Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Woburn
Gate repair in Woburn usually means one of two things: a residential driveway gate that won’t swing or slide, or a commercial gate at a facility along Route 128 that has to open right now because trucks are waiting. Gatewood Fence & Gate handles both. Hal Gatewood has been fixing gates since 2001, and we weld on site, stock parts for the brands Woburn businesses actually run, and answer the phone with a live person 24 hours a day. Call (877) 610-2993 and you’ll get a straight answer, a firm price, and a time we’ll be there.
Why Gatewood Fence & Gate Is Woburn’s Preferred Gate Repair Company
We’re not a franchise and we don’t run a call center. Hal Gatewood’s name is on the shop, his address is published, and his license number is there for anyone to look up. That matters in Woburn, where a lot of gate work sits on commercial properties with real deadlines. Facility managers in the New England Executive Park and Commerce Way corridors call us because they know we keep our word on response time and we don’t pad an invoice after the gate is open.
We’ve built our reputation in Woburn the slow way, one stuck slide gate and one sagging hinge post at a time. The same person who quotes the job is the person who shows up to fix it. Hal’s crew is background-checked and uniformed, and every job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings him back. No runaround.
Our Woburn customers span both sides of the city: homeowners in the post-war colonials near Horn Pond and the west side, and operations managers along Route 128 and Commerce Way. We carry parts for the operators those facilities depend on, which means we’re usually fixing a gate same-day rather than ordering a board and telling you to wait a week.
Woburn’s freeze-thaw cycle is brutal on gate post footings. When the ground heaves, gates go out of plumb, and you can’t fix that with a wrench. You have to reset the post. We do that in Woburn driveways and loading docks all spring. That’s the kind of local knowledge you only get from doing the work here, not from reading a manual.
Our Gate Repair Services in Woburn
Automatic Gate Repair
Woburn’s commercial corridor runs on automated slide and swing gates, and when one fails, it’s rarely just one component. We see sheared rack and pinion sections on FAAC slide gates, stripped drive gears on LiftMaster operators, and control boards that died after one too many power surges near the Route 128 corridor. We troubleshoot the whole system, not just the part that made the noise. Same-day service is standard for commercial calls in Woburn because we know a stuck gate blocks docks and parking structures.
Electric Gate Repair
Electric gate systems in Woburn face two local enemies: road salt corrosion and outdated control boards. Salt spray from Routes 128, 38, and 3 works its way into operator housings, hinge pins, and wire connections on properties close to treated roadways. We trace the wiring, test the loops and photocells, and replace only what’s actually failed. If a 1990s control board has no modern entrapment protection, we’ll tell you straight whether retrofitting makes sense or whether replacement is the cheaper long-term answer.
Hinge & Post Repair
In Woburn’s clay-heavy glacial till, freeze-thaw cycles heave post footings every year. A gate that sags in the middle almost always means the hinge post has moved, not that the gate panel failed. We reset posts in properly set concrete, replace corroded hinges, and weld reinforcement plates on site so the gate stays in your driveway instead of getting hauled to some shop. Fixing the panel without addressing the post is how you end up fixing the same gate twice.
Gate Realignment
When a Woburn swing gate starts dragging or won’t latch, it’s usually the post that moved, not the gate that bent. Realignment means resetting the post to plumb, adjusting the hinge alignment, and getting the drop rod to seat correctly in its keeper. For slide gates, it means checking the track, the guide rollers, and the rack alignment. We weld on site, which means we can make adjustments that a parts-swapper can’t.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Woburn
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Woburn, LiftMaster and FAAC dominate the commercial properties along Route 128 and Commerce Way. We keep common boards, gears, and safety components stocked for those brands so we’re not stuck waiting on a distributor when a Woburn facility has a gate down. If you run a Gatewood Fence & Gate repair, we’ll know the operator before we arrive and bring what’s likely to fix it.
Common Gate Repair Problems We See in Woburn Homes
- Post footing heave from freeze-thaw cycles. Woburn gets 30-plus freeze-thaw cycles a year, and the clay-rich glacial till under the city expands and contracts enough to push gate posts out of plumb. Every spring we reset posts that moved over the winter.
- Road salt corrosion on hinges and operator housings. Properties close to Routes 128, 38, and 3 see accelerated rust on everything metal. Hinge pins seize, operator housings rot through, and wire connections corrode until the gate stops responding.
