Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across The Village
A new driveway gate in The Village runs $1,850 to $6,500 installed, depending on width, automation, and whether you go ornamental iron, aluminum, or heavy steel. Most single-swing pedestrian gates fall between $700 and $2,200. If the gate is on a long rural driveway where you can’t get line voltage, solar operators add $400 to $1,100 to the job. Call (877) 610-2993 and we’ll give you a written number before anything gets ordered.
We work the ranch-style properties off Lake Hefner Parkway and Britton Road every week, so we know the gates out here. Built in the ’50s and ’60s, fixed up in the ’80s, and left alone since then. Hal Gatewood started this shop in 2001 doing repair work other companies wouldn’t touch, and that repair-first habit still shapes every installation we do. If the hinge post is sound, we don’t sell you a new post. If the panel can be saved, we save it.
Why Gatewood Fence & Gate Is The Village’s Preferred Gate Installation Company
Hal’s name is on the shop, and the shop is a short drive from 73116. That’s the oldest accountability there is. When you call, a live person answers, not a voicemail, not a menu tree. When we quote a price, you’ll recognize the same number on the invoice. And if something isn’t done right, the 90-Day Done Right Promise means one call brings Hal back. No runaround.
The Village has its own municipal code enforcement, separate from Oklahoma City. That matters more than most people realize, and we’ll get into it below. The short version: a crew that does most of its work in OKC proper can miss local requirements here and hand you a gate that fails inspection. We don’t, because we pull for 73116 regularly and we check before we set the first post.
We’re not a faceless outfit three states over. We’re local, owner-operated, insured and bonded, and Hal has been at this since 2001. Seniors and veterans get a permanent 10% discount. If you already have a written estimate from another company, bring it to us for a free second opinion. No trip charge inside the county, and $40 off any repair over $200.
Our Gate Installation Services in The Village
Driveway Gate
The dominant gate type in The Village is the ornamental iron double swing driveway gate, a lot of them original to the 1950s and 1960s builds. If yours is still hung but dragging, sagging, or refusing to latch, the problem is usually the hinge post, not the panel. A gate sags in the hinge post, not in the middle, and that’s where we start. New steel posts set in concrete footings dug below Oklahoma’s active clay zone solve the problem once.
Pedestrian Gate
Backyard walk gates on these modest ranch lots take real abuse. Kids, dogs, garden carts, and six decades of Oklahoma weather all load the hinges. We stock heavy-duty self-closing hardware and magnetic latches, and when the existing masonry pillar has moved with the soil, we set a steel post and box frame the opening so the gate stays square when the clay shrinks in August.
Sliding Gate
Sliding gates are the workhorse answer for long driveways with grade changes or tight turnaround area. If you’ve got an acreage entrance off extension of Hefner Road or up toward the northern edge of The Village, a cantilever or wheeled slide gate with a heavy-duty open like a DoorKing or Linear unit handles the span where a double swing would fight itself. We size the track and the operator together, because undersizing the motor is how wide gates fail early.
Swing Gate
Swing gates are the classic look for The Village, but wide farm-style panels on acreage entrances flex and sag at the hinge when a light-duty operator is asked to move a panel rated for half the load. We measure the actual panel weight, not the nominal spec, and pair it with an operator built for the load. If the entrance gets heavy use, we’ll recommend a Ghost Controls or LiftMaster unit and a reinforced hinge frame.
Double Gate
A double swing gate across a wide drive doubles the hinge surface and halves the panel span, which is usually the right structural choice. But it also means two posts taking seasonal torque from the red clay, so we dig deeper footings and cross-brace the hinge frame. If you’re automating a double gate, UL 325 entrapment protection is not optional, and in The Village the local code adds its own set of eyes to the inspection.
We also handle Gate Installation posts, panel work, frames, and hardware on every job we take. The gate stays in your driveway while we weld on site, because hauling it to a shop for something fixable is the kind of practice that made national chains a bad name out here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in The Village
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we keep local parts stock for the brands most common on The Village’s older installs. Most of the time we can pull parts from our own shelf instead of ordering and waiting a week. If you call about a Linear arm on a 1968 iron gate or a Ghost Controls solar unit, we’ve likely got the bits in hand. That’s the difference between a working gate this week and a working gate next month.
Common Gate Installation Problems We See in The Village Homes
- Post-heave from Oklahoma clay. Expansive clay swells in spring rains and contracts in summer drought, and it will rotate a shallow-set post out of plumb inside a year. If the footing isn’t dug below the active clay zone, the gate starts dragging and failing to latch, and the new operator burns itself out trying to move a bound panel.
