Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Westmont
Gate installation in Westmont runs $2,400 to $7,800 for a typical driveway gate, with automatic swing gates landing on the higher end because of LA County permit requirements and electrical work. We’re Gatewood Fence & Gate, and Hal Gatewood has been putting gates in and fixing other people’s mistakes since 2001. When your gate needs to last in Westmont’s salt air and hold up to ficus roots and 90-degree summers, the spec matters more than the sticker price. Call us at (877) 610-2993 for a free measure and a written quote.
Why Gatewood Fence & Gate Is Westmont’s Preferred Gate Installation Company
Westmont isn’t a city with a planning desk you can walk up to during lunch. It’s unincorporated LA County, which means your permit goes to the County Building and Safety office, not a local city hall. Many of the installers you might call from up the 110 or out of the Valley don’t know that, and the job stalls for three weeks while the paperwork gets sorted. We know it because we run permits for Westmont Gate Access Control jobs regularly. The process isn’t rocket science, but it’s a specific path, and it’s one we already know.
We serve Westmont locally from the brand’s Los Angeles office, which means when you call, someone answers. Not a recording, not a menu tree. Hal’s crew shows up in work trucks, not a rental van wrapped in ten colors of vinyl. We keep our published address and license number on every quote and every invoice because a person should be able to check who they’re hiring without filing a records request. If something’s not right after the job, the 90-Day Done Right Promise is in writing. One call brings us back.
Over the years, we’ve picked up a string of reviews from Westmont customers who’d already paid someone else to do the job wrong. The recurring theme is simple: we show up when we say we will, we quote a price before any work starts and stand by it, and we build a gate that doesn’t need a follow-up phone call three months later.
Our Gate Installation Services in Westmont
Swing Gate Installation in Westmont
Swing gates are everywhere in the 90047 ZIP. Many of Westmont’s homes were built in the 1940s and 1950s, and a lot of them got wrought iron swing gates added in the 1980s and 1990s as a security measure. Thirty to forty years later, those gates are tired. The biggest enemy of a Westmont swing gate is the marine layer. Overnight moisture rolls in from the Pacific, settles on bare steel and especially on the hinge post at ground level, and the base of that post rusts through years before the rest of the gate. We build swing gates with galvanized or stainless hardware where it matters, and we set posts in deeper concrete footings than most production installers bother with. It’s the difference between a gate that looks good for five summers and one that’s still square after fifteen.
Sliding Gate Installation for Westmont Lots
Sliding gates are popular on the side streets off Vermont and Western where the driveways are long and narrow. But the post-WWII concrete pads under those drives have had seventy years to settle and crack. Ficus trees are all over Westmont, and their surface roots run right under the sidewalk and driveway apron, lifting the slab that a slide gate’s track is anchored to. When we install a slide gate in the 90047 ZIP, we look at the concrete first. If it’s already creeping upward under the track line, we address the slab surface before we mount the track, or the gate will bind at the wheels within a year. It’s the most repeated cause of slide gate failure around here, and it’s a problem you can see before you buy the gate if someone bothered to check.
Driveway Gate Installation in Westmont
Most Westmont driveway gates are security decisions. This is a neighborhood where a solid gate on the driveway means something. We size every driveway gate to the vehicle that actually comes through it, not just the opening width. A gate that clears a sedan might not clear a contractor’s van or an SUV with a roof rack. For automatic driveway gate work, Gate Installation from our team includes the operator, safety photocells, and the controls, plus the power run and the permit that goes with the job. We’ll also talk straight with you about whether a swing or a slide makes sense for your lot. If you have a short driveway and a sidewalk right at the property line, a swing gate that opens inward may be the only legal option. We know what LA County will approve before we quote it.
Pedestrian Gate Installation in Westmont
A lot of Westmont homes have a walk gate next to the driveway, often in a wrought iron fence that was installed decades ago. If the new walk gate needs to match the existing fence pattern, we can match it. Hal welds on site for Gate Parts & Welding in Westmont, which means we can fabricate hardware and brackets the day we’re there instead of waiting on a factory order. A new pedestrian gate on a Westmont lot usually runs from $600 to $1,800 depending on width, material, and whether you want a keypad or automatic latch. We set the post deeper than the old one was set, for the same reason we do it on swing gates: the old one failed from the base up, and the marine air never stops.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westmont
We work on and install gates from the brands most common in Westmont: Linear, Viking, Ghost Controls, and DoorKing are all operators we service and stock parts for. We don’t have to tell you to wait on a shipment from a parts depot every time an opener board goes out. Westmont’s salt air shortens the life of operator boards and limit switches, so we keep the parts and sensors on the truck that tend to go first. When we install a new automatic gate, we’ll recommend the operator that matches your gate’s weight and duty cycle, not the one with the biggest marketing budget.
Common Gate Installation Problems We See in Westmont Homes
- Rusted hinge posts at the base. The marine layer puts salt-laden moisture on your gate every single night. A hinge post that wasn’t galvanized or a weld that wasn’t sealed can rot through in ten to fifteen years. It’s the number one cause of the “sagging gate” call around here.
- Ficus roots heaving the driveway slab under a slide gate track. Mature ficus and magnolia trees are everywhere in the 90047 ZIP. Their roots lift and crack the concrete, the track twists, and the wheels bind until the gate jumps off. The fix is track realignment plus slab work, not just new wheels.
- Cracked welds from summer heat cycling. Westmont hits the low-to-mid 90s for weeks on end. Steel frames expand and contract every day, which stresses old weld joints until they crack or snap. A gate that looks fine in March can separate at the corner weld by September.
