Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Burleson
Gate installation in Burleson, TX means matching the right gate to the right property, and that split is wider here than most places. A single week might have us setting a 400-pound ornamental iron driveway gate in a master-planned 76028 subdivision off I-35W, then heading east to hang a working tube-steel pipe gate on a Johnson County acreage where the goats test every weld. We’ve done both since 2001. Hal Gatewood owns the shop, the name’s on the truck, and when you call (877) 610-2993 a live person answers. We quote the price before any work starts, and we stand behind every installation with our 90-Day Done Right Promise in writing.
Why Gatewood Fence & Gate Is Burleson’s Preferred Gate Installation Company
Burleson homeowners between the subdivisions along Renfro Street and the ranch roads past County Road 920 call us because we show up with a welder, not just a parts catalog. Hal’s been fixing gates since 2001 and the crew can weld on site in your driveway, so a sagging swing gate doesn’t get hauled to some shop across the metro. We serve Burleson from our DFW-area office, and local customers get response times measured in hours, not days. The 90-Day Done Right Promise isn’t buried in fine print. If the gate isn’t right, one call brings Hal back. No runaround. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
We also answer the phone around the clock. When your driveway gate won’t open at 6:30 on a Tuesday morning and your garage is blocked, you talk to a person, not a voicemail. Seniors and veterans get a permanent 10% discount. You don’t have to ask twice.
Our Gate Installation Services in Burleson
These are the installation jobs we handle most across the 76028 and 76097 zip codes, and what makes the Burleson versions of each one particular.
Driveway Gate
A driveway gate in Burleson’s I-35W corridor subdivisions usually means an ornamental iron double gate on a dedicated concrete pad. In the ranch country east of 76097, it means a 16-foot tube-steel swing gate with a bolt latch and maybe a solar opener. We build both. The shared challenge is the Blackland Prairie clay underneath: shallow footings heave within the first wet winter, and that’s why we go deeper than the builder did.
Pedestrian Gate
Wood pedestrian gates built during the 2005-2015 subdivision boom are failing on a cycle right now. Bottom rails rot where they touch soil, hinge screws loosen in shrunken post holes, and the gate drags. We replace the gate and the post together when needed. Fix the panel without the post and you’ll fix it twice.
Sliding Gate
Sliding gates work well where a swing gate would cross a slope or eat driveway space. In Burleson, that’s common on the newer 2000s-era lots that push houses close together. We install track and cantilever sliding gates, and we run the power correctly: conduit in the ground, not extension cords wrapped around the post.
Swing Gate
Swing gates remain the standard for Burleson acreage. A 14-foot pipe gate on a deadman post is simple, but the hardware matters. Our Gate Installation team sizes hinges to the actual gate weight, not whatever came in the box. A gate sags in the hinge post, not in the middle, and that’s where we start.
Security Gate
Security gates for Burleson homes often mean adding an automatic operator, a keypad, and safety photocells to an existing manual gate, which is why our Gate Access Control in Burleson service handles these retrofits regularly. That’s retrofit work, and we do it often here because most original builds treated the gate as manual. We trench the conduit, set the operator posts level, and wire it so it closes on its own without failing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burleson
We’re certified to work on nine major gate brands, and for Burleson customers we keep the common parts local: FAAC operators, BFT control boards, Linear accessories, and Viking hardware are all brands we service and stock parts for. When a builder-grade operator dies on an HOA-spec gate in 76028, we’re not waiting a week for a part to ship from a warehouse. We carry the pieces that fail most. That gets your gate working again faster.
Common Gate Installation Problems We See in Burleson Homes
- Shallow post footings that heave in Blackland Prairie clay. Burleson’s clay swells in wet falls and contracts in dry summers. Posts set 18 inches deep shift within a year; new gates rack and sag before the first annual service check.
- Builder-grade operators sized wrong for heavy wood gates. The operators installed during the 2005-2015 boom were specced for lightweight panels. Burleson’s HOA-style solid cedar gates need heavier torque, and that’s exactly what they didn’t get.
- Missing power runs for automation. Most Burleson subdivision homes were built with manual gates. Retrofitting an automatic opener means trenching through clay that heaves and cracks the run within a few seasons, unless the conduit’s laid right the first time.
