Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Access Control Across Tracy
Gate access control in Tracy usually means one of three jobs: adding a keypad or intercom to a gate that was installed manually, replacing a builder-grade operator that has burned out, or wiring a smart access system into an HOA community that needs it to work on the first try. We have been doing all three across Tracy since long before the Mountain House tract homes started hitting their 15-year failure window. Hal Gatewood knows which operators fail on which blocks, because he has been the one pulling them apart. Call us at (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Tracy’s Preferred Gate Access Control Company
Tracy is a long-drive town for out-of-town companies and a short-drive town for us. That matters when a gate operator goes down at 7 a.m. and you cannot get your car out. We send a real person, not a subcontracted crew, and that person arrives in a marked truck with the right parts already loaded for the common Tracy failures we see week after week.
Homeowners around Mountain House, Redbridge, and the newer east-side tracts off Corral Hollow Road keep our number because we do not sell them parts they do not need. The name on the shop is Hal Gatewood, the shop is locally owned and owner-operated since 2001, and the 90-Day Done Right Promise is stamped in writing on every invoice. If it is not done right, one call brings him back.
For a city of gated communities and HOA-managed entry systems, having someone who can actually weld on site, wire a keypad properly, and talk to an HOA board without jargon is the difference between a two-day fix and a two-month headache. Our Gate Access Control in Tracy customers tend to be homeowners who have already paid somebody else once, and they call us after the gate failed again.
Our Gate Access Control Services in Tracy
We service the full range of Gate Access Control systems, but in Tracy the calls cluster around a few specific jobs. Here is what we do most often.
Keypad Entry
A keypad on a Tracy gate takes a beating. Altamont winds blow dust and grit into the membrane buttons, and summer heat over 100°F bakes the wiring connections inside the housing. We install commercial-grade keypads with sealed contacts, run the wiring in conduit the way it should have been done at the build, and program entry codes for everyone who needs one. If your keypad is mounted on a post that shifts in the wind, we fix the post too, because a keypad that reads fine on a leaning post is still a keypad that will fail again.

Remote Control
Most Tracy gates that came with remotes from the builder used LiftMaster or Viking receivers paired to clickers that are now a decade old. We can clone, replace, or upgrade remotes, add a receiver where one was never installed, and get everyone in the household access without handing out a half-broken fob. If your remote stopped working the same week your gate started grinding, the remote is probably not the problem, and we will tell you that instead of selling you a new one.

Phone Entry
Phone entry systems let you open the gate from a call, which is the cleanest retrofit for a Tracy home where the gate was installed manual during the original build and nobody ever ran low-voltage wire to it. We install cellular-based phone entry that does not depend on your home internet, wire it to the operator properly, and program the bypass paths so deliveries, family, and the occasional landscaper can get in without you being home.

