Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Stonegate
A new driveway gate in Stonegate typically runs $3,800 to $9,200 installed, depending on whether you need a single swing gate, a double gate, or a sliding gate with automation. Most installations take one to two days once the SVCA paperwork clears, and we quote the full price in writing before any work starts. If you live in Stonegate, you already know the Architectural Review Committee has a say in what goes up on your property, and that’s exactly the kind of detail we handle so you don’t have to. Call (877) 610-2993 and we’ll walk your property, check the ARC requirements, measure the span, and give you a real number.
We’ve been doing this work long enough to know that Stonegate is not Parker and it’s not Dove Valley. The homes here were built on a tight timeline with a specific set of HOA rules, and those rules still govern what you can install today. Our Gate Installation team has pulled permits, filled out ARC submission forms, and matched finishes on homes throughout 80134. Hal Gatewood’s name is on the shop, and he’s the one who answers when there’s a question about your gate.
Key Takeaways for Stonegate Homeowners
- Gate installation in Stonegate requires SVCA ARC review before work begins, and unapproved gates can be flagged and forced into re-do.
- Most Stonegate gates are 20-30 year old original HOA-spec aluminum or iron, which means new work has to match the approved palette.
- Clay-heavy soil and freeze-thaw cycles tilt hinge posts here. New gates need post footings deeper than the movement zone or you’ll fix the same sag twice.
- Spring hail along the Palmer Divide dents aluminum picket gates and cracks older powder coat. We pre-schedule repair and replacement work for May and June.
- Every job carries the 90-Day Done Right Promise in writing. If it’s not right, Hal comes back.
Why Gatewood Fence & Gate Is Stonegate’s Preferred Gate Installation Company
We’re not a national outfit with a rotating crew. We’re locally owned and owner-operated, and Hal Gatewood has been at this since 2001. When you call about a gate in Stonegate, the person who shows up is part of a small crew that knows the SVCA’s pre-approved hardware list, the common original builder-grade operators, and the specific failure patterns on homes built in the 1990s and early 2000s. That saves you time and can save you the cost of a second submission to the ARC.
Stonegate customers call us because their neighbor had a bad experience with a contractor who installed a gate that looked fine but wasn’t on the approved list. The SVCA flagged it, and the homeowner paid twice. We’ve been through enough of these jobs to know which finishes, hinge styles, and operator models pass the first time. Hal has walked dozens of Stonegate properties. He’s seen the original LiftMaster operators that never had proper post footings. He’s spotted rack and pinion binds on Northstar Drive and throughout the eastern pockets of the SVCA. That’s the kind of local knowledge you get when the owner’s name is on every invoice.
We answer the phone with a live person 24 hours a day, seven days a week. Not a voicemail. Not a third-party call center. If your gate is stuck open at 10 p.m. and you’ve got a dog that needs to stay in the yard, call (877) 610-2993 and you’ll talk to someone who can actually help.
Our Gate Installation Services in Stonegate
Driveway Gate
Driveway gates in Stonegate follow the original HOA spec closely, and for good reason. The SVCA wants a consistent look across the neighborhood, which means ornamental aluminum or iron with a specific finish range. We measure your driveway span, check the grade, and recommend a single or double gate that matches the ARC-approved palette. A typical single driveway gate in Stonegate runs $3,800 to $6,500 installed. A double driveway gate usually lands between $5,500 and $9,200 depending on width and automation.
Pedestrian Gate
Pedestrian gates are the workhorses of Stonegate backyards, and at 5,900 feet they take a beating from UV exposure. The powder coat on an aluminum pedestrian gate here can start failing within 8-12 years, faster than lower elevation Front Range cities. We install pedestrian gates with heavier-duty hinges than the original builder-grade hardware and match the finish to your existing fence line. Most pedestrian gate installations in Stonegate run $900 to $2,400.
Sliding Gate
Sliding gates make sense on Stonegate properties with steep or curved driveways where a swing gate would drag or bind. We install cantilever sliding gates that don’t ride on a track through the gravel, which matters in a climate where freeze-thaw cycles heave the ground every winter. A new sliding gate with a Viking or BFT operator typically runs $4,800 to $8,500 in Stonegate. The operator matters more than most people think, and we’ll explain why during the estimate.
Swing Gate
Swing gates are the most common style in Stonegate, and they’re also the style that shows the most problems on original 1990s installations. The failure is almost always the hinge post, not the panel. Douglas County’s clay-heavy soil shifts with every freeze-thaw cycle, so a post that wasn’t set below the movement zone tilts over time. The gate sags, the latch stops catching, and the operator binds. We set new post footings deeper than the original builders did, then hang the gate so it swings true. Swing gate installations in Stonegate run $3,200 to $7,000 depending on size and whether you’re replacing existing posts or pouring new ones.
