Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Sheridan
Gate installation in Sheridan, CO almost always starts below ground, and that’s the part most companies skip. On the original 1950s and 60s ranch homes that fill this city, the hinge posts were often set shallow in clay-heavy soil, and decades of freeze-thaw cycles have canted them several degrees out of plumb. So when you call about a new driveway gate or a replacement swing gate, the honest answer is usually a new post footing first, then the panel and hardware. That’s the work we do every week in Sheridan. Call (877) 610-2993 and you’ll get a live person who knows the difference between a hinge adjustment and a structural fix.
Why Gatewood Fence & Gate Is Sheridan’s Preferred Gate Installation Company
The name on the shop is Hal Gatewood, and the shop has been owner-operated since 2001. That matters around Sheridan because this is a small, dense city where word travels fast. When a neighbor on West Oxford Avenue gets a gate fixed and it’s still working three winters later, the next call comes from two doors down. We’ve built our reputation in this area one post footing at a time.
Crews serve Sheridan locally, scheduled and coordinated from our Denver office, so when you call you’re not routed through a phone tree. A real person answers, 24 hours a day, and that person can tell you when someone will be at your house. The person who shows up is background-checked, uniformed, and works for Hal, not a subcontractor.
We also put the 90-Day Done Right Promise in writing on every job. If the gate isn’t done right, one call brings us back. No runaround. No fine print. For Sheridan homeowners who have been burned by a quote that changed at the door, that’s the only kind of promise worth having. Our price is quoted and agreed before any work starts, and it doesn’t move.
Senior and veteran discounts are permanent with us: 10% off every job. We don’t ask you to haggle for it, and we don’t make you clip a coupon. Just mention it when you call.
Our Gate Installation Services in Sheridan
Most Sheridan properties are small-lot ranch homes with modest setbacks, but the gate work still spans everything from a 4-foot pedestrian gate off the back patio to a 16-foot double driveway gate on an acreage parcel near the South Platte. Here’s what we install most often in this city. Every job includes a free on-site measure and a written price before you commit to anything. Our Gate Installation team handles the full scope, from digging the footing to programming the operator.
Driveway Gate Installation
Driveway gates in Sheridan need to open and close reliably even when a post below them has been heaving for 40 years. We don’t hang a new panel on a bad post and call it done. We cut out the old footing, pour a new one below frost line (30 inches is standard in this soil), and set a heavy-duty post that will stay where we put it. For a typical single driveway gate on a Sheridan ranch home, you’re looking at $2,800 to $5,200 installed, depending on gate width, the operator you choose, and whether the second post needs the same treatment.
Pedestrian Gate Installation
Pedestrian gates get used harder than anything else on the property, especially on Sheridan’s interior streets where homeowners walk out to the alley or the back fence daily. The old galvanized frames from the 1960s are often rusted through at the bottom rail. We build the new frame to the opening, set it in fresh concrete, and install hardware that won’t freeze up in January. A new steel pedestrian gate with a locking latch and proper footings runs $900 to $1,800 in Sheridan.
Sliding Gate Installation
On the commercial side of Sheridan, particularly near the light-industrial corridor along Santa Fe Drive, sliding gates are the norm for vehicle access. These gates need a solid track bed and a properly sized operator, because a 30-foot steel slide gate that derails is a liability, not just an inconvenience. We handle welded steel slide frames, V-track or cantilever systems, and operators sized to the gate’s actual weight. Commercial slide gate installations in the Sheridan area generally run $6,000 to $14,000 depending on width, track type, and access control requirements.
Swing Gate Installation
Swing gates dominate Sheridan’s residential lots. The problem is rarely the gate panel itself. It’s the posts, which are typically shallow-set, rusted at the soil line, and frozen solid at the hinge pins. We re-set the hinge post in new concrete, sleeve or replace it as needed, and then install the new swing gate and operator. A double swing gate on a Sheridan driveway, including both post re-sets and a heavy-duty operator, typically lands between $4,500 and $8,000.
Double Gate Installation
Double gates are common where a Sheridan driveway is wide enough to need leaf clearance on both sides. The catch is that both posts need to be dead plumb and set below frost line, or one leaf will sag six months after install. We treat every double gate as two independent post jobs plus one hanging job. When both posts are replaced, a double swing gate with an operator runs $5,500 to $9,500 in Sheridan. On ranch properties just outside the city limits with longer gravel approaches, we often recommend a heavy-duty solar-capable operator like the Viking or Ghost Controls units.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sheridan
We install and service operators from Viking, DoorKing, and Ghost Controls, among the nine major brands we’re certified on. For Sheridan’s mix of residential swing gates and light-industrial sliding gates off Santa Fe Drive, Viking’s heavy-duty swing operators and DoorKing’s slide operators are particularly well suited. We stock common boards, remotes, and photo eyes for these brands, which means a repair or install isn’t waiting on a part from Texas. If you already have an operator and want to keep it, we’ll work with what you have. If it’s time to replace it, we’ll show you why the brand we’re recommending fits the gate and the way you use it.
