Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Woodside
Gate repair in Woodside usually comes down to one of three things: a hinge post that has shifted in the hillside clay, a control board that predates modern safety sensors, or underground wiring that a gopher finally got to. Most jobs run $180 to $340 for work like hinge or alignment repairs, and we can typically get a tech to your driveway the same day you call. If you are off Canada Road or up in the Mountain Home Road hills, we know the drive, we know the soil, and we know what tends to fail out here. Call (877) 610-2993 and you will talk to a live person, not a queue.
Key takeaways:
- Hinge and post repairs in Woodside typically run $225-$475 depending on post condition.
- Same-day response is available for most Woodside call-outs, including emergency gate failures.
- We hand you a written price before any work starts, and we stand behind it with the 90-Day Done Right Promise.
- On-site welding means your gate stays in your driveway when we fix it.
Why Gatewood Fence & Gate Is Woodside’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop, on every invoice, and on the 90-Day Done Right Promise that goes with every job in writing. We are not a nationwide operation with a rotating cast of techs. The person who answers your call is the person who decides whether your hinge post gets welded or replaced, and that same person will be the one you run into at the feed store later that week.
Woodside homeowners tend to do their homework. They check the license, they want the address, and they want to know who they are actually hiring. That is exactly why we publish all of it. When we say we serve Woodside, we mean we drive in from our Bay Area office, park in your driveway, and get to work. We have repaired estate gates off Portola Road, welded hinge barrels on equestrian ranches near Old La Honda, and rewired keypads up long gravel driveways where the conduit runs 80 feet from the road to the house. There is not much we have not seen in the 94062.
We carry our reputation locally. A gate that sags in the hinge post, not in the middle, is where we start. And if something is not right after we leave, one call brings us back. No argument, no fine print.
Our Gate Repair Services in Woodside
Every Gate Repair call starts with the same question: what is actually failing? On Woodside properties that means looking at the post, the operator, the wiring, and the safety sensors before touching anything else. Here is how we handle the four problems we see most on local estates and ranches.
Electric Gate Repair
Electric gate repair in Woodside often comes down to two culprits: a control board that gave up after a decade of fog-season humidity, or a low-voltage line that has been chewed, crushed, or corroded. We service operator brands like Viking, FAAC, and Linear, and we stock common control boards and receiver kits so we are not waiting on a parts truck from Fresno. If the board is obsolete and cannot talk to modern photocells, we will tell you straight: some are worth retrofitting, some are not.
Automatic Gate Repair
Automatic gate repair on a Woodside estate frequently means troubleshooting a gate that reverses halfway closed or refuses to respond to the keypad at the road. We check loop detectors, photo-eye alignment, receiver range, and wiring integrity in that order. Redwood duff from overhanging canopy finds its way onto photo-eye lenses more than you would think, and we clean and recalibrate sensors on every automatic gate visit so you are not resetting a breaker at midnight.
Hinge & Post Repair
This is the repair Woodside hill properties need more than any other. The clay soil moves, gophers tunnel under the footing, and a 400-pound iron gate eventually leans enough to scrape. We weld on site, cut and re-seat post footings, and sleeve or replace hinge barrels as needed. A gate sags in the hinge post, not in the middle, and that is where we start. Fix the panel without the post and you will fix it twice.
Gate Realignment
Gate realignment in Woodside is rarely a simple adjustment knob. On older swing gates the post has usually drifted, or the hinge leaves have worn into an oval. We level the gate, re-bush or rebuild the hinges, and set the open and close limits properly on the operator. Winter is when we see the most calls because the wet clay expands, the gate drops a quarter inch, and it starts scraping the driveway. We correct it before the operator burns itself out trying to compensate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Common Gate Repair Problems We See in Woodside Homes
- Obsolete control boards on legacy operators. Many Woodside gates from the late 1990s and early 2000s run on LiftMaster or Viking boards that no longer accept modern safety photocells. Some can be retrofitted, some should be replaced, and we will show you the math either way before you spend a dollar.
- Shifting hinge posts on hillside lots. Soil creep and gopher activity along the Santa Cruz Mountain foothills push posts out of plumb. The gate scrapes, the motor strains, and the fix is in the post, not the panel.
- Intermittent keypad and intercom failures. Long conduit runs from the road to the house is where Woodside’s underground wiring problems live. Moisture, clay movement, and rodent damage inside the conduit causes call boxes that work on Tuesday and fail on Friday.
- Photo-eye falsing from debris. Oak and redwood canopy drops leaves, needles, and dust onto safety sensors every week. The gate reverses, beeps, and refuses to close. A cleaning and recalibration usually solves it during the same visit.
