Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Wilton Manors
Gate repair in Wilton Manors usually costs between $180 and $1,400 depending on whether we’re welding a hinge, replacing a board, or rebuilding a post footing. Most hinge, roller, and realignment jobs here run $180 to $450, while operator and control-board replacements land between $600 and $1,400. We answer the phone around the clock and typically get to Wilton Manors properties the same day you call, often within two hours. Hal Gatewood has been fixing gates since 2001, and the name is on the shop, not a franchise brochure. Call (877) 610-2993 and a live person picks up.
Wilton Manors is not like the rest of Broward County. This city sits on barely 0.7 square miles, wrapped around the Middle River and its tidal canals, and it holds an outsized share of ornamental iron entry gates and automated systems on 1950s and 1960s concrete block homes. That means we see failure patterns here that a shop in Sunrise or Margate never deals with. Salty air off the canals attacks steel hinges and motor housings year-round. We know which streets back onto brackish water, because we drive them every week. Whether you’re off NE 20th Street, near Hagen Park, or down by the river on NE 6th Avenue, the Gate Repair crew knows what your gate is up against.
Why Gatewood Fence & Gate Is Wilton Manors’s Preferred Gate Repair Company
We’re local in the way that matters. Hal Gatewood owns the company, his license number is published, and he has been at this since 2001, not as a salesperson but as the person under the gate with a welder. Wilton Manors homeowners tend to be house-proud and renovation-minded, which means when a gate starts sagging or an opener stops mid-cycle, they want it diagnosed honestly, not replaced for the sake of a bigger invoice. That’s how we work. A gate sags in the hinge post, not in the middle, and that is where we start.
Our Wilton Manors customers keep our phone ringing for a reason: a live person answers every call, 24 hours a day, seven days a week. Not a voicemail maze. Not a call center in another state. You get a straight answer, a real appointment window, and background-checked, uniformed people who show up when they said they would. If you’d rather look someone in the eye before they work on your property, you can drive to the shop and do that. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Every job in Wilton Manors carries the 90-Day Done Right Promise, stamped in writing. If the gate isn’t right, one call brings Hal back. No fine print. We also stock common parts for the operators we see most in this city, so most repairs don’t wait on a parts truck. For a town this size, that matters. You don’t want your driveway blocked for a week because a control board is on backorder from a distributor with no local presence.
Our Gate Repair Services in Wilton Manors
Electric Gate Repair
A dead gate operator in Wilton Manors is usually one of three things: a failing control board, a burned capacitor, or corroded wiring at the motor housing. On canal-front properties, we also see salt creep inside the operator cabinet, which invites exactly the kind of intermittent failure that drives homeowners crazy. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If the board is obsolete and can’t be sourced, we’ll tell you that plainly and price a retrofit rather than patching a 1990s operator until it fails again.
Automatic Gate Repair
Automatic gate systems around Wilton Manors do extra work, because most lots here are shallow and driveways are tight. That means gates cycle more frequently than on a half-acre lot in Sunrise. More cycles, more wear, faster failures. We rebuild rack and pinion assemblies on slide gates, replace limit switches, realign safety photocells, and sort out radios and keypads that have lost their programming. If an opener is stall-tripping, we find out why before we sell you a motor. Show me the gate closing on its own and I’ll show you where it’s failing.
Hinge & Post Repair
This is the service we lean into harder in Wilton Manors than almost anywhere else in Broward. Brackish air off the Middle River chews through steel hinge posts at roughly twice the rate we see inland. A sagging gate that scrapes the driveway is not a cosmetic problem. It’s the post failing, and if you fix only the panel without the post, you’ll fix it twice. We cut out corroded post footings, set new galvanized posts, and weld or bolt hinges back to true. On older concrete block homes, we often find original posts that were never engineered for the weight of an ornamental iron gate, much less an automatic opener bolted to it.
Gate Realignment
Slide gates in Wilton Manors run on tracks that collect sand, salt, and leaf litter. Over time, rollers wear flat, the track walks, and the rack and pinion starts skipping teeth. We dial tracks back to level, replace rollers, and adjust the operator so it stops fighting the gate. On swing gates, realignment means correcting hinge sag and rehanging the gate so it clears the driveway with even margins on both sides. Tight lots here don’t forgive a gate that swings wide or drags on poured concrete.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wilton Manors
We’re certified to service nine major gate brands, including Linear, Viking, Ghost Controls, and DoorKing operators that are common across Wilton Manors. Because we work these systems every week, we keep a running stock of the boards, sensors, and hardware that fail most on this side of Broward. If you have a Viking slide operator on a canal-front property, we understand how salt air hits its particular motor housing, and we stock what it takes to get it moving again. We don’t sell you a new operator because the old one is dirty. We diagnose, then fix what’s actually broken.
Common Gate Repair Problems We See in Wilton Manors Homes
- Canal-corrosion hinge failures: Salt-laden air from the Middle River accelerates oxidation of steel hinges, rollers, and motor housings. Gates a block off the water rust at half the service interval of similar gates inland, so hinge replacement here is a maintenance item, not a surprise.
