Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Woburn
Gate installation in Woburn comes down to one thing: knowing what’s under your feet and what’s around your property line. We deal with clay-heavy till that heaves posts every spring, shared driveways with rights of way that can void an install if you swing over a neighbor’s line, and commercial corridors along Route 128 where a gate that won’t open costs real money. A new driveway gate in Woburn typically runs $1,400 to $5,800 installed, and most residential jobs are completed within one to two days once materials are on hand. Call (877) 610-2993 and Hal will quote your gate to the dollar before any work begins.
Why Gatewood Fence & Gate Is Woburn’s Preferred Gate Installation Company
Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Since 2001, we’ve installed and repaired gates across Middlesex County, and a good portion of our week is spent in Woburn’s 01815, 01801, and 01888 ZIP codes. We know the difference between a cape on the west side with a shared driveway and a Commerce Way loading dock that needs a slide gate built around truck traffic.
We’re the company facility managers call when a LiftMaster or FAAC slide operator fails at New England Executive Park and the dumpsters can’t get emptied. And we’re the company homeowners call when they’ve had enough of propping a gate open with a cinder block. Background-checked crew, uniformed, with a live person answering the phone around the clock, not a voicemail queue three states away.
Every job carries the 90-Day Done Right Promise in writing. If it isn’t done right, one call brings Hal back. No runaround. We quote a price, you agree to it, and that’s the price.
Our Gate Installation Services in Woburn
Driveway Gate Installation
Most Woburn driveways on the residential side are post-WWII colonials and capes from the 1950s through the 1970s. That means narrow driveway mouths, sometimes under 10 feet, and often a shared paved way with a right of way that runs straight down the property line. A driveway gate here isn’t a slap-it-in job. We check the setback, the right of way, and the frost depth before we even order steel. A single swing driveway gate in Woburn runs $1,400 to $3,200. A double gate runs $2,800 to $5,800.
Pedestrian Gate Installation
Small pedestrian gates get ignored until the post rots and the gate drags a crescent into the walkway. We build these from new materials or reuse your existing panel if it’s still true. Pedestrian gates in Woburn average $600 to $1,500 installed, depending on whether it’s a simple aluminum walk gate or a steel frame with a coded latch. We see a lot of these where a driveway gate already exists and the homeowner wants a separate walk-through so the big gate isn’t cycling open every time a delivery comes.
Sliding Gate Installation
If you’ve got a tight Woburn lot, you probably can’t swing a gate. A slide gate is the answer when the driveway runs parallel to the house and there’s a fence line to tuck the gate travel into. We install Viking and Ghost Controls slide operators most often on residential jobs, and LiftMaster or DoorKing on the commercial side. Sliding gate installations in Woburn run $2,200 to $6,800 for a single slide, more for custom lengths or heavy commercial duty. The critical part is the footing: in Woburn’s clay till, you pour below frost depth or the track binds after the first winter. We auger to 48 inches minimum on every slide gate post.
Swing Gate Installation
Swing gates are the traditional Woburn look, and they read correctly on older homes with ornamental or chain-link frontage. The catch is space. On a standard 12-foot driveway, you need the gate leaf to clear the car and the sidewalk without crossing the neighbor’s airspace. A cantilever or swing gate installed with proper hinges and a buried post footing in this soil runs $1,800 to $4,500. We also convert a lot of failing swing gates to slide gates when the lot doesn’t have room for the arc. That’s a real fix, not a band-aid. Fix the panel without the post and you’ll fix it twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Woburn
We’re certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. But what matters more is that we keep parts on the truck: photocells, edge sensors, loop detectors, gear sets, and replacement arms. For Woburn customers, that means a repaired or installed gate doesn’t wait a week on a freight drop. Viking and Ghost Controls work well for residential Woburn gates, while DoorKing and LiftMaster hold up on the heavier commercial doors we see around Route 128. If you’ve got an operator from a brand we didn’t list, call anyway. Hal has been welding and wiring since before most of these app-based openers existed.
Common Gate Installation Problems We See in Woburn Homes
- Shared driveway swing gates crossing the right of way. This is a Woburn-specific trap. Two houses, one paved way, and someone hangs a swing gate that arcs over the neighbor’s half. It works for about a year, then a title review or a sale forces it down. We check the right of way setback before doing anything.
- Shallow slide gate footings in clay-rich till. Post footings poured at 18 or 24 inches in Woburn’s clay glacial till heave every freeze-thaw cycle. The track binds, the gate grinds, and the operator burns out. We pour at 48 inches below grade, and we don’t skip it.
- Automated operators installed without safety edges or photocells. A new automatic gate in Woburn needs entrapment protection. A safety edge, a photocell, or both. If the installing company skips it, the first close-on-a-vehicle incident becomes a stop-work order on a commercial property, and an insurance headache for a homeowner. We install UL-rated edges and test them in front of you before the job is done.
