Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Tuckahoe
Gate repair in Tuckahoe usually costs between $180 and $650 depending on whether we’re realigning a sagging hinge, resetting a post that’s heaved out of the Bronx River floodplain silt, or replacing an obsolete control board on a 1970s operator. Most jobs we handle in Tuckahoe are done same-day or next-day because we keep hinge kits, weld rod, and the common board replacements for Viking, Ghost Controls, and DoorKing operators on the truck. If your gate is dragging on the side-yard walkway or the motor stopped responding after the last freeze-thaw cycle, call (877) 610-2993 and Hal or one of his crew will tell you over the phone what you’re probably dealing with before anyone even shows up.
We’re not a gate repair franchise that subcontracts to whoever is available. Gatewood Fence & Gate has been owner-operated since 2001, and the person who answers the phone around the clock knows what happens to ornamental-iron hardware in a village that sits on the Bronx River corridor. That local knowledge matters more here than in almost any other Westchester town, because Tuckahoe’s gates fail in very specific ways tied to the ground they sit on.
Why Gatewood Fence & Gate Is Tuckahoe’s Preferred Gate Repair Company
We’ve repaired enough gates in Tuckahoe to know the difference between a hinge that’s worn out and a post that’s slowly sinking. That distinction isn’t academic. The original shallow footings under many 1920s and 1930s gates in Tuckahoe were poured into silty river-basin soil, which means a gate can read as “just sagging” when the real problem is that half the hinge post’s footing has been soaking in saturated ground for eight decades. Fix the hinge only, and you’ll be calling again after the next heavy rain. We start from the post.
Homeowners in Tuckahoe don’t ask for a gate company that shows up in a rented truck with a fresh logo. They want to look the person in the eye and know that person will come back if something isn’t right. That’s who we are. Hal Gatewood’s name is on the shop and on every invoice. Every job carries the 90-Day Done Right Promise in writing. One call brings him back, no runaround. And calls are answered by a live person 24 hours a day, not a voicemail or an answering service three states away. When you call (877) 610-2993, you get a real person who works for Gatewood, and that person knows what a hinge post on Hilton Road looks like after a bad winter.
Our Gate Repair team has also built a reputation in Tuckahoe for the stuff we don’t do: we don’t quote one price on the phone and change it at the door, we don’t recommend replacing a 1930s iron gate that just needs a weld repair and a realignment, and we don’t try to sell you a motor that’s stronger than the gate it’s rated to move. We repair what can be repaired and we say so plainly when replacement is the cheaper long-term answer.
Our Gate Repair Services in Tuckahoe
Electric Gate Repair
Most electric gates in Tuckahoe are retrofits, not factory installations. The original ornamental-iron swing gates on pre-war houses were never built for automation, so we regularly find motors and operators from the 1980s, 1990s, and early 2000s mounted to hinges and posts that were never meant to handle the load. That combination creates a specific Tuckahoe problem: the operator works fine, but the hinge side of the gate is slowly tearing away from the brick. We repair the motor and the mounting point, because fixing one without the other just means the job comes undone twice.

Automatic Gate Repair
Automatic gate repairs in Tuckahoe tend to follow the seasons. Winter freeze-thaw cycles put stress on photo-eye alignments, keypad wiring, and the limit switches that tell the gate where to stop. Spring and heavy summer rain bring intermittent short circuits from water that’s worked its way into corroded junction boxes near the Bronx River corridor. Hal and his crew have seen all of it. Whether the problem is a Viking board that won’t hold a programmed remote, a Ghost Controls arm that’s grinding, or a DoorKing keypad that went dead after a January thaw, we diagnose and repair the box in the driveway, not in a shop across the county.

Hinge & Post Repair
This is the one service call we get in Tuckahoe more than anywhere else in our service area. The narrow side-yard layouts on streets like Crestwood Place and Winfield Avenue mean many pedestrian gates and small driveway gates are confined between a house wall and a masonry pillar. Over decades, freeze-thaw cycles have cracked those pillars and the original shallow post footings have tilted. We weld cracked hinge plates, reset posts into deeper and properly drained concrete, and replace original mortise hinges with adjustable ball-bearing units whenever the old metal has seized. If the post is the problem, we fix the post first. A gate sags in the hinge post, not in the middle, and that is where we start.

