Gate Motor & Opener in Burleson - Written Price, Install Date Set

Fast, Reliable Gate Motor & Opener Across Burleson

Gate motor and opener work in Burleson usually runs $450-$1,400 for a full install or major repair, and the job often starts with fixing the gate itself before any operator gets mounted. That’s the Burleson reality: a lot of the automatic driveway gates across 76028 and 76097 were built during the 2005-2015 subdivision boom, and that hardware is now failing right on schedule. If your gate motor is dead, straining, or beeping an obstruction code, call us at (877) 610-2993 and we’ll get someone to your side of Johnson County fast. Hal Gatewood doesn’t hand your call to a queue; a live person picks up.

Call (877) 610-2993

We’re Gate Motor & Opener in Burleson specialists, and we’ve spent years learning what this city’s gates do. The truth is straightforward: a gate operator mounted on a warped, sagging, or heaving gate will burn itself out. So we fix the gate first, then the motor. That sequence saves you a second service call and a second bill.

Why Gatewood Fence & Gate Is Burleson’s Preferred Gate Motor & Opener Company

Hal’s name is on the shop, and his phone number is not a secret. That matters in Burleson, where folks still look you up before they let you in the driveway. We’ve been owner-operated since 2001, not a rotating crew of subcontractors wearing somebody else’s shirt. When you call about a gate opener that won’t close on Renfro Street or a slide motor grinding near Chisenhall Park, the person who answers can actually tell you what to expect. Not a script. A person.

Burleson sits in a strange spot for gate work: the I-35W corridor is dense suburban HOA territory, and just a few miles east on 76028 you’re in pipe-gate ranch country. We service both ends of that spectrum every week. Our crew carries parts for Gate Motor & Opener brands common to both: LiftMaster, Linear, Viking, DoorKing, Ghost Controls, and several more. If you live in a master-planned community off Alsbury or McAlister, we know the HOA approval drill. If you’re on acreage off Farm Road 731, we know how a tube-steel gate reacts to clay heave. Same crew, same truck, same standard.

Every job we do in Burleson carries our 90-Day Done Right Promise in writing. If it isn’t right, Hal comes back. That’s not a coupon. It’s stamped on the invoice because he means it. We also offer a free second opinion on any written estimate, no trip charge inside the county, $40 off repairs over $200, and a permanent 10% discount for seniors and veterans. Quoted price is agreed before we touch a wrench. Always.

Our Gate Motor & Opener Services in Burleson

Motor Installation

Installing a gate motor in Burleson means matching the operator to the gate’s weight, swing, and what the HOA will sign off on. A builder-grade wood privacy gate that’s been soaking up Blackland Prairie moisture for 12 years is not a candidate for a cheap bolt-on operator. We measure, straighten, reinforce, and then mount the motor. Most full Gate Installation - Burleson projects run $650-$1,400 depending on operator class and gate condition.

Motor Repair

When you need Burleson Gate Repair, the first thing we check is the post, not the circuit board. Clay heave racks posts out of plumb, and the motor trips its obstruction sensor repeatedly until something burns. Motor repair here typically runs $180-$400 for board swaps, limit switch replacement, gear service, or sensor realignment. If the post is the problem, we tell you that up front and fix both.

Linear Motor

Linear is one of the most common operator brands we touch in Burleson’s acreage east side and in the HOA neighborhoods both. Linear motors are workhorses, but they’re sensitive to voltage drops and misaligned limit cams. We stock common Linear parts at our Burleson Gate Parts & Welding shop for local calls. A Linear motor repair or replacement typically runs $250-$650 depending on the model and whether the arm or chain drive needs replacement.

Slide Motor

Slide gate operators are common on Burleson properties where a swing gate would eat too much driveway space or where the HOA specifies a sliding entry. A slide motor install starts around $700 and goes up based on gate weight and run length. We also repair existing slide systems: bad drive chains, worn rollers, bent tracks, and operators that grind instead of glide. If your slide gate shudders halfway open, that’s a track or roller issue we can usually fix the same visit.

Trusted Brands We Service in Burleson

We’re certified to service nine major gate operator brands, and in Burleson we see a lot of LiftMaster, Linear, Ghost Controls, and DoorKing units across both the HOA subdivisions and the ranch gates east of town. Because we keep common parts stocked and have a local shop relationship for the rest, turnaround on Burleson repairs is fast. We don’t tell you to replace a Viking or DoorKing board when a capacitor or relay is the actual failure. Repair-first is how we’ve worked since 2001.

