Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tuckahoe
Gate installation in Tuckahoe, NY runs $2,800 to $14,000 depending on whether you’re replacing a pedestrian gate on a tight side yard along Main Street or building a double swing driveway gate with an operator near the Bronx River. We’re Gatewood Fence & Gate, and we’ve worked on gates in Tuckahoe’s 10707 zip code long enough to know which properties sit low enough to flood, which pillars were poured shallow in the 1930s, and which streets catch the worst of the wind off the river corridor. If your gate post tilts after a hard rain or your gate drags on the drive every spring, call Hal Gatewood at (877) 610-2993 and he’ll tell you straight what’s wrong before anyone sets foot on the property.
Why Gatewood Fence & Gate Is Tuckahoe’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001 and his name is still on every invoice. You can verify his license, read his published address, and if you want to look him in the eye before signing anything, drive to the shop and he’ll shake your hand. We answer the phone with a live person 24 hours a day, seven days a week. No voicemail, no answering service, no screen prompts. When a Tuckahoe homeowner calls at 6 a.m. because a nor’easter knocked their swing gate off its hinges, the person who picks up is the person who can actually send someone to your street.
Tuckahoe customers tend to call us after another company has already been out once or twice. Maybe the gate was installed with posts set only 24 inches deep in river silt and now it’s leaning. Maybe the operator was bolted to a masonry pillar that’s been cracking for twenty winters. Our crews don’t start by selling you a replacement gate. We start by finding out why the one you have is failing. Hal’s crew welds on site, resets posts at proper depth, and fixes what’s actually broken. Every job carries the 90-Day Done Right Promise in writing: if it’s not done right, one call brings us back, no runaround.
Dispatch and scheduling are coordinated from our New York City office; locally, our crews serve Tuckahoe and know the village’s narrow side yards, its pre-war gate stock, and its flood-prone low streets. That’s the difference between a gate company that knows Tuckahoe and one that just typed your zip code into a GPS.
Our Gate Installation Services in Tuckahoe
Driveway Gate Installation
A driveway gate in Tuckahoe is often a swing design on a concrete or paver drive, set between brick pillars that were built alongside the house in the 1930s. We measure for the actual opening, check how level the posts are, and match the gate to the house’s era. When we replace a driveway gate here, we set the hinge posts in bell-bottom footings at least 42 inches deep because we know the soil near the Bronx River doesn’t hold a shallow pour. We also make sure the gate’s weight and wind profile match the operator you have, or the one we’ll install.
Pedestrian Gate Installation
Pedestrian gates in Tuckahoe are often wedged into side-yard passages no wider than 40 inches, flanked by a house wall on one side and a masonry pillar on the other. That constraint is local, not theoretical: many of these lots were platted for semi-attached homes built in the 1920s as Metro-North Harlem Line commuter housing. Installing a pedestrian gate here means working in a space where the post hole has to be dug by hand and the hinges have to carry the gate without pulling the pillar out of plumb. We build these as self-supporting frame-and-post assemblies rather than hanging the gate off an already-stressed brick column.
Sliding Gate Installation
Sliding gates aren’t as common in Tuckahoe as swing gates, but when the driveway slopes toward the street or the side yard leaves no room for a swinging leaf, a slide is the right call. We install cantilever and V-track slides with sealed-bearing rollers that don’t bind when silt from flood events gets into the track. On homes near the Bronx River corridor, we spec a track with drainage weep holes and set the receiving posts deeper than manufacturer minimums, because standing water is a regular feature of the lower streets here.
Swing Gate Installation
Swing gates dominate in Tuckahoe because the village’s pre-war driveways were designed for them. These jobs hinge, literally, on the posts. We reset or replace posts at a minimum of 42 inches with a bell-bottom pour when we’re in floodplain silt, and we always check the existing pillars for freeze-thaw cracking before hanging a new leaf. A swing gate on a solid infill panel catches full wind load, and on a narrow side yard that wind has nowhere to go. We size the hinges and operator accordingly, and we weld hinge tabs to a steel post core instead of anchoring into crumbly old brick.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tuckahoe
We’re certified to service nine major gate brands, and when Tuckahoe customers ask for a particular operator we usually have it or can get it same week. That includes Viking, Ghost Controls, DoorKing, and Elite. If you already have an operator on a failing gate, we’ll tell you honestly whether it’s worth keeping. Hal’s repair-first philosophy means we don’t sell you a new Viking board when a corroded limit switch is the actual problem. We carry common parts for these brands in our stock, which means a service call in Tuckahoe doesn’t turn into two weeks of waiting on a backordered board.
See our full range of Gate Installation work across driveway, pedestrian, sliding, and double gate setups.
Common Gate Installation Problems We See in Tuckahoe Homes
- Post footings sunk in river silt. Original Tuckahoe gates were often set in 18 to 24 inches of concrete poured directly into silty, flood-prone soil near the Bronx River. After a few heavy rain events, the post tilts, the gate drops, and the operator’s rack and pinion binds. The fix is a deeper bell-bottom footing, not a shim.
- Masonry pillars cracked by freeze-thaw cycles. Westchester runs 30-plus freeze-thaw cycles every winter. Water works into the hairline cracks in a 1930s brick pillar, freezes, expands, and widens the crack until the hinge side of a swing gate drops a quarter inch and drags on the drive. We see this every spring on Lake Avenue, Columbus Avenue, and the streets running down toward the river.