Gate Realignment
A realignment in Tuckahoe often follows the same script: the gate has been dragging on the walkway for months, someone adjusted the latch, then adjusted it again, and now the gate won’t close against the stop. We bring the sector back into plumb, correct the hinge alignment, and check whether the pillar itself has moved. Many original brick pillars have rotated slightly as the ground around them has saturated and drained hundreds of times over the building’s life. There’s no way to fix that from the middle of the gate. We work from the hinge post and the pillar, because that’s where the problem actually lives.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tuckahoe
We’re certified to service nine major gate brands, and in Tuckahoe we see a lot of legacy Viking operators, Ghost Controls swing arms, and DoorKing slide-gate systems still running after decades. That’s good, because these older units can usually be repaired rather than replaced when a board goes out or a limit switch stops reading the gate’s position correctly. We stock the common relays, boards, and hinge kits for those brands locally. For Tuckahoe customers that means less waiting on a parts truck coming from a distributor two counties away. When we do need to order something specific like an obsolete control board, Hal tells you at the estimate stage what it will cost and how long it will take before you commit to anything.
Common Gate Repair Problems We See in Tuckahoe Homes
- Posts tilting or sinking after heavy rain. The lower-lying streets near the Bronx River are built on silty, flood-prone soil, and many of the original gate footings were only poured two feet deep. After a few days of heavy rain, a post that was plumb in March can be leaning an inch by May.
- Seized ornamental-iron hinges from persistent ground saturation. The constant moisture in Tuckahoe’s soil accelerates rust on the original 1920s-1950s hinges and wrought-iron joints. We regularly replace mortise hinges that have seized solid enough that the gate hasn’t swung freely in a decade.
- Pillar cracks from freeze-thaw pressure. Tuckahoe averages more than 30 freeze-thaw cycles a year. Water works into the hairline cracks of a 1930s brick pillar, freezes, expands, and widens the crack. We repair the pillar or reset the post before re-hanging the gate, otherwise the new alignment won’t hold through winter.
- Legacy operators with obsolete control boards. Homes around Tuckahoe Village and the Crestwood station area still run pre-UL 325 operators that no longer meet modern safety standards. When the board gets fried after a storm or a flood event, we assess honestly whether the unit can be safely retrofitted or whether a new operator is the only way to keep anyone using the gate from getting hurt.
Pricing for Gate Repair in Tuckahoe, NY
A hinge replacement or basic gate realignment in Tuckahoe runs $180 to $350. Resetting a tilted or sunk post into a deeper, drained footing runs $400 to $650 depending on the pillar condition and the access. Weld and rust repair on an ornamental-iron gate usually lands between $200 and $500. Replacing a burned-out or obsolete control board on an older Viking or DoorKing operator typically costs $250 to $600 installed, while a full operator replacement can run $900 to $1,800. These are real numbers from work we’ve done on Tuckahoe properties, not a generic metro average. And the price we quote is the price you pay, agreed before any work starts. There’s no trip charge inside the county, and we offer $40 off any repair over $200. Hal also keeps a standing 10% discount for seniors and veterans permanently in place. Call (877) 610-2993 for a free estimate. If you have a written quote from another company, bring it and we’ll give you a free second opinion.
We Also Serve Cities Near Tuckahoe
We work throughout this corner of Westchester County, and Gate Repair in Tuckahoe often takes us into the neighboring communities as well. If you’re just over the line in Eastchester, Bronxville, Wykagyl, or Scarsdale, the same crew, the same on-site welding rig, and the same 90-Day Done Right Promise apply.
Serving Tuckahoe, NY - Our Local Coverage Area
We’re based in the Tuckahoe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Tuckahoe
Because the original footings under many Tuckahoe gates were poured shallow in Bronx River floodplain silt. When the ground saturates, the footing loses bearing and the post leans. The lasting fix is to dig deeper than the original footing, set the post in a properly drained concrete base, and add drainage so water can’t pool around the base. Call (877) 610-2993 and Hal will come look at the post before you spend money on anything else.
Yes, in most cases. We can retrofit photo-eye sensors, auto-reverse pressure limits, and current UL 325-compliant controls onto an older gate, but the hinge posts and pillar condition have to be structurally sound first. We’ve done this on several 1950s-era gates around the Crestwood station area, and Hal will always tell you honestly if the cost to retrofit a given gate is higher than replacing the panel and operator together. Call (877) 610-2993 for a free on-site assessment.
Depends on the panel. The sag is almost always at the hinge post, not in the middle of the gate itself. If the iron panel is structurally sound, we weld cracked joints, replace the mortise hinges with adjustable ball-bearing units, and reset the post if it’s deteriorated. Fix the panel without the post and you’ll fix it twice. If the panel itself is rusted so thin that the weld won’t hold, we’ll tell you that too before you spend a dime. Call (877) 610-2993 and we’ll quote it free.
Yes. Slide gates near the river corridor in Tuckahoe have a persistent problem with track rollers that seize or wear unevenly because of grit and sediment from flooding. We repair, replace, and shim old rack and pinion tracks, and we check the track’s drainage when you’re close to the floodplain, because standing water under the track is what kills the rollers in the first place. Call (877) 610-2993 for an exact quote.
Usually the keypad’s internal wiring has been compromised by moisture that worked its way in during a freeze-thaw cycle. In Tuckahoe, we see keypad shorts and control board failures more often in the weeks after a hard winter than during the winter itself, because the thaw lets water migrate through tiny cracks in the keypad housing and into the board. We test the keypad at the connection point before recommending a replacement. Call (877) 610-2993 and we’ll talk you through what to check first, then come out if it needs a board.
If your gate is dragging, sagging, or just stopped responding, call (877) 610-2993. Hal answers the phone. He’ll ask what the gate is doing, what kind of operator it has, and whether it’s rained recently. The estimate is free and the price we quote won’t change at the door.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tuckahoe since 2001.





Before
After
Before
After
Before
After