- Bottom-rail rot from soil contact and hard-water hinge corrosion. Burleson’s moderately hard water accelerates corrosion on galvanized hinges, and the clay soil holds moisture against the gate’s bottom rail. Both failures show up around year eight or ten, right as the whole gate lets go.
Pricing for Gate Installation in Burleson, TX
Here’s honest money, the way we quote it in Burleson: a new single wood or iron pedestrian gate runs $450-$950 including a properly set post. A driveway swing gate, manual, runs $1,200-$3,400 depending on width, material and whether we’re hanging one or two panels. Adding an automatic operator with a keypad and safety photocells to an existing gate runs $1,600-$3,800, including the trenching and conduit run. A full tube-steel ranch gate on acreage starts around $800 for a 12-foot opening and goes up with operator and solar options. Free estimates, no trip charge inside the county, and the price is agreed before any work starts. Seniors and veterans get 10% off permanently. Call (877) 610-2993 and we’ll quote it straight.
We Also Serve Cities Near Burleson
If your property is just outside the Burleson line, we cover it. We handle gate installation in Crowley, Everman, Rendon, and Joshua every week. Several of those are Johnson County towns with the same clay, the same ranch-and-subdivision mix, and the same need for a name you can verify. One call to Gate Installation in Burleson covers all of them.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Burleson
Burleson sits on Blackland Prairie clay that shrinks and swells hard through the seasonal moisture swing: long dry summers, then sudden wet falls. A post set at 18 inches will move within a wet-dry cycle. We set gate post footings at 30 inches or deeper here, especially on the heavy clay zones south of Renfro Street and east along County Road 920. That’s the difference between a gate that stays plumb and one that racks by spring. Need a post reset? Call (877) 610-2993 for a quote.
Yes, in most 76028 subdivisions it’s a straightforward retrofit, but it requires trenching and conduit, because original builds treated the gate as manual and left no power at the post. Our Gate Installation crew runs the line properly through the clay, sets the operator post level, and wires in the keypad and safety edges. A retrofit like that on a Burleson driveway runs $1,600-$3,800. We quote it free before work starts, and the price doesn’t change.
For Johnson County acreage with cattle or goats, a tube-steel swing gate with a deadman post, heavy barrel hinges, and a bolt latch outlasts anything else we install here. Our Gate Parts & Welding in Burleson happens on site, which matters because a custom-width gate between cedar posts can’t just be ordered off a shelf. We’ve hung 12-, 14-, and 16-foot pipe gates across the eastern half of 76097. The hinges get sized to the gate, not the other way around. Call (877) 610-2993 to talk it through.
An undersized operator on a heavy wood gate shows the same three symptoms every time: it hums and stalls at midswing, the clutch or gear strips within three or four years, and the gate drifts off the stop when it closes. If your 76028 gate does any of those, the motor was specced for a lighter panel than your HOA required. We replace or upsize in one visit, with a FAAC or LiftMaster operator matched to the actual gate weight. We’ll tell you if a smaller fix will hold, or if the door’s worth replacing. Estimates are free.
It’s the water and the soil. Burleson’s groundwater has moderately hard mineral content, and when wet clay sits against the hinge plate through the winter, it accelerates the corrosion on galvanized steel. Dallas homes don’t see the same prolonged soil contact at the hinge line. We swap Burleson gates to heavier galvanized or stainless steel hinges, and we shim them off the post. Corroded hinge? It’s a $340-$600 fix to replace with durable hardware. Call (877) 610-2993 and we’ll get you on the schedule.
We replaced a builder-grade wood pedestrian gate in a 76028 subdivision near I-35W where the bottom rail had rotted from contact with the clay soil and the hinge post had pulled two inches out of plumb. Our crew set a new post footing 30 inches deep, installed a LiftMaster gate operator with a safety photocell, and ran new conduit for the keypad entry, correcting the power run that was never put in when the house was built in 2012. That’s the kind of job that only makes sense when you’re standing in the yard seeing it. Burleson, we’re here every week.
If you’re in Burleson and you need a gate installed, replaced, or automated - or you need Gate Repair - Burleson - call (877) 610-2993. Live person, 24/7. Free estimate, no trip charge inside the county, and the 90-Day Done Right Promise on everything. Hal Gatewood’s name is on the invoice and the shop.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Burleson since 2001.