Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across Tracy
Gate installation in Tracy runs $2,100 to $7,800 for a typical residential driveway gate, with most single swing gates landing between $2,800 and $4,600 and slide gates starting around $3,500. We build gates that hold up to Altamont Pass wind. Hal Gatewood has been setting posts, welding frames, and mounting operators since 2001, and he still answers the phone himself. Call (877) 610-2993 for a free measure and a written price before any work begins.
Why Gatewood Fence & Gate Is Tracy’s Preferred Gate Installation Company
We know Tracy’s gate problems because we fix the ones other companies installed wrong. The wind out here is not a minor factor. It is the whole story. A gate that sags in Discovery Bay might have a hinge issue. A gate that sags in Tracy is usually a post that was never deep enough to begin with. Hal’s crew works Tracy neighborhoods in the 95377, 95378, and 95391 zip codes every week, and the person who measures your gate is the same person who installs it. We do not hand your job to a subcontractor we met last Tuesday.
Every installation carries the 90-Day Done Right Promise in writing. If something is not right, one call brings Hal back. No runaround, no dispatch queue, no phone tree. You call, a live person picks up, and we make it right. That has been how we operate since the day we hung our sign in 2001. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
When you need Gate Installation in Tracy, you want someone who knows that a Mountain House gate and a west-side Tracy gate are two different jobs. Sandy loam soil, wind loading, HOA specs. We account for all of it before we ever dig a hole.
Our Gate Installation Services in Tracy
Driveway Gate Installation
A driveway gate in Tracy is a working piece of equipment, not a decoration. We frame in steel or aluminum based on the wind exposure at your specific lot, then set posts below the frost line and beyond the wind-load minimum. Tracy’s sandy loam does not hold a shallow post. In the 95391 ZIP especially, we routinely go 12 to 18 inches deeper than the original builder spec because we have seen what two Tracy winters do to a 3-foot footing.

Pedestrian Gate Installation
Pedestrian gates take a beating out here because they are light enough for the wind to slam but heavy enough to tear hinges when it does. We use reinforced hinge posts and heavy-duty self-closing hardware. If the gate opens toward a wall or fence line in a tight Tracy side yard, we set the reveal so the latch side never drags. You want it to close soft, not bang shut twenty times a day when the Delta breeze kicks up.

Sliding Gate Installation
Sliding gates make sense on Tracy lots where a swing gate would eat half the driveway or conflict with a shared right-of-way. We build cantilever and tracked slide gates, but in Tracy we favor cantilever designs when the soil allows. Tracked slides out here clog with wind-blown dust from the Altamont corridor, and a clogged track means an overworked motor and a thermal trip. Cantilever keeps the rollers off the ground and the gate gliding through dust season.

