Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Woodside
Gate installation in Woodside follows a rhythm the national outfits don’t understand. A driveway here isn’t a 20-foot strip of concrete off a cul-de-sac. It’s a 500-foot run under redwood canopy, past a horse paddock, ending at an estate entry where the gate has to look like it belongs on the property and work like ranch infrastructure. We replace hinge posts, weld frames on site, rerun low-voltage conduit that gophers have chewed through, and mount operators that can move a 16-foot steel gate without complaining. If you’re in Woodside and the gate needs to be right the first time, call (877) 610-2993 for a free estimate. Hal Gatewood has been at this since 2001, and he still answers the phone himself.
Why Gatewood Fence & Gate Is Woodside’s Preferred Gate Installation Company
We work the whole 94062 zip code, from the older ranch properties off Canada Road to the newer hillside builds above the town center. The common thread is that every job involves something custom. When we show up to a Woodside property, we expect horse trailers, long driveways, and irrigation lines we need to avoid. We also expect a homeowner who has already dealt with a company that quoted one price over the phone and charged another at the door. That’s not how we work. The price gets quoted and agreed before any work starts, in writing, and it doesn’t change unless you ask us to add something.
Hal Gatewood’s name is on the shop and on every invoice. His crew shows up in uniform, background-checked, and they’re the same faces you’ll see again at the grocery store in Redwood City or Menlo Park. We’re not passing through. When a Woodside homeowner calls about a sagging double gate or a Viking operator that faults every time a deer crosses the beam, we know exactly what we’re walking into because we’ve worked this fog belt for decades.
Our Gate Installation Services in Woodside
Swing Gate Installation
Swing gates dominate Woodside because they fit the equestrian look most estates want. But a swing gate on a hillside pulls at its hinge post differently than one on flat ground. We set posts with stainless anchors and oversized footings, because a post that shifts an inch puts the whole gate out of plumb and burns out the operator. If you’ve got a double swing gate that sags, we fix the post before we hang the gate. Fix the panel without the post and you’ll fix it twice.
Sliding Gate Installation
Sliding gates are common on Woodside properties where the driveway slopes or where a swing gate would block the turnaround. The catch here is debris. Redwood needles and oak leaves pack into the track and foul the photo-eye lenses. We install slide gates with raised tracks, sealed bearings, and photocells mounted where canopy drip won’t coat them. It’s the difference between a gate that works in November and one that faults every time the wind blows.
Security Gate Installation
Security gates in Woodside usually mean more than a physical barrier. They mean keypads at the road wired back to the house, intercom integration, and operator boards that talk to an estate security system. That’s where our Gate Installation experience matters. We’ve pulled hundreds of feet of low-voltage wire down driveways off Canada Road and Portola Valley Road, and we know what happens when that wire gets chewed or shifted. The gate has to fail safe, and the access control has to work every time.
Pedestrian Gate Installation
Pedestrian gates on Woodside estates look simple and rarely are. They’re often set into stone pillars, wired for electronic release, and matched to a driveway gate that’s 20 years old. We fabricate and weld pedestrian gates on site so they match the existing ironwork, and we do it without making a mess of the pillar. On equestrian properties, we also build and hang paddock and pasture gates that take abuse from horses and hold up to the wet side of the Santa Cruz Mountains.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Woodside
We’re certified to service nine gate brands, including FAAC, Viking, and BFT, and we stock parts locally so a Woodside repair doesn’t wait on a distributor in Texas. Viking operators show up a lot on older equestrian estates, and we know their quirks. FAAC and BFT are common on newer builds where the architect specified a particular operator platform. We don’t push one brand. We match the operator to the gate weight, the driveway length, and how often a horse trailer needs to pass through.
Common Gate Installation Problems We See in Woodside Homes
- Rusted hinge posts and gate frames. Fog-belt moisture and redwood canopy drip corrode painted steel years faster than anything inland. We see hinge posts that look fine above ground and are paper-thin below the soil line. Galvanized steel and stainless fixings are the only spec that lasts here.