- Wrong-permit installations. Because Westmont is unincorporated, automated gates must clear LA County Building and Safety. Contractors who assume City of LA rules apply hold up jobs and sometimes install gates that don’t pass inspection. We handle the county paperwork from the start.
Pricing for Gate Installation in Westmont, CA
Every gate installation job in the 90047 ZIP gets a written line-item price before we order a single part. On a typical Westmont swing gate, you’re looking at roughly $2,400 to $4,600 for a manual steel gate, and $4,800 to $7,800 for an automatic setup with the operator, safety photocells, keypad, and the LA County electrical permit. Slide gate installations in Westmont usually start around $3,500 and run to $8,000 and up, depending on gate length and how much slab work the driveway needs first. The price you see on the quote is the price you pay. We don’t show up and discover a problem that doubles the invoice. You’ll know what you’re paying before we start, and we honor it. Call (877) 610-2993 for a free measure and an exact written price.
Westmont Gate Installation Done for the Salt Air, Not Against It
Westmont sits about eight to ten miles inland from the Pacific. It’s close enough that the overnight marine layer drops moisture on every bare steel surface, but far enough that nobody thinks of it as a coastal climate. That’s exactly why so many gates around here rust out earlier than they should. The spec that works in Pasadena doesn’t survive in Westmont. Bare painted steel hinges corrode from the inside and seize. Galvanized steel buys a few extra years. What actually lasts is stainless steel hardware and zinc-rich primer on every cut edge and weld. It costs a little more up front and you won’t see the result for ten years, but you’ll see it when your neighbor’s gate is on a jack with the hinge post snapped at the base and yours is still swinging true.
One job sticks with us, on a post-WWII bungalow street in the 90047 ZIP. We replaced a 1990s wrought iron swing gate whose hinge post had rusted through at the base from years of marine-layer moisture. Our crew set a new steel post in a deeper concrete footing, swapped the corroded hinges for stainless, and installed a LiftMaster gate operator with a fresh safety photocell and keypad entry. The sag correction issue was gone for good, because we fixed the root problem with proper Gate Repair in Westmont instead of shimming the gate to hide it.
We Also Serve Cities Near Westmont
We work throughout the South LA basin, including Westmont and the neighboring communities of View Park-Windsor Hills, West Athens, Inglewood, and Lennox. If you’re right on the edge of the 90047 ZIP, don’t worry about whether you’re in the “right” service area. Give us a call and we’ll tell you straight.
Serving Westmont, CA - Our Local Coverage Area
We’re based in the Westmont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Westmont
An automatic gate in Westmont requires an electrical permit from LA County Building and Safety, and depending on gate height, column placement, and whether you’re building new columns or a driveway approach, you may also need a building permit and possibly a setback review. Because Westmont is unincorporated, the City of LA has no jurisdiction here. The permit path is through the county offices in Alhambra or online through the county’s EPIC LA portal. We handle the permits for every automatic gate install we do in the 90047 ZIP and we include the permit fees in the written quote. Call (877) 610-2993 and we’ll walk you through exactly what your gate needs.
The hinges aren’t the problem. On a Westmont gate, the sag almost always starts at the base of the hinge post, where years of marine-layer moisture and soil contact have rusted the steel. The post flexes or gives way, and the gate drops. Tightening the hinges changes nothing because the hinges are fine. The fix is a new post set in a deeper concrete footing with stainless hardware. We do that job regularly in the 90047 ZIP, and the 90-Day Done Right Promise covers it in writing. Call (877) 610-2993 and we’ll come look at the post before you spend another afternoon with a wrench.
The ficus trees that line so many Westmont streets send surface roots under driveway aprons and sidewalks, lifting the concrete over time. If your slide gate track is anchored to a slab that’s already moving, the wheels bind, the gate hops the track, and the opener burns out trying to push it. On a new install, we check the slab first and may need to grind or reset the track bed before we mount anything. On a 90047 lot, skipping that check means a track that fails within the first year. Call (877) 610-2993 and we’ll check the concrete before we quote the gate.
Yes. Solar gate openers work well on Westmont lots where running conduit from the house to the gate post would mean cutting through old concrete or landscaping. We install solar operators from Linear and Ghost Controls regularly, sized to your gate’s weight and the number of cycles per day. One thing to know: a solar opener needs a clear panel location that gets direct sun. If your gate sits under a mature magnolia canopy, the panel won’t keep the battery topped up. We’ll tell you honestly whether solar makes sense on your lot before you spend the money. Call (877) 610-2993 for a free solar vs. hardwire assessment at your place.
Loop detectors are required on most automatic slide gates in LA County if the gate opens or closes across a driveway or pedestrian path. Even on a straight gate replacement, if the old gate had loops and you’re keeping it automatic, you likely need working loops or an equivalent safety edge system. The county inspector will check. We install loop detectors and wireless safety edges on every automatic slide gate we build in Westmont, and we won’t quote an automatic gate without including them. Call (877) 610-2993 and we’ll tell you exactly what your specific gate needs to pass inspection the first time.
Get a Free Gate Installation Quote in Westmont
If you’re in the 90047 ZIP and the gate is sagging, the track is binding, or you’re just ready for a new automatic driveway gate, call (877) 610-2993. A live person answers, day or night, and we’ll schedule a free measure at your house. You’ll get a written price before any work starts, and the whole job carries the 90-Day Done Right Promise in writing. Gate Installation in Westmont isn’t a side gig for us. It’s the job Hal Gatewood has been doing since 2001, and it’s the reason his name is on the shop and on every invoice.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Westmont since 2001.