- Undersized operators on wide farm gates. A big double swing or slide panel needs an operator sized for its actual loaded weight, not its showroom weight. We see light-duty units bolted onto heavy iron panels all the time, and the motor’s the first thing to die.
- Missing entrapment protection. Older automatic gates around The Village often have no photocells, no contact edges, no presence sensor. That’s not just a safety problem, it’s a code failure that will come up when you go to sell or when an inspector hooks into the circuit.
- Nuisance tripping from alignment drift. A gate that reverses for no reason is usually a photocell pair that’s drifted out of alignment as the posts moved with the soil. The gate panel looks fine, but the brackets shifted a quarter inch and the beam’s now breaking where it shouldn’t.
Pricing for Gate Installation in The Village, OK
A standard single-swing ornamental iron driveway gate in The Village runs $2,400 to $4,800 installed, including new steel hinge posts and manual hardware. Double swing gates land between $3,800 and $6,500. If you’re adding automation, add $1,200 to $2,800 for the operator, controls, and safety edges, and if you’re running power out to a fence line where mains can’t reach, a solar package runs $1,600 to $3,200 installed. Sliding gates with heavy-duty operators sit at the top of that range because the track, rollers, and motor have more mass to manage.
Two things stretch the bill in The Village specifically: deep footings for Oklahoma’s clay movement and automation retrofits when the existing posts can’t carry the load and have to be pulled. Every estimate is written, itemized, and handed to you before any work starts. The price we quote is the price you pay. Call (877) 610-2993 for a free measure and written quote covering your exact gate and your exact property.
Free estimates. Free second opinion on any written estimate from another company. $40 off any repair over $200. A permanent 10% discount for seniors and veterans. No trip charge inside the county.
We Also Serve Cities Near The Village
Our crew covers The Village and the surrounding communities, including Warr Acres, Oklahoma City, Bethany, and Edmond. If you’re just across the line from 73116 in one of those, call anyway. Dispatch runs from our Oklahoma City office, and the person who answers can tell you straight if we’re the right shop for your job. We’re not far from The Village homes and we show up when we say we will.
Serving The Village, OK - Our Local Coverage Area
We’re based in the The Village area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in The Village
The Village has its own municipal government and code enforcement separate from Oklahoma City, so an automatic gate installation in 73116 can require a local permit and inspection that differs from the parcels just across the street in OKC jurisdiction. The safest route is to have your installer verify requirements with The Village’s code office before any concrete gets mixed. We do this as a standard part of the job. Call (877) 610-2993 and we’ll walk you through what your specific gate needs here.
Yes, and in The Village this comes up constantly because the older lots have long driveways with mature landscaping between the panel and the nearest breaker. A solar gate opener with a deep-cycle battery bank handles these sites cleanly: the panel, the operator, and the battery all mount at the gate, no trenching, no transformer. We pair solar with a low-current operator like a Ghost Controls or LiftMaster unit sized to the panel, and we spec enough battery reserve for winter ice storm dead-weight conditions. For a site-specific solar design, call (877) 610-2993.
Usually you need new hinge posts and hinges, not a new gate. A gate that still looks straight but drags at the latch side has almost certainly had its posts torqued out of plumb by Oklahoma’s clay cycle, and the problem is below the ground, not in the panel. We’ll level the existing gate, plumb the posts, and set new hinges before we talk about a new panel. Most of the time the old ornamental iron has decades left in it.
A double swing gate with an automatic operator requires entrapment protection that meets UL 325, which for this setup typically means monitored photocells across the opening, contact sensing edges or equivalent pressure-sensitive detection at the entrapment points, and a audible alarm. The Village’s code enforcement may also require a separate inspection and keypad or vehicle detection. We install every automatic gate to UL 325 as a baseline, then layer on local code. This is not a spot to save money.
If the posts are straight, above the active clay zone, and the wall thickness hasn’t rusted through, we’ll reuse them. But in The Village’s 60 to 70-year-old ranch housing, we’re more often pulling posts that look solid on the surface and have rot at the soil line or a lean you can feel with a level. We’ll cut a test window if needed, and if the post has any meaningful deflection or thin wall where it meets the concrete, we replace it. Reuse when it’s honest, replace when it isn’t.
Call Gatewood Fence & Gate for Gate Installation in The Village
If you’ve got an aging gate on a 1960s ranch off Britton Road, a post that’s slowly leaning with the seasons, or a driveway wide enough for a double swing that you’d like to automate without trenching for power, call (877) 610-2993. You’ll get a real person. You’ll get a written estimate before any work starts. And if it’s not done right, you’ll get Hal back to make it right. That’s the deal, and it’s been the deal since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving The Village and the surrounding communities.