Common Gate Motor & Opener Problems We See in Burleson Homes

• Clay heave racking posts out of plumb. Burleson sits on Blackland Prairie expansive clay. Wet winters swell it; baking summers shrink it. Gates lean, the rack and pinion binds, and the operator trips its obstruction sensor on a loop. We fix the post first.
• Ice storm damage from February 2021 events. North Texas ice freezes swing gates to the ground. When someone force-opens one, shear pins snap and gears strip inside the operator. We still see the ripple effect of those storms on older Burleson motors.
• Builder-grade wood gates rotting at the bottom rail. The 2005-2015 subdivision boom gave Burleson thousands of standard wood privacy gates. They’re now 10-15 years old, with bottom rails rotting from soil contact. A motor mounted to a gate that’s pulling itself apart overheats fast.
• Loop detector failures after heavy rain. Burleson gets serious thunderstorms in spring and fall. Water intrusion in the sawcut loop or a shifted driveway sensor makes the gate refuse to open or open randomly. This is one of the first things we check on any no-open call.

Pricing for Gate Motor & Opener in Burleson, TX

HOA Architectural Approval and Gate Operators in Burleson

If you live in a Burleson subdivision with a homeowners association, your gate operator project doesn’t start with a motor. It starts with architectural approval. Most Burleson HOAs regulate gate style, height, finish, and whether the operator mechanism can be visible from the street. A surprising number of gate motor installs we see have to be redone because someone skipped that step and mounted a shiny operator arm on a gate the board never approved.

We’ve worked with Burleson HOA management companies enough to know the rhythm: submit the spec sheet, the gate drawing, and the finish sample, then wait for the next review cycle. We prepare that documentation as part of the quote, so you don’t have to translate a motor manual into HOA language. If your community has a shared entry system with resident access controls, we coordinate with the management company on the operator’s access protocol: keypad codes, transmitters, phone-entry, or intercom. Shared systems fail differently than single-home operators. When a visitor kiosk stops triggering the exit loop at a Burleson gated community, the problem is usually a sensor, a board, or a power supply, and we trace it end to end.

Here’s a field note that tells you how Burleson work actually goes. We got a call from a property in the 76028 corridor near I-35W where a LiftMaster LA400 swing gate operator had stopped responding entirely. Our tech found the hinge post racked 2.5 inches out of plumb from Blackland Prairie clay heave. The gate was fighting the operator every cycle. The fix wasn’t a new board; it was a new post footing, realignment, and re-mounting the operator with fresh safety photocells. The HOA annual inspection passed afterward. That’s the sequence most national gate companies skip, and it’s exactly why the motor fails again six months later.

The bigger pattern across Burleson’s I-35W subdivisions is that the wave of builder-grade wood privacy gates installed between 2005 and 2015 is aging out all at once. Bottom rails rot from clay soil contact. Galvanized hinges corrode in the region’s moderately hard water. Drop-rod latches seize. A disproportionate share of our 76028 calls are not isolated motor repairs; they’re full gate rebuilds on 10-to-15-year-old hardware that was builder-grade to begin with. Mounting a new operator on a gate like that is throwing money away. We rebuild or replace the gate first, then mount the operator. It costs more up front and far less over the next five years.

Battery Backup and Intercom Integration for Burleson Gates

North Texas weather is hard on power lines. Ice storms knock out transformers, and a Burleson gate with no battery backup becomes a very heavy paperweight during the exact weather when you most want it closed and locked. We add battery backup to existing LiftMaster, Linear, Viking, and DoorKing operators regularly. The setup keeps the gate operating through short outages and gives you manual release guidance for long ones. If your HOA or insurance company asks about backup power for the entry gate, we can provide the spec for approval.

Intercom integration is the other piece Burleson HOAs and acreage owners ask about. A visitor panel at the street that calls your phone, a keypad for delivery drivers, or a hardwired intercom to the house: all of these connect to the gate operator’s open relay. We wire intercoms into existing operator boards so the gate opens without giving every visitor a spare remote. For shared entries at Burleson gated communities, we coordinate the install and the access code system with the management company from day one.

We Also Serve Cities Near Burleson

Gatewood Fence & Gate serves Johnson County and the southern DFW edge, including gate motor and opener work in Crowley, Everman, Rendon, and Joshua. If you’re on the border of two towns or out on a county road, call us anyway. Our Burleson crew covers the surrounding area without the awkward “we don’t service your street” conversation.

FAQs - Gate Motor & Opener in Burleson

Call Gatewood Fence & Gate for Burleson Gate Motor & Opener Work

If your gate motor is dead, grinding, or flashing a code you can’t identify, call (877) 610-2993. A live person answers, day or night. We’ll set a window, show up in it, and give you a written price before any work starts. Free estimates. No trip charge inside the county. And the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop, and he stands behind every gate we touch in Burleson.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Burleson, TX and the surrounding Johnson County communities.