We also install double gates, which are common on Stonegate corner lots and properties with wider driveway returns. A double gate is really two swing gates that meet in the middle, and they need to be hung so both wings close evenly through years of soil movement. We’ve replaced more than a dozen driveway gates in the Stonegate neighborhoods around Northstar Drive and the eastern pockets of the SVCA, and the failures follow a pattern: original builder-grade LiftMaster operators that never had post footings poured to code, so once freeze-thaw cycles shift a hinge post, the swing gate sags and the rack and pinion binds. Our crew pulled one recent aluminum double gate, set new post footings below the clay-heavy soil’s movement zone, swapped in a BFT operator with a proper loop detector and safety photocells, and matched the ARC-approved finish exactly. The homeowner avoided a re-submission and the gate swings true today.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Stonegate
We’re certified to service nine major gate brands, and in Stonegate we work most frequently with DoorKing, BFT, and Ghost Controls operators. We keep common parts for these brands on hand so a Stonegate repair doesn’t stall waiting on a shipment. If your existing gate has a LiftMaster operator that’s failing, we can often replace the operator only and keep the existing gate panel, posts, and hardware. That’s the repair-first philosophy Hal has run on since 2001. He’d rather fix the gate in your driveway than sell you a new one.
Common Gate Installation Problems We See in Stonegate Homes
- ARC non-compliance: Contractors from outside the metro install a gate without checking the SVCA’s approved hardware list, and the community association flags the work, forcing the homeowner to pay for removal and replacement. We check the list before we quote.
- Missing entrapment protection: Original gate operators installed during the 1990s build-out were never wired for entrapment protection. Adding a modern operator without retrofitting safety photocells and loop detectors violates UL 325 and fails inspection. We retrofit the full safety package on every automated gate.
- Post heave and sag: Clay-heavy Douglas County soil with freeze-thaw cycles gradually tilts hinge posts on gates that lacked proper post footings, causing sag and hinge corrosion that homeowners mistake for a panel problem. Show me the gate closing on its own and I’ll show you where it’s failing, and usually it’s the post.
- Hail season damage: Spring hail storms along the Palmer Divide corridor hit Stonegate harder and more frequently than metro Denver to the north. We see a predictable surge of dented aluminum picket gates and cracked powder-coat finishes every May and June, and experienced local technicians schedule for it in advance.
Pricing for Gate Installation in Stonegate, CO
Here’s what we see in Stonegate’s market for new gate installation, including labor and materials but excluding any ARC fees the SVCA charges separately:
- Single swing driveway gate: $3,800 - $6,500
- Double swing driveway gate: $5,500 - $9,200
- Sliding driveway gate with operator: $4,800 - $8,500
- Pedestrian gate: $900 - $2,400
- Post replacement with new footings: $450 - $1,100 per post
- Operator installation with full safety package: $1,200 - $2,800
What changes the price most is your post situation and your operator choice. If the existing posts are sound and set deep enough, we can save you the cost of new footings. If they’re original 1990s posts sitting in the movement zone, you’ll pay for new footings now or pay twice later. We quote the full price before any work starts. No trip charge inside the county, a free second opinion on any written estimate, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a written estimate.
We Also Serve Cities Near Stonegate
While most of our Stonegate work stays in the 80134 zip code, we regularly install gates for homeowners in Castle Pines North, Parker, Dove Valley, and Lone Tree. The HOA rules, soil conditions, and hail patterns differ in each of these towns, so if you’re in one of those areas, give us a call and we’ll talk through what applies on your street.
Serving Stonegate, CO - Our Local Coverage Area
We’re based in the Stonegate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Stonegate
Yes, virtually every gate replacement or installation in Stonegate requires ARC approval through the Stonegate Village Community Association before work begins. The SVCA maintains a pre-approved list of materials, finishes, and styles, and a gate that’s not on that list can be flagged and you’ll be forced to remove and replace it at your own cost. We can help you navigate the submission process and recommend gates that pass the first time. Call (877) 610-2993 and we’ll walk you through it.
The gate sags at the hinge post because Douglas County’s clay-heavy soil expands and contracts with freeze-thaw cycles, and if the original post wasn’t set below the movement zone, it gradually tilts over the years. Fix the panel without the post and you’ll fix it twice. A sagging gate is usually a footing problem, and the fix is digging out the old post, pouring a deeper footing, and re-hanging the gate.
Yes, you can add automation to a manual gate, but most Stonegate gates from the 1990s and 2000s were never wired for entrapment protection. Adding a modern operator without retrofitting safety photocells and loop detectors violates UL 325 and will fail inspection. We handle the full retrofit: operator, photocells, loop detector, and the power run that should have gone in during the build but usually did not. Call (877) 610-2993 for an exact quote.
If your gate operator lacks entrapment protection, it fails UL 325 and creates a genuine safety hazard for kids, pets, and anyone using the driveway. A gate that reverses because it hit something should have stopped before contact. We retrofit the full safety package on every automated gate we install or service, and we won’t leave a gate running without proper photocells and loop detectors. If yours is missing that protection, call us and we’ll get it sorted.
Spring hail along the Palmer Divide corridor around Stonegate is frequent and hard on aluminum gates. Hail dents picket gates, cracks older powder-coat finishes, and drives a surge of repair and replacement calls every May and June. If you’re planning a new gate, spring is a good time to get on the schedule early. We pre-schedule for the seasonal rush and can usually get Stonegate installations done within one to two weeks of ARC approval. Call (877) 610-2993 and we’ll get you on the calendar.
Call Gatewood Fence & Gate for Your Stonegate Gate Installation
If you live in Stonegate and you’re tired of a sagging gate, a dead operator, or a manual gate you’d like automated, call (877) 610-2993. Hal Gatewood will answer or call you right back. We’ll come out, look at your posts, check the ARC requirements, and give you a written price before any work starts. The name is on the shop, the shop is down the road, and the 90-Day Done Right Promise is stamped in writing on every job. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Stonegate since 2001.