Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Stonegate
Gate access control in Stonegate means working inside the rules of the Stonegate Village Community Association. Every keypad, intercom, card reader, or smart access upgrade has to use ARC pre-approved hardware and finishes, or the work gets flagged and redone. We’ve handled that approval process for years, and we’ll file the paperwork before we turn a wrench. If your gate opener is failing, your keypad won’t take the code, or you want a video intercom added to a 1990s entrance, call Hal at (877) 610-2993. We’ll give you an honest answer and a written price before any work starts.
Why Gatewood Fence & Gate Is Stonegate’s Preferred Gate Access Control Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop. That’s the kind of accountability that matters in Stonegate, where the HOA keeps a close eye on gates and the people who work on them. We know the approved hardware palette for Stonegate Village, we know which original gate brands were installed during the mid-1990s and mid-2000s build-out, and we know how the management company wants modification forms handled. Local homeowners call us because we show up when we say we will, and because a live person answers the phone around the clock, not a voicemail.
Stonegate customers also know our 90-Day Done Right Promise is stamped in writing on every job. If something isn’t right, one call brings us back. No runaround. No fine print. And since we weld on site and repair before we replace, we’re not looking to sell you a new operator when a gear replacement and an alignment fix would get you another five years.
Our Gate Access Control Services in Stonegate
We service the access control systems already installed across Stonegate’s roughly 2,500 homes, and we upgrade them when the HOA’s approval is in hand. Most of the gates here are ornamental wrought iron or aluminum, installed to original spec, and now 20 to 30 years old. That age shows up in the electronics, the hinges, and the post anchors. Here’s what we handle most often.
Keypad Entry
Stonegate gates with original keypads are typically Linear or DoorKing units that have survived decades of high-elevation UV and spring hail. When the keypad housing cracks or the membrane buttons stop registering, we replace with ARC-approved models and match the finish to the existing gate. We also rewire and reprogram so the old code still works for everyone in the household, or set new codes if you’ve had a tenant change or housekeeping turnover.
Video Intercom
Adding a video intercom to a Stonegate gate built in the 1990s is entirely possible, but it has to be done within the ARC’s finish and mount-style rules. We hardwire or use encrypted wireless where the HOA allows, mount the camera to match the existing post, and integrate it with your in-home monitor or smartphone. You see who’s at the gate before anyone gets access. That matters on streets like Stonegate Parkway, where foot and vehicle traffic is constant.
Smart Access
Smart access for Stonegate usually means controlling the gate from your phone, setting temporary codes for contractors or guests, and getting alerts when the gate opens. We can retrofit a Ghost Controls or Viking system onto an existing ornamental gate, but the hardware has to meet the Community Association’s approved list first. We’ll file that form for you. Then we program the app, test the safety edges and photocells, and walk you through it before we leave.
Remote Control
If your clicker stopped working, it may not be the remote. Often the receiver board inside the operator has drifted or failed due to heat and cold cycles at 5,900 feet. We diagnose the whole chain, remote to antenna to receiver to motor, so you don’t buy a new remote that still doesn’t work. We stock remotes compatible with LiftMaster, FAAC, Linear, and Ghost Controls operators commonly found on Stonegate gates.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Stonegate
We are certified to service nine major gate brands, and on Stonegate jobs we most often work on Linear, DoorKing, and Viking hardware, since those showed up repeatedly in the original mid-90s and mid-2000s installations. We keep common boards, remotes, keypads, and gear sets on the truck, so most access control repairs on this side of Douglas County are finished in one visit. If we need a part that isn’t on the truck, we source it locally and return fast, not weeks later.
Common Gate Access Control Problems We See in Stonegate Homes
- Rust-bound hinge posts that trip entrapment faults. Stonegate’s intense UV at 5,900 feet degrades powder coating faster than lower elevations. Once bare metal shows, rust forms around hinge posts and binds movement, and the operator trips the safety circuit and quits.
- Freeze-thaw tilting of swing gate posts. Douglas County clay soil shifts with freeze-thaw cycles every winter. That gradual tilt pulls the rack and pinion out of line on swing gates and strips drive gears, which is why a gate that worked in September fails in March.
- Spring hail damage to keypads and photocells. The Palmer Divide corridor around Stonegate takes harder and more frequent hail than Denver to the north. Dents in aluminum pickets are cosmetic, but cracked keypad housings and knocked-out safety photocells are functional, and they tend to show up right before summer HOA inspections.
- Failed FAAC and DoorKing operators from 20+ years of cycles. The uniform build era means we see the same original operator models across dozens of Stonegate properties. At 20 to 30 years old, the motor capacitors and limit switches are simply spent, and the gate stops responding to remotes and keypads alike.
Pricing for Gate Access Control in Stonegate, CO
Here are real numbers for Stonegate’s market, not vague estimates. A keypad replacement in Stonegate typically runs $220 to $380 depending on the model and whether we need to run new low-voltage wire from the house. Adding a video intercom to an existing gate runs $650 to $1,150 including the ARC-requested mounting hardware. A smart access retrofit with phone control starts around $550 and goes up from there based on the operator and app integration. Remote control programming or receiver repair runs $90 to $180. Every job is quoted and agreed to in writing before we start, so the price on the estimate is the price you pay. Call (877) 610-2993 for a free estimate specific to your gate.
We Also Serve Cities Near Stonegate
Besides our regular Gate Access Control work across Stonegate, we serve Castle Pines North, Parker, Dove Valley, and Lone Tree. If you’re just down the road and wondering whether we cover your street, call us. We probably do, and we’ll tell you honestly if we don’t. For the full picture of what we do, see our Gate Access Control in Stonegate page.
Serving Stonegate, CO - Our Local Coverage Area
We’re based in the Stonegate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Stonegate
Yes, Stonegate’s Architectural Review Committee requires pre-approval for gate access control changes, including operator replacements and smart access upgrades. We identify the ARC-approved hardware that fits your gate, file the modification form with the Stonegate Village Community Association management company in advance, and don’t start work until it’s cleared.
Spring moisture combined with clay-heavy Douglas County soil is the usual culprit. The freeze-thaw cycles shift the gate post slightly, and that movement pulls low-voltage keypad wiring just enough to break the circuit. We find the break, splice it properly, and re-secure the conduit so the same failure doesn’t return next spring. Call (877) 610-2993 if you’re tired of entering the code twice.
Yes, you can. The original gate post and wiring channel can almost always support a modern video intercom, but the unit and mounting style must match the ARC’s approved finishes. We install the intercom, wire it to your home, and file the modification paperwork so there are no surprises at the next review.
At 5,900 feet with high UV and spring hail, we recommend a service check once a year for swing gate operators in Stonegate. That visit catches rust at hinge posts, worn gears from freeze-thaw post tilt, and hail-cracked photocell housings before the gate fails entirely. It’s cheaper than an emergency repair in June.
If the hardware isn’t on the ARC’s pre-approved list, the management company can flag the work and require you to redo it at your own expense. We’ve seen it happen. The hardware still functions, but the finish or model doesn’t match community standards, and the homeowner pays twice. That’s why we file the form first and use only Stonegate-approved equipment. Call (877) 610-2993 before you schedule, and we’ll tell you if your plan will pass.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Stonegate since 2001.