- Obsolete control boards with no entrapment protection. Woburn has a lot of automated gates installed in the 1990s and 2000s, especially in the newer subdivisions near the Aberjona River corridor. Those boards are now failing, and many don’t meet modern safety standards. We’ll walk you through retrofit versus replacement costs.
- Drop rods missing their keepers. When a post heaves, the drop rod on a swing gate misses its keeper and the gate binds on the latch side. It’s a common Woburn issue on 1950s-1970s chain-link and early ornamental iron gates with deferred maintenance.
Pricing for Gate Repair in Woburn, MA
Here’s what gate repair actually costs in Woburn. A typical hinge and latch repair on a residential swing gate runs $180-$320. Post resetting with re-concrete work lands between $350 and $700 depending on access and whether we’re working against a foundation or a retaining wall. Automatic gate repair, including troubleshooting and a replacement control board, typically runs $280-$650. Full operator replacements on commercial slide gates along Route 128 can reach $1,200-$3,000 depending on the gate’s length and horsepower requirements. You’ll get a written price before any work starts, and the price we quote is the price you pay. Standing offers include $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Woburn
Along with our Gate Repair work throughout the Route 128 corridor, we regularly serve customers in Winchester, Stoneham, Burlington, and Reading. If your gate is in one of those communities, Gate Repair in Woburn is a good reference for how we work, but give us a call and we’ll come to you.
Serving Woburn, MA - Our Local Coverage Area
We’re based in the Woburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Woburn
Woburn sits on clay-heavy glacial till that holds water, and when that water freezes and thaws 30-plus times each winter, it expands and contracts with enough force to push gate post footings out of the ground. Posts that were set shallow or without proper drainage move the most. In spring, gates that were fine in September are suddenly binding or dragging because the post it swings on has shifted. We reset posts in deeper footings with proper drainage to break that cycle. Call (877) 610-2993 and we’ll evaluate your Woburn gate’s footing before the next freeze cycle does more damage.
It might be, but more often we find the rack and pinion has sheared or the post footing has heaved enough to throw the track out of alignment. On Woburn’s commercial properties, we also see loop detectors buried in mud or knocked out of calibration when the ground shifts. We test the full system before condemning an operator. At one Commerce Way facility, our tech found a FAAC slide gate that had sheared its rack and pinion after a late-winter freeze-thaw heaved the post, leaving the loop detector buried and the operator stalled mid-cycle. We reset the post, replaced the rack section, recalibrated the safety photocells, and had the loading dock open before the morning shift. No replacement needed. Call (877) 610-2993 and we’ll tell you what’s actually wrong before anyone quotes you a new operator.
Sometimes. If the operator itself is sound, we can often add modern safety photocells and an edge sensor to bring it closer to current standards. But if the control board is the original from the 1990s or early 2000s, the board may not support the newer safety inputs. In that case, replacing the board and sensors together usually costs less than fighting an obsolete system. Woburn has a lot of these older LiftMaster units in the residential neighborhoods around the city, and we’re straight with you about which path makes sense. Call (877) 610-2993 for a free assessment.
It depends on the post. If the hinge post is still solid in the ground and the rust is confined to the hinge hardware and gate frame, we can weld new hinges on site, reinforce the frame, and get that gate swinging true again for a few hundred dollars. If the post itself has rotted through from years of road salt off Route 38, the honest answer is usually to replace the post and set it properly. We’ll weld on site so the gate stays in your Woburn driveway either way. Call (877) 610-2993 and we’ll give you a straight answer on whether repair or replacement costs less over time.
We prioritize commercial calls in Woburn because a stuck gate on Commerce Way or in the New England Executive Park blocks loading docks and parking structures. We aim for same-day response on commercial slide and swing gate failures along the Route 128 corridor, and because we stock common LiftMaster and FAAC parts, we usually repair rather than patch. Call (877) 610-2993 the moment a gate goes down and a live person will answer, day or night.
Call Gatewood Fence & Gate for Gate Repair in Woburn
If your Woburn gate is sagging, stuck, or stalled mid-cycle, call (877) 610-2993. A live person answers 24 hours a day, seven days a week. We’ll give you a straight answer, a written price before any work starts, and a time we’ll be there. The name is on the shop, and that’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Woburn and the Route 128 corridor since 2001.