Swing Gate Installation
Swing gates are the most common gate in Tracy’s master-planned communities, from the older west-side tracts to the newer east-side subdivisions off 11th Street. The failure we see most is not the operator. It is the hinge post. Wind pushes on a 14-foot gate panel all day, every day, and if that post was set shallow or without enough concrete mass, the whole gate leans into the prevailing wind within two winters. We size the post and the footing for the wind load, not for the gate catalog.
We also install double gates for wide driveways, security gates with keypads or card readers, and full systems with vehicle and pedestrian access that has to keep working during the work. You do not lose driveway access because we are on-site. Hal plans every install around keeping your cars moving.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tracy
We install and service gate operators from Viking, Ghost Controls, and DoorKing, among others. These are the brands we see on Tracy homes every week, and we stock the parts that matter locally: solar panels and batteries that hold up in 100-degree summers, circuit boards that handle dust, and rack and pinion kits for Viking slide units. If you already have a DoorKing operator on a failing gate, we can usually save it. We do not sell new equipment when the old unit has ten more years in it. Hal has been certified on nine major brands, and he will tell you straight if your operator is worth saving.
Common Gate Installation Problems We See in Tracy Homes
- Wind-racked gate frames: Sustained 25 to 35 mph Delta winds push against the gate panel year-round, and once the frame goes out of square, the latch side starts dragging on the ground even while the operator keeps running. The fix starts at the hinge post, not the latch plate.
- Leaning swing gates from shallow posts: Original builder installs in tract communities across Tracy often used 3-foot post footings. That is not enough here. Within two winters, the post starts to lean into the prevailing wind and the gate panel follows. Deeper footings and more concrete mass are the standard, not the upgrade.
- Slide gates binding on dusty tracks: Wind-driven dust from the Altamont corridor settles in the roller channel on tracked slide gates. The motor over-amps, trips thermal overload, and the gate stops halfway. We address this with cantilever designs or sealed roller assemblies when site conditions allow.
- Operator motor fatigue in Mountain House: In the 95391 ZIP, entire blocks of homes got the same builder-spec operators in a tight 2003-2012 window. Those Viking and LiftMaster units are now failing within months of each other from wind-induced motor fatigue. If your neighbor’s gate just died, yours is probably next.
Pricing for Gate Installation in Tracy, CA
Honest numbers, Tracy market. A single swing gate with a basic operator runs $2,800 to $4,600. A sliding gate on a cantilever system runs $3,500 to $6,900 depending on length and whether we are prepping new post locations. Double swing gates for wide driveways run $4,800 to $7,800 with a dual-operator system. Pedestrian gates run $1,200 to $2,400 installed. These are installed prices, not “starting at” bait. The quote we give you after measuring your site is the price you pay. That price is agreed in writing before any work starts. Call (877) 610-2993 for an exact quote, estimates are free, and there is no trip charge inside the county.
We Also Serve Cities Near Tracy
Our crews work Tracy and the surrounding communities every week. We install and repair gates in Mountain House, Discovery Bay, Livermore, and Brentwood. If you are just outside Tracy and wondering whether we cover your street, call and ask. Hal will tell you straight. For full details on our local coverage, see Gate Installation in Tracy.
Serving Tracy, CA - Our Local Coverage Area
We’re based in the Tracy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tracy
Because Tracy’s Altamont Pass wind corridor pushes sustained 25 to 35 mph against gate panels year-round, and the sandy loam soil in that ZIP does not hold a shallow post under that load. Most Mountain House builders set gate posts at 3 feet. We set them 12 to 18 inches deeper, with more concrete mass, because a gate that leans after two winters is a gate you pay for twice. Call (877) 610-2993 for an exact quote, estimates are free.
Usually yes, provided you have enough lateral room along the fence line for the gate to slide. A steep approach actually argues against a swing gate, because a low-hanging panel clips the grade as it arcs. We assess the side clearance, the soil at the track line, and the wind exposure, then spec a cantilever or tracked slide that fits. Call (877) 610-2993 for an exact quote, estimates are free.
A dual-operator system with separate motors on each leaf, sized for the wind load at your specific lot. A single operator running both leaves through a long drive arm works harder than it should in Tracy wind and dies early. We typically install Viking or DoorKing dual systems on double gates in the 95377 and 95391 ZIP codes, with a battery backup so the gate still works during power outages. Call (877) 610-2993 for an exact quote, estimates are free.
Yes on the HOA, and often yes on the permit. Most of Tracy’s master-planned communities, especially in Mountain House and the newer east-side subdivisions, have CC&Rs that govern gate height, material, and color. If the gate crosses a shared right-of-way or is set within a public utility easement, the city permit office typically requires plans. We help you pull the paperwork and build to the approved spec. Call (877) 610-2993 for an exact quote, estimates are free.
You size the battery for the heat, not for the panel output. Tracy summer temperatures over 100 degrees shorten battery life and degrade wiring insulation inside the operator housing. We install solar openers with heat-rated sealed batteries, a panel angled for winter sun, and a controller that shuts down charging above 120 degrees instead of cooking the battery. Ghost Controls solar systems get a lot of use on Tracy gates for this exact reason. Call (877) 610-2993 for an exact quote, estimates are free.
Call Gatewood Fence & Gate for Gate Installation in Tracy
If your gate is leaning, dragging, or dead, call Hal Gatewood at (877) 610-2993. We measure your site, account for the wind and soil, and give you a written price before any work starts. 90-Day Done Right Promise on every job. $40 off any repair over $200. No trip charge inside the county. A live person answers the phone, day or night. If you would rather talk in person, drive to the shop and look Hal in the eye. The name is on the invoice, and the work is on the gate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tracy since 2001.





Before
After
Before
After
Before
After