- Wind load on solid infill panels. A solid metal gate on a narrow side yard acts like a sail. When a coastal storm pushes wind up the Bronx River valley, an undersized operator or hinge set fails at the welds. We spec wind-rated designs for exposed runs and check weld quality before the next storm season.
- Manual-release confusion during power cuts. Tuckahoe’s tree-lined streets mean power outages during nor’easters are common. We walk every customer through the safe manual-release procedure on their operator, and we make sure the release key or pull is accessible from outside the gate so you’re not trapped in or out when the power dies. Never attempt to force a motorized gate by hand without disengaging the operator first: the gears can bind and the gate can move suddenly.
Pricing for Gate Installation in Tuckahoe, NY
We quote prices in writing before any work starts, and that’s the price you pay. The quote is agreed before we dig or weld anything, and it does not change at the door.
| Job | Typical Tuckahoe Range |
|---|---|
| Pedestrian gate, steel frame, installed | $1,400 - $3,200 |
| Single swing driveway gate, steel or aluminum | $2,800 - $6,500 |
| Double swing driveway gate | $4,500 - $9,500 |
| Sliding gate with track | $4,000 - $10,500 |
| Swing gate operator, installed | $1,800 - $3,400 |
| Post reset with bell-bottom footing | $900 - $2,200 per post |
What moves the price in Tuckahoe: how deep the old footing is (and whether it’s in floodplain silt), whether the pillar is salvageable or needs a steel core, the gate’s wind exposure, and whether you need new conduit and power run for an automatic operator. Standing offers apply: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate on your specific gate.
We Also Serve Cities Near Tuckahoe
We work throughout Gate Installation in Tuckahoe and the surrounding villages. Our crews regularly serve Eastchester and Bronxville, where the soil drains better and gates stay plumb longer, plus Wykagyl and Scarsdale, where larger lots and newer construction present different footing and wind-load conditions. Wherever you are in southern Westchester, the same phone call gets you Hal and the same 90-Day Done Right Promise.
Serving Tuckahoe, NY - Our Local Coverage Area
We’re based in the Tuckahoe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tuckahoe
42 inches minimum, with a bell-bottom pour, when you are anywhere in the low-lying streets near the Bronx River corridor. The original footings on many Tuckahoe gates were poured 18 to 24 inches deep directly into silty floodplain soil, and that is why posts tilt after heavy rain. We auger below the silt line, bell out the base, and set a galvanized steel post. It costs more up front than a shallow pour and it survives what the river basin gives you. Call (877) 610-2993 and we’ll look at your specific property before quoting.
Yes, if the gate itself is structurally sound. We do this regularly on Tuckahoe’s pre-war wrought-iron driveway gates. The gate leaf is rarely the weak point: it’s the hinge post, the footing, and the pillar. We assess the iron for cracks, re-weld or reinforce as needed, set the hinge post properly, and then mount the operator. Last spring we installed a LiftMaster swing gate operator on a 1930s wrought-iron driveway gate along Lake Avenue, where two decades of Bronx River flood cycles had rotted the original post footing. Our crew augered to 42 inches, set a galvanized steel post in a bell-bottom concrete footing, and hung the gate with new sealed-bearing hinges. When the next nor’easter pushed three feet of water through the yard, the gate stayed plumb and cycled smoothly via the manual-release key during the power cut.
Find the manual-release mechanism on your operator and disengage it before attempting to move the gate by hand. Most solar and DC operators have a keyed release or pull handle on the motor unit or the gate frame. With the operator disengaged, the gate swings or slides freely and safely. Do not push a motorized gate without disengaging first: the gears can bind and the gate can lurch hard enough to hurt someone. If your release is rusted, hidden behind the gate, or you can’t find it, call (877) 610-2993 and we’ll walk you through it over the phone or come out to Tuckahoe.
Because the post footing was likely too shallow for Tuckahoe’s soil, and the first heavy rain event settled it. Gates sag when the hinge post tips out of plumb. We see exactly this pattern along the Bronx River corridor: a post that looked fine in dry summer weather sinks a half inch or more after autumn flooding soaks the silt around the footing. The gate then binds at the latch and drags on the drive. The permanent fix is excavating to 42-plus inches and setting a new post in a bell-bottom footing below the saturated zone. Shim plates and hinge adjustments buy you a few weeks, not a fix.
Yes, automatic gates are required to meet UL 325 and ASTM F2200 safety standards, including entrapment protection: contact edges or photo eyes that reverse the gate if it hits or senses a person or vehicle. This is not optional. When we install an automatic gate anywhere in Tuckahoe, the job includes the required safety edges or photo eyes, warning signage, and proper setting of the operator’s force limits. We also verify the manual-release is functional and accessible before we leave. If you have an existing automatic gate in Tuckahoe without working entrapment protection, call (877) 610-2993 and we’ll bring it up to standard.
Get Your Tuckahoe Gate Installed Right
If your gate post leans after every hard rain, your gate drags across the drive every spring, or you’re ready for a new gate on a lot the river occasionally reminds you about, call Gatewood Fence & Gate at (877) 610-2993. We’ll send someone who knows Tuckahoe’s soil, its housing stock, and its flood patterns. You will get a written price before any work starts, the 90-Day Done Right Promise on the job, and Hal Gatewood’s name on the invoice. We’ll install your gate the way we would on our own place: posts set deep, hinges welded to steel, and a gate that stays plumb through the next flood year.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tuckahoe since 2001.