Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Whitman
Gate installation in Whitman runs anywhere from $850 for a basic pedestrian gate up to $7,500 or more for a full automated driveway system, depending on the gate style, operator, and how much of the old hardware has to go. Most jobs in Whitman are completed within one to three days once materials are on hand, and we handle everything from the first hinge to the final safety sensor. This is not a call-center operation. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and the person who answers the phone at (877) 610-2993 is a live human being, any hour of the day or night.
If you live in Whitman, you already know the problem with gate work around here. The town is full of old mill-era homes with side-yard gates that were set decades ago, before anyone worried about the 48-inch frost line. Every March, those posts heave and tilt toward the street. That is the call we get most often from Whitman homeowners, and it is not a mystery to us. It is a pattern we see on Washington Street, on Temple Street, on South Avenue, and on just about every side street in the 02382 ZIP code. We know this town’s gates the way a mechanic knows the same model of car that keeps rolling into his bay.
Why Gatewood Fence & Gate Is Whitman’s Preferred Gate Installation Company
We are not a franchise. We are not a national outfit that quotes one number on the phone and hands you a different invoice at the door. Hal Gatewood’s name is on the shop, the shop address is published, and his license number is there for anyone to look up. That is the kind of accountability that matters to people in Whitman who have already been burned once by a company that forgot their name after the check cleared.
Our reputation in Whitman is built on showing up when we say we will and fixing the gate in your driveway, not hauling it off to some warehouse. We weld on site. If your gate has a cracked hinge or a sagging post, we repair it right there, with the gate still hanging where it belongs. We do not swap out parts that still have years of life in them, and we do not sell you a full replacement when a repair is the smarter call. The 90-Day Done Right Promise is stamped in writing on every single job. If something is not right, one call brings us back. No fine print, no runaround.
Homeowners around Whitman regularly see us on their block. We have rebuilt gates on the mill-era cottages near the center of town, replaced operators on the mid-century capes off Franklin Street, and hung new driveway gates on the bigger lots closer to the Abington line. When you call, you are not getting a dispatcher three states over. You are getting a person who knows that Whitman’s streets salt the heck out of gate hardware every winter and that your post probably heaved because it was set above frost depth 60 years ago.
Our Gate Installation Services in Whitman
We install and repair every kind of gate you will find on a Whitman property. Wood, ornamental iron, chain-link, aluminum, vinyl, and steel. Here is what we handle most often in town:
Driveway Gate
A driveway gate in Whitman has to survive two things: Plymouth County’s freeze-thaw cycles and the road salt that gets kicked up by every plow that passes. We set posts to 52 inches minimum, which is below the 48-inch frost line, because we learned years ago that anything shallower is a callback by April. Driveway gates here are usually swing or sliding, and we will help you decide which makes sense for your lot before we order a single part.
Pedestrian Gate
Side-yard and rear pedestrian gates are the workhorses of Whitman’s tight Victorian lots. These are the gates that get opened ten times a day, every day, in every season. When we install a pedestrian gate in Whitman, we pay special attention to the hinge post, because that is the part that fails first on older properties. A gate sags in the hinge post, not in the middle, and that is where we start.
Sliding Gate
Sliding gates are a good fit for Whitman driveways that are short on swing clearance or that slope toward the street. We install cantilever and track-style sliding gates, and we service the rollers, tracks, and motors on existing ones. On a sliding gate, the track has to stay clear of snow and ice, and we will show you exactly how to keep yours moving through a Whitman winter.
Swing Gate
Swing gates remain the most common style in Whitman, especially on the older side yards. The hard truth about a swing gate is that both posts have to be set deep enough to stay put when the ground freezes and thaws. We regularly replace original posts on 19th-century Whitman properties that were set at 30 or 36 inches. That is why they lean toward the street by March. A new post at 52 inches fixes it for good.
We also install double gates for wider driveway openings and security gates with steel frames and heavier hardware. Every job starts with a free measure and a written price you approve before we begin. No trip charge inside Plymouth County.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Whitman
We are certified to install and service gate operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Whitman homeowners, that means you are not locked into whatever brand a national installer happens to carry on the truck. We service all nine major brands and we stock common parts locally, so a replacement board or a new set of photo-eyes does not have to ship from across the country. If you have a Viking operator on an old driveway gate or a Ghost Controls kit on a side gate, we can keep it running or upgrade it without starting from scratch. Our Gate Installation team works with every one of these brands regularly.