Trusted Brands We Service in Woodside
We are certified to work on nine major gate operator brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Woodside specifically, we keep FAAC, Viking, and BFT parts in the truck more often because those are the operators we see on estate installs along Portola Road and throughout the 94062. That means fewer parts runs and fewer appointments where we show up, diagnose, and have to come back next week.
Pricing for Gate Repair in Woodside, CA
Here is what Woodside gate repair actually costs in this market, with real ranges:
- Hinge barrel or hinge leaf repair on a swing gate: $180-$320
- Post re-seat or re-weld on a hillside swing gate: $350-$650 depending on footing condition
- Electric gate troubleshooting, sensor realignment, or loop detector replacement: $195-$395
- Control board replacement or retrofit: $275-$750 depending on the operator and board
- Underground keypad or intercom wire repair: $225-$525 depending on conduit length and access
You will get a written price before any work begins, and that price does not change at the door. No trip charge inside the county. Seniors and veterans get 10% off every repair, and any repair over $200 gets $40 off. Call (877) 610-2993 and we will quote the job over the phone, then confirm it on site before touching a tool.
We Also Serve Cities Near Woodside
Our Gate Repair team works throughout the southern Peninsula, so if you have a property in Menlo Park, Redwood City, San Carlos, or Atherton, we cover those too. Woodside is home base for the kind of estate gates and equestrian entries we specialize in, but the same crew and the same 90-Day Done Right Promise extend to every neighboring city we serve.
Serving Woodside, CA - Our Local Coverage Area
We’re based in the Woodside area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Woodside
Yes, in many cases a 25-year-old Viking or LiftMaster swing gate can be retrofitted with a modern control board and photocell kit without replacing the arm, motor, or chassis. We do this regularly on Woodside properties where the original iron work is worth keeping, and the retrofit typically runs $275-$750 depending on the operator model and what wiring is still serviceable. The honest answer is that some boards are genuinely dead-ends, and we will tell you if replacement is the cheaper call. Call (877) 610-2993 and we can usually tell you over the phone which situation you are in.
Because the low-voltage wiring running from the road to the house is sitting in conduit that collects moisture after heavy rain, and Woodside’s clay soil plus gopher activity means that conduit gets cracked, chewed, or pulled apart more often than flat Peninsula lots. The keypad works when the ground is dry and shorts when it is wet. We locate the break, splice or rerun that section of wire, and seal the conduit so it stops happening every winter.
It is almost always the post. Winter rain swells the clay soil, the post moves, and the gate drops. We have seen this on nearly every hillside estate in Woodside from Portola to La Honda. The repair is to re-seat or re-weld the post footing and then correct the gate alignment, which on Woodside properties usually runs $350-$650 depending on how far the footing has wandered. Fix the post once and the winter scrape stops.
That reversing is usually a photo-eye sensor or loop detector issue, not the motor. On Woodside properties with heavy redwood and oak canopy, debris lands on the photo-eye lenses and the gate thinks something is in the way. We clean, align, and recalibrate the sensors on every visit, and if the loop detector is sun-baked or waterlogged, we swap it. Depending on what we find, this repair runs $195-$395, and we can often handle it the same day.
Yes, and this is a standard repair for us in Woodside’s equestrian areas. We cut out or drive out the rusted pins, re-bush the hinge barrels if they are worn oval, and weld new bar stock hinges in place on site. Depending on the gate weight and condition, this runs $180-$320. You do not have to haul the gate off the property, and a live person is on the phone any time, day or night, at (877) 610-2993.
One Thing That Only Applies to Woodside
Woodside sits in the fog belt at the base of the Santa Cruz Mountains and gets noticeably more moisture than Menlo Park or Redwood City. That coastal fog and extra rain accelerates rust on iron gate hardware, hinges, and underground conduits in a way that a flat suburban lot two miles east simply does not experience. Then there is the soil movement. We see 50 to 100 feet of low-voltage conduit running from the estate gate to the keypad at the road, and gophers plus clay creep pull that conduit apart over time. On a Woodside estate off Mountain Home Road, our crew revived a 20-year-old Viking swing gate whose hinge post had shifted in the clay soil. We cut and re-welded the post footing, corrected the sag, and replaced a sun-baked loop detector, then cleaned the photo-eye lenses of redwood debris that had been triggering nuisance reversals. That combination of soil movement, moisture, and organic debris is the Woodside failure profile, and it is not something a repair call from a flat suburban neighborhood ever has to deal with.
Call for Gate Repair in Woodside, CA
If your gate is sagging, intermittent, dead, or just making a noise it did not make last month, call (877) 610-2993. We answer live, 24/7. We give you an honest price over the phone, confirm it in writing before any work starts, and then fix the gate right where it sits, often in one visit. Hal Gatewood has been doing this since 2001, and the 90-Day Done Right Promise is in writing on every job. You can call the shop, or you can drive to it. Either way, you get the same person, the same price, and the same promise.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Woodside, CA.