Gate Repair in Whitman - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Whitman

A gate that won’t close in Whitman isn’t just an inconvenience. It’s a broken latch at midnight, a dog that slipped out toward South Avenue, a delivery driver who left the side gate swinging. Most Whitman gate repairs run between $140 and $420, and we can usually have someone at your house the same day you call. Hal Gatewood has been fixing gates since 2001, and when you call (877) 610-2993, a live person answers. Not a voicemail, not a call center. A person who knows Whitman.

Call (877) 610-2993

If you live near Whitman Center, up by the old Regal Shoe factory blocks, or on a side street off Route 27, you know the lots are tight. Gates here do a lot of work. They keep the dog in, the snow from drifting across the walk, and the neighbor’s kids from cutting through. When one stops working, you notice fast.

Why Gatewood Fence & Gate Is Whitman’s Preferred Gate Repair Company

Whitman homeowners tend to ask the same thing when they call: will you actually show up? We will. The person who answers the phone at (877) 610-2993 is the same person you’ll see in your driveway. Hal Gatewood owns the shop, his name is on the invoice, and he has been at this since 2001. There’s no dispatch queue and no national call center routing your call to another state.

Half the work we do in Whitman starts with a gate someone else already “fixed.” A hinge that was greased instead of rebuilt. A post that was shimmed instead of reset. A track that was bent back instead of cut out and welded straight. Hal will tell you what’s actually wrong, fix it on site, and stand behind it with the 90-Day Done Right Promise in writing. If it’s not right, one call brings him back.

Our Whitman customers come from word of mouth. A neighbor on Washington Street sees us welding in a driveway and asks for a card. A landlord with a two-family off Plymouth Street calls because the tenant’s gate won’t latch and the previous company quoted a full replacement. We repair first, replace only when the steel is truly gone. And every job starts with a price agreed before we touch a bolt. No trip charge inside Plymouth County, and $40 off any repair over $200.

Our Gate Repair Services in Whitman

Whitman’s housing stock runs old and tight. Victorian-era cottages, mill-era two-families, mid-century capes. Almost every lot uses a side or rear gate for yard access. That means hinges wear, posts heave, and latches fall out of alignment constantly. These are the calls we handle most in Whitman.

Electric Gate Repair

Electric gates in Whitman take a beating from freeze-thaw cycles and heavy road salt. Operators from Viking, Ghost Controls, and DoorKing sit in metal boxes out in the weather, and when corrosion creeps into the control board or the limit switches fail, the gate opens partway and reverses, or simply goes dead. We diagnose these on site. Often it’s a bad capacitor or a corroded photo-eye connection, not a full operator replacement. Fixing the actual fault, rather than swapping the whole unit, is what separates us from outfits that sell new openers for a living.

Automatic Gate Repair

Automatic gates in Whitman share a specific failure mode: on cold mornings, the gate opens halfway and reverses. That’s usually a limit switch or clutch adjustment drift, made worse by the operator working harder against a gate that frost heave has pushed slightly off track. We service the big brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate is automated and acts up when temperatures swing, call (877) 610-2993. We’ll trace the fault to the actual cause before quoting parts.

Hinge & Post Repair

This is the bread and butter of Whitman Gate Repair. Original posts on late-19th and early-20th century lots were set shallow, sometimes two feet or less. Massachusetts code now requires posts to sit below the 48-inch frost line. When a post doesn’t reach that depth, it heaves up and tilts toward the street every March. We hand-dig new footings, set posts in high-strength concrete below frost depth, and weld or replace hinge brackets so the gate hangs true for decades, not seasons.

Gate Realignment

A sagging gate is almost never a bent panel. The post leans, the hinge bushings wear oval, and the free corner drops until the latch drags on the walk. On a dense block of two-family homes off South Avenue, we replaced a rusted hinge post on a chain-link side gate where the post had heaved a full two inches above the walkway. Tight working space forced us to hand-dig a new post footing below the 48-inch frost line and brace the existing fence with a temporary picket while we set the new post. When we hung the original gate back on the new post, the sag was gone and the latch cleared without dragging. That’s the job: fix the post, re-hang the gate, walk away with it swinging like new.

Trusted Brands We Service in Whitman

We’re certified to service nine major gate brands, and for Whitman customers that matters because we stock local parts for the most common ones: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate controls run on a Viking operator or Ghost Controls arm, we likely have the board or limit switch on the truck, which means the repair happens in one visit instead of two. DoorKing and Elite commercial operators on shared driveways are also stock items for us. Fast turnaround keeps your driveway accessible.

Common Gate Repair Problems We See in Whitman Homes

• Post heave tilting gates toward the street every March. When original posts from the 1920s and 1930s sit above the 48-inch frost line, winter freezing pushes them up and out. The gate leans visibly toward the street, the latch misses the strike, and no amount of hinge tightening fixes it. The post has to be dug out and reset below frost depth.
• Shared driveway rights of way wearing hinges and latches fast. When two or three households use the same gate daily, hinge bushings wear oval within a few years. The gate starts to sag on the hinge side, and the latch develops a drag. Replacing bushings and realigning the gate is a faster, cheaper fix than a full gate swap.
• Sliding gates on narrow side yards jamming from frost-shifted track. Retrofit sliding gates sit on track bolted to the ground. When frost heaves one section of track a quarter inch, the gate binds mid-travel. Swing gates on neighboring lots don’t face this. We check the track for level, correct the footing issue where it exists, and replace bent rollers or bent track sections.
• Road salt corrosion on ornamental iron and chain-link hardware. Whitman’s interior streets get salted heavily in winter. Spray from passing cars settles on gate frames and hinge pins, and by spring the steel has bloomed. We cut out rusted sections, weld in new material on site, and re-hang the gate. Rust repair is almost always cheaper than replacement.

Pricing for Gate Repair in Whitman, MA

We Also Serve Cities Near Whitman

Our Whitman work often starts with a call from a neighbor in Abington or East Bridgewater who saw the truck. We handle Whitman and the nearby South Shore towns regularly: Abington, East Bridgewater, Rockland, and Brockton. If your gate is failing and you live in one of those towns, the same live-person phone, same 90-Day Done Right Promise, and same no-trip-charge policy apply.

FAQs - Gate Repair in Whitman