Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Wilton Manors
Gate installation in Wilton Manors runs $1,900-$7,500 for most residential jobs, with sliding gates on the lower end of that range and ornamental swing gates with automation at the higher end. We are Hal Gatewood’s crew, and we have been installing and repairing gates in South Florida since 2001. Wilton Manors is a city we know well: short driveways, canal-front lots, 1950s concrete block homes, and gate hardware that fights salt air every single day. If you need a new driveway gate, a pedestrian gate, or a full automated system, call (877) 610-2993 and we will come measure, quote a firm price, and get it right.
Why Gatewood Fence & Gate Is Wilton Manors’s Preferred Gate Installation Company
Wilton Manors is only 0.7 square miles, but it packs more ornamental iron and automated gates per block than almost any city in Broward. That density means we are here often, and the homes are not interchangeable to us. We know that a gate on NE 21st Court near the Middle River behaves differently than one three blocks west on a dry lot. We know the older CBS ranch homes have concrete posts that were not built for today’s automated hardware. We know the canal air eats rollers. That local knowledge is why homeowners here keep our number.
Hal Gatewood’s name is on the shop and on every invoice. The person who answers your call is a live person, 24/7, not a voicemail or a call center three states away. We show up in uniform, background-checked, and we quote the price before any work starts. The price we quote is the price you pay, and every job carries our 90-Day Done Right Promise in writing. If it is not done right, one call brings Hal back. No runaround. That is the whole deal.
Our Gate Installation Services in Wilton Manors
Every installation starts with the driveway, the post condition, and how the gate will be used. We do not sell a gate that does not fit your lot or your life. Here is what we install most often in Wilton Manors.
Sliding Gate Installation
For most Wilton Manors homes, a sliding gate is the smartest choice. The lots are short and the driveways are tight, so a swing gate that arcs outward will hit the street, the neighbor’s hedge, or the car. A slide gate runs parallel to the fence line on a track, and it handles the local conditions better than anything else when installed correctly. We set the track on a fresh concrete footing sized for the soil, use stainless or coated rollers, and align the rack so it does not bind after the first rain.
Swing Gate Installation
A swing gate works on Wilton Manors properties with a wider setback or a driveway that runs along the side of the house. The critical piece is the hinge post. A solid infill swing gate acts like a sail in hurricane season winds, and a post set shallow in saturated canal-adjacent ground will lean and drop the gate until it scrapes the driveway. We set hinge posts deep, with proper concrete and a steel core, and we check the post before we ever hang the panel. Fix the panel without the post and you will fix it twice.
Pedestrian Gate Installation
Many Wilton Manors homes have a separate walk gate next to the driveway, and these get heavy daily use and near-constant exposure to canal air if the property is on or near the water. We install aluminum and steel pedestrian gates with self-closing hinges, quality latches, and frames matched to your existing fence. For older concrete block columns, we anchor properly or rebuild the column cap rather than bolting into spalled, crumbling block.
Security Gate Installation
Security gate installation in Wilton Manors usually means a solid infill panel, an automated operator, a keypad or intercom, and often a camera integration. On the canal side of the city, we also pay close attention to the mounting surface. A gate operator bolted to a leaning column will grind itself apart. We do not install automation on a post we would not trust in a storm.
Trusted Brands We Service in Wilton Manors
We are certified to service nine major gate brands, and in Wilton Manors we work most often with LiftMaster, DoorKing, and Linear operators. We keep common parts for these systems on the truck, and for Wilton Manors specifically we carry stainless hardware and coated rollers because the canal air demands them. If your existing operator is from a different brand and works fine, we will not push you to replace it. If it is failing because of corrosion or misalignment, we will tell you honestly whether a repair makes sense or whether replacement is the cheaper long-term call. That is the repair-first approach Hal has run this business on since 2001.
Common Gate Installation Problems We See in Wilton Manors Homes
- Canal-driven corrosion on rollers and hinges. The Middle River and its tidal canals run through and around much of Wilton Manors, and the brackish moisture in the air accelerates oxidation on ferrous gate hardware. Our crew finds rollers and hinges on canal-front properties needing replacement at half the interval of similar gates a mile inland in Oakland Park.
- Wind load flexing solid swing gates. A solid infill panel catches hurricane-season wind like a wall, and the force transfers straight into the hinge post. We regularly find posts that have twisted in their footings and been shimmed or adjusted multiple times, when the real fix is pulling the post and setting a deeper, properly sized footing.
- Slide gates binding after rain. Salt scale and corrosion deposit on track rollers, and saturated ground from the Middle River’s tidal network lets posts shift. The gate then rides rough, jumps the track, or grinds the operator. We correct the footing, re-align the track, and switch to rollers that survive this environment.
