Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Delray Beach
Gate installation in Delray Beach runs between $1,800 and $6,500 for most residential driveway gates, and $6,000 to $18,000 for community and HOA gate systems in the city’s large 55+ communities. We quote every job upfront, in writing, before any work starts. Hal Gatewood has been doing this since 2001, and the person who answers your call at (877) 610-2993 is somebody who knows exactly what a Kings Point gate operator goes through during snowbird season.
Delray Beach is not one market. It’s two. East of I-95 you have beachside homes along the 33483 corridor with ornamental iron gates eating salt air every single day. West of the Turnpike you have Kings Point, Huntington Lakes, and High Point, where 1980s-era sliding gate operators cycle hundreds of times daily and HOAs run the show. We work both sides, and we schedule around each one’s reality.
Why Gatewood Fence & Gate Is Delray Beach’s Preferred Gate Installation Company
We show up when we say we will. That sounds small until you’ve waited through a three-hour window from a company that then sends a text saying the tech is running late. Hal publishes his address. His name goes on every invoice. The 90-Day Done Right Promise is stamped in writing on every job, Delray Beach included.
Most of our Delray Beach work comes from HOAs and homeowners who have already tried the national route once. They got quoted one number on the phone and a different one at the driveway. We don’t work that way. The price Hal quotes is the price on the invoice. Every install gets a written quote beforehand, and there is no trip charge inside Palm Beach County.
We also understand the logistical layer that comes with Gate Installation in Delray Beach work inside guard-gated communities. Multi-lane entry systems cannot just be taken offline during morning shift change. We coordinate with HOA management offices and on-site security to schedule installs during maintenance windows, and we bring our own temporary traffic plan when the job calls for it. That’s not something a generic installer thinks about.
Our Gate Installation Services in Delray Beach
Sliding Gate Installation
Sliding gates are the workhorse of Delray Beach’s western communities. The 1970s- and 1980s-era tracks in Kings Point and Huntington Lakes have decades of corrosion baked in, which means a new gate often needs a new track, not just a new panel. We weld and fabricate on site, so the gate stays in your driveway the whole time. A typical sliding gate install in Delray Beach runs $2,500 to $7,000 depending on track length, panel material, and operator integration.
Swing Gate Installation
Swing gates dominate east Delray Beach, especially in the 33483 zip and along the Intracoastal. Decorative wrought-iron driveway gates look beautiful, but salt air eats hinges and operator arms faster than homeowners expect. We install swing gates with marine-grade hinges and sealed operator housings when we’re working beachside. Swing gate installation in Delray Beach typically falls between $2,200 and $6,500, with double gates running higher.
Security Gate Installation
For Delray Beach homeowners who want more than a pretty gate, we build security gate systems with keypad entry, intercom wiring, and operators designed for daily abuse. In 55+ communities, that means battery backup so a power cut doesn’t leave residents locked out at 7 a.m. Security gate packages in Delray Beach, including access control, start around $4,500 and go up based on traffic volume and lane configuration.
Pedestrian Gate Installation
Every large community has them: the walk-through gates at pools, tennis courts, and clubhouse entrances. These get ignored until they sag, then someone props them open with a chair and the whole security setup falls apart. We install and hang pedestrian gates in Delray Beach starting around $900 for a basic steel gate, with keypad or fob access adding $400 to $1,200.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Delray Beach
We’re certified to work on LiftMaster, FAAC, BFT, Linear, and Viking operators, which covers most of what’s running in Delray Beach today. If you’ve got an original FAAC slide operator at a community pool gate from the 1990s, we can source parts or recommend a same-footprint replacement without re-engineering the whole lane. We keep common control boards and loop detector parts stocked locally so we’re not waiting on a warehouse in another state while your gate sits open. For new installs, we lean toward LiftMaster and BFT on the community side because parts availability and local service support are better in South Florida than most brands.
Common Gate Installation Problems We See in Delray Beach Homes
- Corroded slide tracks on beachside properties. The 33483 corridor gets Atlantic salt spray year-round. A steel track that would last 20 years inland can seize up in 8 years within a mile of the ocean. We install aluminum or powder-coated track on beachside jobs.
- Outdated loop detectors in 1980s communities like High Point. The original sensing loops often fail to detect modern cars and trucks, so gates close late, close early, or stay open for no reason. We replace them with dual-channel detectors that read newer vehicles properly.
- Lightning-fried control boards. Delray Beach gets near-daily afternoon storms in summer. When a surge hits an unprotected operator, the board goes dead and an entire community lane shuts down. We install surge suppressors on every operator we touch, new install or not.
- Snowbird season failures. A gate that sat idle from May to October doesn’t fail in October. It fails the first week of November, when several thousand residents all return and the operator starts cycling 300 times a day. We schedule pre-season inspections in October for Delray Beach communities that don’t want a November surprise.
