fine print. We also answer our phones 24/7 with a live person, not a voicemail queue, because a gate stuck open at 11 p.m. is a security problem, not a scheduling problem.
Our Gate Motor & Opener Services in Delray Beach
Motor Installation
New gate motor installation in Delray Beach starts with measuring the gate’s actual weight, travel, and cycle count, not just grabbing a box off the truck. Many of the community gates in western Delray Beach weigh far more than their original operators were rated for, because panels get reinforced and retrofitted over the decades. We install operators sized for the real load, not the paperwork. For residential driveways east of Federal Highway, we commonly install quieter belt-driven swing operators that don’t wake the neighbors every time a car pulls in.
Motor Repair
Most gate motor failures in Delray Beach are repairable on the spot, and Hal’s philosophy is fix it before swapping it. A burned capacitor, a fried relay, a stripped gear from a corroded track putting strain on the drive: these are $180-$420 repairs, not $2,000 replacements. We weld on site, replace only what’s actually failed, and tell you straight if a repair no longer makes sense. The 90-Day Done Right Promise covers every repair we make.
Linear Motor
Linear gate motors are the most common actors in Delray Beach’s western planned communities. These are the workhorses that push sliding gates back and forth hundreds of times a day in neighborhoods built in the 1980s and 1990s. We service and replace Linear operators across Kings Point, Huntington Lakes, and the surrounding communities, and we stock common Linear parts locally so a burned control board doesn’t mean waiting a week for a truck from Orlando.
Slide Motor
Sliding gates dominate Delray Beach’s HOA entries and commercial lots, and slide motors take a beating from our salt air and daily afternoon storms. Salt-laden air off the Atlantic accelerates corrosion of steel tracks and rollers, especially in the 33483 corridor. When a track corrodes out of alignment, the motor strains against friction and burns out prematurely. We don’t just swap the motor: we check the track, the rollers, and the rack before we put a new operator in. Fix the track without the motor and you’ll be back in six months. Fix the motor without the track and you’ll be back in six months too. We fix both at once.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Delray Beach
Gatewood Fence & Gate is certified to service nine major gate brands, including Viking, Ghost Controls, Linear, DoorKing, LiftMaster, and FAAC. In Delray Beach’s 55+ communities, Viking and Linear slide operators are everywhere, and we keep common replacement parts for them on the truck. For residential swing gates, we work on Ghost Controls and DoorKing systems regularly. If your gate operator is a brand we don’t carry parts for, we’ll tell you up front and order what’s needed. No surprises. Our Gate Motor & Opener team knows these brands inside and out because we see them every day, not twice a year.
Common Gate Motor & Opener Problems We See in Delray Beach Homes
- Corroded tracks and rollers on beachside properties. The salt-laden air in the 33483 corridor east of Federal Highway eats through galvanized steel faster than anywhere else in Palm Beach County. We see slide gates where the rollers are rusted solid and the motor is burning itself out trying to move the gate. We replace the roller set and the motor together, not one then the other.
- Fried control boards from lightning and humidity. Delray Beach’s summer thunderstorms are nearly daily, and lightning strikes within a mile of a gate operator can take out the control card even if it doesn’t hit the gate directly. Add near-constant humidity and you get corrosion on board contacts. We keep common LiftMaster and FAAC control boards in stock for same-week repair.
- Loop detector failures at season opening. The snowbird cycle means many gates sit nearly idle from May through October, then get hammered starting in November. Loop detectors that worked fine in April suddenly fail when hundreds of cars a day hit them. We test loop detector systems as part of every HOA gate inspection, not just when the gate stops working.
- Rack-and-pinion wear on high-traffic community gates. Gates at Kings Point and Huntington Lakes cycle hundreds of times daily. That’s the equivalent of years of residential use compressed into one season. Rack teeth wear down, motors skip, and eventually the gate binds. We inspect the rack every time we touch a slide motor in these communities.
Pricing for Gate Motor & Opener in Delray Beach, FL
Gate motor repair in Delray Beach typically runs $250-$750, depending on what actually failed. A new control board for a Viking or Linear slide operator usually lands between $350 and $650 installed. Full operator replacement runs $1,200-$2,800 for most sliding and swing gates in the city, with the higher end covering heavy community gates with multiple safety devices and intercom integration. Battery backup systems add roughly $400-$900 depending on the operator’s power draw and mounting setup. We quote the price and get your agreement before any work starts, and estimates are free. You’ll never get a bigger number at the door than the one we gave you on the phone.
Standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Delray Beach
Beyond Delray Beach, our crew works regularly in Kings Point, Boynton Beach, Boca Raton, and Lantana. If your community sits on the edge of city lines or spans multiple ZIP codes, we’ll still get there. Our Delray Beach crews cover the whole corridor, and we treat HOA work across city boundaries as one service area, not a reason to charge more.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Delray Beach
Viking and Linear slide gate operators dominate Kings Point and Huntington Lakes. These communities were built in the 1980s and 1990s when both brands were the standard for high-cycle sliding gates, and many original operators are still running, or trying to run. We stock common Viking and Linear parts locally so repairs in these communities don’t wait on out-of-state shipping. Call (877) 610-2993 and tell us which community you’re in, and we’ll tell you what we’re likely dealing with before we even arrive.
We schedule the work around shift changes and coordinate with HOA management and on-site security, sometimes routing traffic through a single lane while the other is down. We did exactly this at Kings Point in 33446 when a failed Viking slide gate operator on a multi-lane guard-booth entry needed replacing after a lightning storm shorted the loop detector. We worked with security to temporarily reroute traffic, installed the new operator, and verified the safety photocells before evening rush. The gate was back online the same day.
Yes. Battery backup for gate operators runs roughly $400-$900 installed, and it’s one of the best investments a Delray Beach HOA can make. Our summer storms knock out power regularly, and a gate that won’t open during an outage traps residents or forces security to manually swing a heavy gate. We size the battery to the operator’s draw and test the system under load before we leave. Ask us about it when you call for your free estimate.
Yes, we do intercom and keypad integration on nearly every HOA gate we replace. We match the new operator’s control board to your existing access system, whether it’s a simple telephone-entry call box or a multi-tenant directory. We don’t rip out working keypads and call boxes just to sell you new ones. The goal is a new motor that talks to the old system without a resident ever noticing anything changed except the gate actually works.
Months of disuse followed by sudden heavy traffic in November exposes everything that was quietly failing. Loop detectors that sat idle lose their tuning, rack-and-pinion wear that was tolerable in May becomes a bind in December, and control boards that sat in humid summer air corrode just enough to fail when the cycle count spikes. We schedule pre-season inspections in October for exactly this reason. Call us before your gate gets hammered by the seasonal rush, not after it stops working.
Contact Gatewood Fence & Gate for Gate Motor & Opener Work in Delray Beach
If your gate motor is screaming, stuck, or just dead, call (877) 610-2993. We answer live, 24/7. You’ll get a straight answer, a real price before any work starts, and a crew that knows Delray Beach’s communities because we’re in them every week. Free estimates, no trip charge inside the county, and the 90-Day Done Right Promise in writing on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Delray Beach and surrounding communities with gate motor and opener expertise since 2001.