Common Gate Installation Problems We See in Whitman Homes
- Shallow hinge posts heaving every spring. Original posts on Whitman’s mill-era properties were often set at 30 to 36 inches, well above the 48-inch frost line. Each freeze-thaw cycle pushes them a little higher, which twists the frame and snaps operator arm brackets.
- Legacy control boards without entrapment protection. Gate operators installed before UL 325 came into effect often lack modern photo-eyes and edge sensors. These units are non-compliant and should be retrofitted or replaced before they hurt someone.
- Sagging side gates binding at the top corner. On tight Victorian lots, a gate that drags at the top latch corner is almost always a hinge post that has racked underground. Fix the panel without the post and you will fix it twice.
- Road salt corrosion on metal frames and hinges. Whitman’s interior streets get heavy salt through the winter, and it eats metal hardware. We see hinge pins that snap in February and frames that have rusted clean through by the time anyone notices.
Pricing for Gate Installation in Whitman, MA
Gate installation in Whitman is priced per job, not per hour, and you approve the number before we start. Here is the honest breakdown for typical Whitman projects:
| Gate Type | Typical Range in Whitman |
|---|---|
| Basic pedestrian gate (wood or chain-link, no operator) | $850 – $1,800 |
| Ornamental iron single swing gate | $1,900 – $4,200 |
| Sliding gate (manual) | $2,500 – $5,000 |
| Automated driveway swing gate with operator | $4,000 – $7,500 |
| Full double gate with automation and safety sensors | $6,000 – $12,000 |
What moves the price is whether we are replacing posts, how much of the old hardware can be salvaged, and whether the gate needs automation. You get a written quote before any work begins, and we stand by that number. We also offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Whitman
If you are in Abington, East Bridgewater, Rockland, or Brockton, you are still in our service area. The same pricing, the same 90-Day Done Right Promise, and the same live person on the phone apply. For reliable Gate Installation in Whitman or any of the surrounding South Shore towns, call us directly.
Serving Whitman, MA - Our Local Coverage Area
We’re based in the Whitman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Whitman
A gate post in Whitman needs to be set at least 52 inches deep, which gets the footing below Plymouth County’s 48-inch frost line. Anything shallower will heave during the freeze-thaw cycles that run from January through March, and that heaving is exactly why so many older gates in this town lean toward the street every spring. Call (877) 610-2993 if you suspect your posts were set too shallow; we will confirm it on site and quote a proper reset.
Some pre-UL 325 operators can accept retrofit photo-eyes and edge sensors, but many older boards simply do not have the terminals to support modern entrapment protection. On a Whitman property, we will open the control box and check the board before recommending anything. If the unit is a quality brand like DoorKing or Elite and still in decent shape, a retrofit is often possible; if the board is obsolete or the motor is on its way out, replacement is usually cheaper than nursing a 30-year-old unit along.
Because the hinge post was not set below frost depth, or because the last contractor fixed the panel without touching the post. A gate sags in the hinge post, not in the middle. On Whitman’s older mill-era lots, the original posts were commonly set at 30 to 36 inches, and every freeze-thaw cycle pushes them up and over. The only lasting fix is to excavate the post, pour a new footing at 52 inches, and re-hang the gate on solid hardware. We do that work on site, and the 90-Day Done Right Promise covers it in writing.
Yes. Any automatic gate operator installed today is required to have entrapment protection, which means photo-eyes, edge sensors, or both, depending on the gate type and its travel path. Many older Whitman gates were installed before these requirements existed and lack any safety devices at all. Show me the gate closing on its own and I’ll show you where it’s failing. We retrofit or replace non-compliant operators as part of any installation.
Road salt accelerates corrosion on metal gate frames, hinges, and operator arms, especially on homes that sit close to the street. For new gate installations in Whitman, we use galvanized or powder-coated hardware where possible and recommend annual lubrication and inspection. A gate installed with bare steel hardware on a salted street will look rough within three winters. Call (877) 610-2993 to discuss salt-resistant options for your property; estimates are free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Whitman and the South Shore since 2001.