- Legacy operators without modern entrapment protection: Many Wilton Manors homes still run gate openers installed in the 1980s and 1990s on original concrete block construction. These older boards often lack the entrapment safeguards now required under UL 325, which means upgrading isn’t a luxury, it’s a liability gap on your property.
- Wind-loaded sag on older ornamental gates: Hurricane-season wind loads, repeated year after year, stress anchor points and crack post footings on gates that were never reinforced. We see swing gates that have slowly drifted out of plane until the latch no longer lines up and the gate scrapes the driveway.
- Track contamination on slide gates: In Wilton Manors, slide gate tracks collect brackish runoff, fine sand, and lawn debris in a way open yard gates don’t. Skipping teeth, jerky travel, and photosensor faults usually trace back to a dirty or corroded track and worn rollers.
Pricing for Gate Repair in Wilton Manors, FL
Here’s what gate repair actually costs in Wilton Manors, based on the jobs we do most often. Hinge and post repair typically runs $180 to $450 depending on whether we’re welding a hinge or setting a new post. Gate realignment lands between $150 and $350. Weld and rust repair, including cutting out corroded sections, runs $200 to $600. Electric gate repair, including control boards and operators, spans $350 to $1,400. The price we quote is the price you pay, and it’s confirmed in writing before any work starts. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
| Service Type | Typical Range in Wilton Manors |
|---|---|
| Hinge & Post Repair | $180 - $450 |
| Gate Realignment | $150 - $350 |
| Weld & Rust Repair | $200 - $600 |
| Electric Gate / Operator Repair | $350 - $1,400 |
A quick note for anyone comparing quotes in Wilton Manors: the canal-front premium is real, but it’s not a markup. If a national company prices your repair without asking whether your property backs onto the Middle River or one of its tidal tributaries, they’re guessing. We ask. And we price the job for the conditions your gate actually lives in.
We Also Serve Cities Near Wilton Manors
Our crews cover Wilton Manors and the surrounding communities, including Sunrise, North Andrews Gardens, Oakland Park, and Lauderdale-by-the-Sea. If you’re reading this from one of those areas, the same live-answer phone, the same 90-Day Done Right Promise, and the same owner-operated accountability apply. For more about our full Wilton Manors coverage or nearby service areas, give us a call.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Wilton Manors
Brackish water vapor from the Middle River keeps steel hinges, rollers, and motor housings in near-continuous contact with salt-laden air. That means your hardware is corroding around the clock, even on dry days. We routinely find that canal-front gates in Wilton Manors need lubrication and hardware replacement at half the interval of identical gates a mile north in Oakland Park, where there’s no tidal water. If your gate is close to the water, plan on hinge and roller service every 12 to 18 months instead of every 3 to 4 years. Call (877) 610-2993 and we’ll take a look.
Usually, yes, but the gate structure and the posts have to be able to carry the load. UL 325 requires modern entrapment protection, which means monitored photocells, force sensing, and often a new control board. On older concrete block homes in Wilton Manors, the bigger issue is often the original hinge post, which was never engineered for an automated gate’s weight. We’ll inspect the post, the hinges, and the gate’s alignment before we recommend a retrofit, and we’ll be honest if reinforcing the post costs less than you’d expect - or if replacing the gate is the cheaper long-term answer. Call us for a written estimate first.
Almost always, it’s track contamination. Heavy rain pushes sand, leaf litter, and brackish runoff into the track. The gate rolls slightly out of plane, the rack lifts off the pinion, and you hear that telltale grinding-skip sound. Our crew recently replaced a rust-seized bottom roller and realigned a sliding gate on NE 20th Street off the Middle River, where tidal moisture had pitted the track so badly the rack and pinion was skipping teeth on a LiftMaster slide gate operator. We cut out the corroded post footing, set a new galvanized post, and fitted stainless rollers so the operator no longer stall-trips the safety photocell. If your gate skips after rain, get it looked at before you burn out an operator motor.
Not always. If the gate itself is structurally sound, the fix is often a new post, not a new gate. We cut the old one out, set a galvanized post in fresh concrete, and rehang the gate with new hinges. That typically costs $200 to $450, far less than replacing an ornamental iron gate that would run into the thousands. We’ll tell you honestly if the gate is too far gone, but we’d rather fix the post than sell you a gate you don’t need. Fix the panel without the post and you’ll fix it twice.
Look for photocells mounted near the bottom of the gate opening on both sides. If they’re there, that’s a start, but the control board also needs to support monitored entrapment protection, not just interrupt the gate. Older boards from the 1980s and 1990s often lack this entirely. The simplest way to know is to have us inspect the board and the sensors. We can tell you in one visit whether your system meets UL 325 or whether a board upgrade or photocell replacement is needed. Call (877) 610-2993 and we’ll take a look.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Hal has been repairing and welding gates in South Florida since 2001, and his name is on every invoice.