- Corroded hinges on gates near Routes 38 and 3. Road salt spray accelerates rust on gate hinges and latch hardware, especially on driveways within a stone’s throw of a treated road. We replace with stainless or powder-coated hardware and weld where it extends service life, rather than charging you for a new panel that doesn’t need replacing.
Pricing for Gate Installation in Woburn, MA
Here’s a straight answer. A pedestrian gate in Woburn runs $600 to $1,500 installed. A single swing driveway gate runs $1,400 to $3,200. A double swing runs $2,800 to $5,800. A single slide gate runs $2,200 to $6,800. A commercial security slide gate on the Route 128 corridor commonly lands between $5,000 and $15,000 depending on gate length, operator duty, and access control hardware. The price we quote is the price you pay, agreed before we order a single part. No trip charge inside the county. Seniors and veterans get a permanent 10% discount, and any repair over $200 gets $40 off. We also offer a free second opinion on any written estimate. Call (877) 610-2993 and Hal will walk the job with you and put numbers down on paper.
We Also Serve Cities Near Woburn
We work Woburn every week, and the same crew handles gate installation in Woburn, Winchester, Stoneham, Burlington, and Reading. If you’re a few minutes over the line, that’s fine. The trip charge is waived inside Middlesex County, and our Gate Installation calendar keeps a slot open for local jobs.
Serving Woburn, MA - Our Local Coverage Area
We’re based in the Woburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Woburn
A slide gate that stays within your own property doesn’t typically require city approval, but a shared driveway means your abutter’s right of way is affected by anything you place along that line. We start by checking the deed description and the recorded easement. A swing gate over a shared way is a problem. A slide gate on your side, with its track and posts inside your pins, usually clears. That said, if we see any ambiguity, we recommend a written sign-off from the neighbor before we dig. It’s cheaper than a title review later. Call (877) 610-2993 and we’ll look at your deed with you.
Woburn’s clay tit holds water, and when it freezes and thaws thirty-plus times in a winter, it expands and contracts enough to lift concrete footings laid too shallow. The post moves, the gate binds, and the operator fights it until something breaks. We prevent it by augering post holes to at least 48 inches, below the frost line, and by using a wider footing base so upward pressure has less to grip. On a new slide gate install in Woburn, we also compact the sub-base with gravel so water drains away from the footing. That’s the difference between a gate that runs true for fifteen years and one that needs a pry bar every March.
We stage the work. On a Commerce Way property we installed a LiftMaster slide gate with rack and pinion drive and loop detectors, working in tight quarters between a loading dock and a retaining wall where a swing gate would have hit parked trucks. We poured the footings below frost in the clay till, built the gate off to the side, and kept one lane open the whole time so the trucks kept moving. That’s the standard. We don’t shut down a commercial gate install unless the property manager explicitly approves a brief window. For most Woburn loading-dock gates, installs happen during normal business flow, not against it. Call (877) 610-2993 and Hal will walk the site and mark out a plan.
Yes, and that’s exactly the situation where a slide gate pays for itself. Eighteen inches of side clearance is enough for a slide gate track if the gate travels parallel to the house or fence line rather than swinging an arc over your one usable lane. We’d install a cantilever-style or wheeled slide with an operator mounted on a post inside your property line. The existing swing gate posts usually come out, and we locate the new footings to match the gate weight and travel. This is a conversion we do regularly in Woburn, often because an older swing gate stopped working, or because someone’s headlights now sweep across a neighbor’s front window every time the gate opens. Call (877) 610-2993 for a free measure and a written price.
Current UL 325 and ASTM F2200 standards apply to automatic gates in Woburn, and yes, inspectors here do look. You need monitored entrapment protection on both the open and close directions: photocells, edge sensors, or a combination, depending on the gate type and travel. A slide gate needs a safety edge or photoelectric beam. A swing gate needs them on both the pull and push sides of the arc. We install UL-rated edges and test them in front of you before labeling the job done. Skipping this isn’t a shortcut, it’s a liability. Call (877) 610-2993 and we’ll walk you through what your specific gate needs to pass inspection the first time.
Contact Gatewood Fence & Gate for Your Woburn Gate Installation
Hal answers the phone with a live person around the clock. Not a chatbot, not a call queue. You tell him what’s going on with your Woburn property, he tells you whether it’s a repair or a replacement, and what it’ll cost. The name is on the shop, the license is published, and the 90-Day Done Right Promise is in writing on every job. Call (877) 610-2993 for a free estimate in Woburn, and mention your ZIP code if it’s outside 01801 so we can route the closest crew.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Woburn since 2001.