Card Reader
HOA communities and multi-home properties in Tracy use card readers at the shared gate. We install and service proximity readers, key fob systems, and card-based access tied to the same boards we already repair. When a card reader stops reading, it is usually a blown capacitor on the controller board or a ground fault in the buried loop, and we chase both on site rather than quoting a full system replacement.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tracy
We are certified to work on nine major gate brands, and in Tracy that most often means Linear, Viking, Ghost Controls, and DoorKing operators, plus the LiftMaster units that the Mountain House tract builders installed by the thousands. We keep the common relays, boards, and photocells for those systems on our trucks headed to Tracy, which means a service call in 95391 or 95378 usually wraps up in one visit instead of two. When a board is truly gone rather than repairable, we quote the replacement honestly before ordering anything.
Common Gate Access Control Problems We See in Tracy Homes
- Builder-grade operator motors burning out early. The LiftMaster and Viking units installed in Mountain House and east-side tracts between 2003 and 2012 were not sized for sustained Altamont winds. The motor fights the wind on every open and close cycle, overdraws, and burns out years earlier than it should.
- Gate posts shifting in wind-exposed soil. Tracy’s post-1995 subdivisions sit on compacted fill that dries and shifts. A post that moves even a half inch throws a swing gate out of rack, which overloads the access control board and kills keypads and remotes.
- Photocells and loop detectors false-triggering. Wind-blown dust from the Altamont Pass coats the safety eye lenses on street-facing gates. When a photocell reads a false obstruction, the gate will not close, and the access control system looks broken when it is actually just dirty.
- Keypads and intercoms never wired for automation. Many Tracy homes had a gate installed manually and the conduit run never happened. We routinely pull the low-voltage line years after the build and tie it into a proper automation system.
Pricing for Gate Access Control in Tracy, CA
A keypad or phone entry retrofit in Tracy typically runs $450 to $1,100 installed, depending on whether we are pulling new wire or working with existing conduit. A new operator with remote control on a single swing gate runs $1,600 to $3,200, and video intercom systems with a monitor inside the house land between $900 and $2,400. Card reader systems for HOA gates start around $600 per reader plus the panel work. If a Tracy gate post needs to be reset and reinforced before any access control will hold, that adds $350 to $900 depending on the footing. We quote the full price before any work starts and write it down.
There is no trip charge inside the county, and every Tracy estimate is free. If you already have a written estimate from another company, bring it to us for a second opinion at no cost. Current standing offers include $40 off any repair over $200 and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Tracy
From the Mountain House side of 95391 to the newer subdivisions east of town, our crews cover Tracy and the surrounding communities. We work regularly in Mountain House, Discovery Bay, Livermore, and Brentwood, and scheduling is coordinated from our Central Valley office in Fresno. Call (877) 610-2993 and the person who answers will tell you straight up when we can be there.
Serving Tracy, CA - Our Local Coverage Area
We’re based in the Tracy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Tracy
Because they were all installed by the same handful of tract builders during the same 2003 to 2012 build-out window, using the same builder-grade LiftMaster and Viking operators. The Altamont winds load those motors the same way on every cycle, so the failure pattern repeats block by block. That is why we now see whole streets in 95391 hitting motor fatigue in the same season. When yours fails, call (877) 610-2993 and we will tell you honestly whether the operator is repairable or the whole unit has to go.
Yes, and it is one of the most common jobs we do in Tracy’s newer subdivisions. The builders rarely ran the conduit or low-voltage wire for automation, so we pull it now, mount the operator, and tie in whatever access method you want. If the gate post has shifted, we fix that first, because automating a racked gate just transfers the damage into the new operator. Call us at (877) 610-2993 for a free site look.
First, the hinge post moves. A gate sags in the hinge post, not in the middle, and Tracy’s compacted subdivision soil, combined with sustained Altamont winds, works posts loose faster than most areas. Once the post has moved even a half inch, the gate binds, the operator overloads, and the access control board mounted inside the operator housing takes the electrical hit. We fix the post, not just the gate leaf, and then the system holds.
Yes. Automatic gate operators installed in Tracy must have a monitored photo eye or equivalent entrapment protection, and we will not energize an operator without it. Beyond code, a photocell that is working properly keeps the gate from closing on a car, a child, or a delivery driver. Wind-blown dust fouls the lenses fast out here, so we clean and align them on every visit and we tell you how often to check yours. Call (877) 610-2993 with any safety question and we will answer it plainly.
95378 and 95391 lead, with 95376 close behind. Mountain House in 95391 is the standout because of the matching builder-era equipment and the wind exposure, but we run calls in 95304 and across the older parts of Tracy too. If you give us your ZIP when you call, our crews will bring the parts they know that area uses.
Call Gatewood Fence & Gate for Gate Access Control in Tracy
If your Tracy gate is no longer answering the keypad, the remote is dead, or the operator just grinds, call us at (877) 610-2993. A live person answers around the clock. We will tell you what the problem likely is, what it will cost, and when we can be there. The estimate is free, the price is agreed before any work starts, and the 90-Day Done Right Promise is in writing. Hal Gatewood has been doing this since 2001, and in Tracy, that means the person who quotes the job is the one who stands behind it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tracy since 2001.





Before
After
Before
After
Before
After