Pricing for Gate Installation in Delray Beach, FL
| Gate Type | Typical Installed Cost in Delray Beach |
|---|---|
| Steel pedestrian gate | $900 - $1,800 |
| Residential sliding gate | $2,500 - $7,000 |
| Residential swing gate (single) | $2,200 - $4,800 |
| Residential swing gate (double) | $4,000 - $6,500 |
| Security gate with access control | $4,500 - $9,000 |
| Community / HOA gate system | $6,000 - $18,000 |
Your actual number comes down to track length, panel material, operator brand, whether we’re running new power, and whether the job is east-side residential or west-side HOA. The quote Hal gives you is the price you pay. Nothing changes at the door. Call (877) 610-2993 and we’ll send someone to measure, walk the site, and put a written figure in your hand. Free estimates, no trip charge inside the county, no games.
We Also Serve Cities Near Delray Beach
Our Gate Installation team covers Delray Beach plus the surrounding corridor: Kings Point, Boynton Beach, Boca Raton, and Lantana. If you’re in a community that borders Delray Beach but isn’t in the city proper, same crew, same 90-Day Done Right Promise, same live person on the phone. We schedule installs around the HOA’s calendar, not ours.
How Delray Beach’s 55+ Communities Shape the Way We Work
Delray Beach’s western ZIP codes hold one of the densest concentrations of large age-restricted gated communities in Palm Beach County. Kings Point, Huntington Lakes, and High Point alone account for thousands of residents cycling through community gates every day. Those gates are not a homeowner’s weekend project. They’re 1980s- and 1990s-era operators running design lifespan plus ten years, controlled by HOAs, watched by security staff, and expected to work every single time a car rolls up.
What that means practically: gate installation here is an HOA-contract business first. A new operator at a Kings Point lane is not a call-and-replace job. It involves the management office, the security desk, shift schedules, and often a temporary lane re-route. We have been through that dance enough times to know the people at the desk by name. That level of coordination is the difference between a smooth install and a week of backed-up traffic at the guard booth.
We recently replaced a failed swing gate operator at Kings Point. The original 1990s FAAC unit had burned out its control board after years of salt-air corrosion. Our crew coordinated with the HOA office and on-site security to install a new LiftMaster operator with battery backup and a modern loop detector during a scheduled maintenance window, keeping the guard-booth entry lane flowing without disruption. The residents never noticed. That’s the goal.
Salt Air, Lightning, and Snowbirds: What Delray Beach Does to Gate Hardware
Delray Beach’s location between the Atlantic and the Everglades creates conditions that shorten the life of gate hardware dramatically. The 33483 corridor gets salt-laden air off the ocean that attacks steel tracks, hinge pins, and operator housings all year. We see slide gates within a half-mile of the beach with rollers seized solid inside two or three seasons.
The lightning is just as rough on the west side. Afternoon storms roll through Palm Beach County almost every summer day, and a strike anywhere near a community’s electrical grid can send voltage through an operator that has no surge protection. A fried control board on a community gate is a security problem, not just an inconvenience. Residents get locked in or out until someone replaces it. We put surge suppression on every new install and recommend it on every service call.
Then there is the snowbird cycle. Gates in Delray Beach take a beating from November through April, when peak traffic hits thousands of cycles a day. From May to October they sit. Failures concentrate right at season opening. That’s why we offer October pre-season inspections for community gates. Catch the corroded roller and the weak loop detector in October and you don’t have a failure on the busiest move-in weekend of the year.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Delray Beach
We schedule every HOA install in coordination with the community’s management office and security staff, typically during a maintenance window or off-peak hours, and we set up a temporary traffic plan when a lane has to come offline for more than a few minutes. In most cases we can keep at least one lane open the entire time. Call (877) 610-2993 and we’ll coordinate directly with your HOA.
Yes. We install battery backup modules on most LiftMaster, BFT, and Linear sliding gate operators, including older Kings Point units. Battery backup keeps the gate operational in a power outage so residents are never trapped in or out. Expect the add-on to run $400 to $900 depending on the operator model.
For most east Delray Beach homes in the 33483 area we recommend both: remotes for daily use and a keypad for delivery drivers, house guests, and walk-in access. Keypads hold up better than remotes in the humidity, and they can’t get lost in a drawer. A good keypad adds $300 to $600 to the installed cost.
A sliding gate with a battery-backup operator and a manual release is the most reliable choice for a Delray Beach snowbird. Sliding gates have fewer moving hinge points than swing gates, so months of inactivity is less likely to leave you with a seized hinge. Add a surge suppressor and you’re protected while away. Typical installed cost in Delray Beach starts around $2,800.
Salt air corrodes steel tracks, hinge pins, and operator housings at roughly double the inland rate in the 33483 corridor. We use aluminum or powder-coated track, stainless or marine-grade hardware, and sealed operator enclosures on beachside installs, which typically adds 10 to 20 percent to the material cost but buys years of extra life.
Call Gatewood Fence & Gate for Gate Installation in Delray Beach
If you’re in Delray Beach and you need a gate installed, call (877) 610-2993. Hal or someone on his crew will answer, ask about your gate and your community, and schedule a free measure and written quote. The name is on the shop, the shop is down the road, and the price you’re quoted is the price you’ll pay. That’s how we’ve done it since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Delray Beach since 2001.