- Gopher-chewed underground wiring. Woodside’s rural lots mean gophers tunnel under gate areas constantly. They chew through PVC conduit and the low-voltage wire inside it, killing the keypad or operator without warning. This is a Woodside-specific problem; a flat suburban Menlo Park tech almost never sees it.
- Track-mounted slide gates clogging with organic debris. Redwood needles and oak leaves are relentless. If the track isn’t cleared and the photo-eye lenses aren’t wiped during installation, you’ll get nuisance call-backs all winter. We build the install around this reality.
- Double gates twisted by horse trailer use. Heavy equestrian traffic torques the gate leaves, and the hinge posts go out of plumb. You can’t just hang a new operator on a twisted gate. The sag correction has to happen first, and that means resetting the post footing, not shimming the panel.
Pricing for Gate Installation in Woodside, CA
A basic single swing gate install on a flat driveway in Woodside typically runs $2,800 to $5,500. A double swing gate with an operator runs $6,000 to $12,000, depending on gate weight and post work. A sliding gate with an operator on a hillside driveway runs $7,500 to $15,000, because the foundation and track work are more involved. A full security gate with keypad, intercom, and access control integration runs $10,000 to $25,000 and up. Pedestrian gates run $1,800 to $4,500. These are real numbers for this market, and the price is agreed in writing before we start. Call (877) 610-2993 and we’ll give you an exact quote for your driveway. Estimates are free.
One more thing worth saying plainly. On a repair job over $200, we take $40 off. There’s no trip charge inside the county. Seniors and veterans get a permanent 10% discount. Bring us a written estimate from another company and we’ll give you a free second opinion. That’s how Hal runs the shop.
We Also Serve Cities Near Woodside
We work Gate Installation in Woodside every week, and we also serve Menlo Park, Redwood City, San Carlos, and Atherton. Same crew, same warranty, same live person answering the phone. If you’re a few miles down the road, the 90-Day Done Right Promise still applies in writing on every job.
Serving Woodside, CA - Our Local Coverage Area
We’re based in the Woodside area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Woodside
Woodside sits in the fog belt at the base of the Santa Cruz Mountains, which means significantly more moisture than Menlo Park or Redwood City get. Add redwood and oak canopy drip onto iron hardware and you’ve got a corrosion environment that inland Peninsula neighborhoods don’t experience. We spec galvanized steel and stainless fixings on Woodside installs for this reason. If your gate is already rusting through, call us for an honest assessment of whether it can be welded and re-finished or needs replacement.
Yes, and it happens constantly. Gophers chew through PVC conduit and the low-voltage wire inside it because the wire’s insulation has a taste they respond to. On a long Woodside driveway, that conduit may run 500 feet or more to a keypad at the road. When it gets chewed, the operator or keypad dies without warning. We can rerun the wire through armored or concrete-encased conduit that gophers won’t get through. This is a regular call for us off Canada Road and throughout the 94062 zip code.
For Woodside’s moisture and temperature swings, we favor operators with sealed, weather-rated control boards and corrosion-resistant housings. FAAC and BFT make units that hold up well here, and Viking has a solid track record on older equestrian properties. The bigger variable is installation. If the board gets mounted where fog drip accumulates, even a good unit fails early. We mount boards in sealed enclosures with environmental protection matched to the site. Call (877) 610-2993 and we’ll tell you what fits your driveway and gate weight.
Yes, and we do it regularly. The challenge on a Woodside hillside is that a wide gate exerts more torque on the hinge post, which means the footing has to be deeper and the post has to be set with stainless anchors. We also account for the turnaround space your trailer needs. The gate clearance, post placement, and operator position all get designed around your equipment and animals, not around a standard spec sheet.
Your photo-eye safety sensors are seeing redwood needles or oak leaves and reading them as an obstruction. On a track-mounted slide gate, debris also packs into the track and causes intermittent trips. During installation we position photocells out of the direct debris path and use canopies or shields where needed, and we clear the track and lenses before we leave. If your gate is faulting on every windy day, we can fix it. One call to (877) 610-2993 gets a live person, not a voicemail.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Woodside since 2001.