- Automation on walls and columns that were never built for it. The 1950s and 60s CBS homes in Wilton Manors often have decorative columns at the driveway angle. They were built as architectural features, not structural mounts. We regularly rebuild or reinforce these before welding on an operator bracket, because an operator bolted to a hollow, spalling column will fail within a season.
Pricing for Gate Installation in Wilton Manors, FL
A basic single sliding driveway gate in Wilton Manors, manual, with aluminum frame and infill, typically runs $1,900-$3,200 installed. An automated sliding gate with a LiftMaster or DoorKing operator, keypad, and safety edges usually lands between $3,500 and $5,800. A custom ornamental swing gate with automation and new structural posts trends $4,500-$7,500, depending on width, infill style, and whether the existing columns can be reused. Pedestrian gates run $600-$1,800 installed, with decorative aluminum at the upper end. On canal-adjacent lots we recommend stainless hardware and coated rollers, which adds a modest line item but doubles the hardware life. Every quote is written, firm, and agreed before we start. Call (877) 610-2993 and we will come measure, at no charge, and hand you a price you can hold us to.
We Also Serve Cities Near Wilton Manors
If you are just outside the city line, we install gates in Sunrise, North Andrews Gardens, Oakland Park, and Lauderdale-by-the-Sea as well. You can read more about our work across the area on our Wilton Manors page, or call us directly and we will tell you whether we cover your street. Chances are the answer is yes.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Wilton Manors
The brackish, salt-laden air from the Middle River and its tidal canals corrodes hinges, springs, motor housings, and especially bottom rollers on slide gates at roughly twice the rate of inland Broward cities like Margate or Coral Springs. That means a gate that would need roller replacement at five years in a dry location might need it at two to three years on a canal-front Wilton Manors lot. The fix is material selection at installation: stainless hardware, coated rollers, marine-grade fasteners, and sealed or shielded operator boards. We also recommend a maintenance visit every 12 months on canal-adjacent properties. A small cleaning and lube schedule prevents a full roller-and-track replacement later. Call (877) 610-2993 and we will walk your property and tell you what your gate is up against.
Usually not, and that is okay. A swing gate needs enough depth for the panel to arc open without hitting the street, the parked car, or the house. Most 1950s CBS ranches in Wilton Manors have driveway depths of 18 to 25 feet from the sidewalk to the front wall, and a swing gate eats up most of that. The better solution on these lots is a sliding gate that runs along the fence line, or a bantam-width swing gate on the pedestrian opening if you only need a walk-in. We will not install a swing gate that will hit your car every time you open it. Call for a free measure and we will show you what fits.
Every automated gate we install includes a manual release, typically a keyed or knob release on the operator itself. When power goes out, you pull the release and the gate moves by hand. For Wilton Manors specifically, we also recommend a battery backup on the operator if you have a solid infill gate and expect to need access during an outage. These systems hold enough charge to cycle the gate several times after the grid drops. The release itself needs to stay clean and operable, which is another reason we recommend annual service on canal-front properties where salt deposits can seize the release mechanism. To be clear: releasing the gate manually is simple, but the gate is heavy, and if the release has not been exercised in years, do not force it. Call us and we will free it up safely.
In Wilton Manors, the most common cause is saturated ground under the track allowing the post or the track bed to settle or shift, combined with corroded rollers that have lost their smooth rolling surface. The gate then rides high on the rack, the rollers skip, and the gate lunges. The fix is not just re-seating the gate. We dig out the affected footing, re-set the post in new concrete with proper drainage, re-align the track, and replace the rollers with coated or stainless units that can take the canal air. Patching this without addressing the footing is a temporary repair. Call (877) 610-2993 and we will diagnose it properly.
Yes. Florida and federal safety standards require entrapment protection on automated gates: either monitored safety edges, photo eyes, or both, depending on the gate type and configuration. We install these on every automated gate we put in, including slide gates with safety edges that stop and reverse the gate on contact and photo eyes that detect a vehicle or person in the path. This is not an upsell. It is a legal requirement and the right way to build a gate, especially on short driveways where kids, dogs, and delivery drivers are all in the same small space. We will spec the right protection for your gate and explain exactly how it works before we install anything.
Call Gatewood Fence & Gate for Your Wilton Manors Gate Installation
You live in a city where the canal air works on your gate every single day, the wind loads test the posts every season, and the lot sizes do not forgive a bad layout. We know this because we work here all the time. Hal Gatewood has been running this shop since 2001, and the way we do business has not changed: a live person answers, the price is quoted up front, the work is done by people whose names are attached to it, and the 90-Day Done Right Promise is in writing on every job. Call (877) 610-2993 for a free estimate on gate installation in Wilton Manors. We will come out, look at your driveway and your posts, and tell you what will actually work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Wilton Manors since 2001.