Common Gate Installation Problems We See in Sheridan Homes
- Shallow post footings that heave every winter: Original 1950s and 60s installers often set gate posts 18 to 24 inches deep. That’s above frost line in this clay soil, so every freeze-thaw cycle pushes the post up and tilts it. A new gate panel hung on that post will bind within a year.
- Original galvanized hardware rusted through at the soil line: The post looks fine from four feet up, but dig down a few inches and the metal is flaking. This reads as a sagging gate, but the fix is post replacement, not hinge adjustment. We see it constantly on the small residential lots around West Oxford Avenue and South Federal Boulevard.
- Frozen or stripped hinge pins from decades of thermal cycling: The Denver metro’s chinook swings can move a post and a gate 50 degrees in a single day. That repeated expansion and contraction fatigues hinge pins until they seize. You can’t just swap the panel when the hinge is frozen to the post.
- Grade changes that alter the swing path: On Sheridan’s concrete-slab ranch homes, poured walkways and patios have often lifted or settled over the years, which changes the clearance under a new gate. We check the swing path against the actual grade before building anything, because a gate that scrapes concrete on day one won’t fix itself.
Pricing for Gate Installation in Sheridan, CO
You deserve square numbers before you decide anything. In Sheridan, a new single swing driveway gate with a re-set post and a standard operator typically runs $2,800 to $5,200. A double swing gate on a wide driveway runs $5,500 to $9,500. Pedestrian gates start around $900 and run to $1,800. Commercial slide gates off the Santa Fe corridor generally land between $6,000 and $14,000. Those ranges include the post work that most quotes conveniently omit. Things that move the number: gate width, whether both posts need digging out, operator type, solar versus line power, and the access control you want. We give you a written, upfront price before any work starts. The price we quote is the price you pay. Always. And every installation carries the 90-Day Done Right Promise in writing.
Standing offers in Sheridan: $40 off any repair over $200, no trip charge inside the county, free second opinions on any written estimate, and the permanent 10% senior and veteran discount. If someone else quoted you a gate and it feels high, bring it to us. We’ll look at it for free.
We Also Serve Cities Near Sheridan
If you’re just outside the city line, you’re still in our service area. We handle gate installation and repair in Sheridan proper plus Cherry Hills Village, Englewood, Columbine, and Lakewood. Same crews, same written pricing policy, same call answered by a live person.
Serving Sheridan, CO - Our Local Coverage Area
We’re based in the Sheridan area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Sheridan
Because the original posts were usually set shallow in clay-heavy soil, and decades of frost heave have canted them out of plumb. On a ranch-style home in central Sheridan, our tech found the original galvanized swing gate’s hinge post tilted 4 inches out of plumb from decades of clay-soil freeze-thaw. We cut out the rusted post footing, poured a new 30-inch concrete footing below frost line, and set a heavy-duty post before hanging a new LiftMaster swing gate operator with a safety photocell. If you skip the footing and just hang a new panel, the gap comes back the first winter. Call (877) 610-2993 and we’ll tell you honestly whether your post can be saved or needs to come out.
Yes, and on many of Sheridan’s small ranch lots, solar is actually the cleaner solution. Running conduit to a gate post can mean cutting an existing concrete pad or trenching through a mature yard. A solar-ready operator from Ghost Controls or Viking, paired with a properly sized panel, handles a single swing gate without any trenching. We install these regularly on Sheridan homes where the electrical panel is on the opposite side of the house from the gate. The panel needs a clear southern exposure, which most Sheridan lots have. We’ll check that when we come out for the free measure.
A heavy-duty linear swing operator. For wide double gates, an articulated arm or ram-style operator is undersized. You want a linear piston or a worm-drive swing operator sized for the actual weight and cycle rate of the gate. Viking’s swing operators are built for this, and DoorKing makes a linear model we use on wider acreage entrances. The key is matching the operator to the gate’s weight and wind load, not just its width. On an open acreage entrance with no windbreak, a 16-foot double gate can catch a lot of force. Call us at (877) 610-2993 for an exact recommendation and a written price.
Yes. Any automatic gate operator installed in Sheridan must meet UL 325 safety requirements, which means entrapment protection: photo eyes, reversing edges, or both, depending on the gate type and the operator. This isn’t optional equipment we upsell. It’s a code requirement, and it’s there so a gate doesn’t close on a child, a pet, or a delivery driver. And entrapment protection is a genuinely dangerous component, so this is not a DIY job. The wiring, the sensitivity programming, and the placement of the photo eyes all need a trained professional who does this work weekly. We set every operator to the manufacturer’s spec and test it before we leave.
For most commercial slide gates around the Santa Fe corridor, rack and pinion is the better choice. It handles more cycles per day, it’s smoother at the ends of travel, and it doesn’t develop the chain stretch that eventually causes a chain-drive gate to jerk. Chain-drive has its place on light-use residential slides and it costs less up front. But on a commercial driveway with dozens of vehicle cycles daily, the rack system’s longevity usually wins. We’ll price both for you. Estimates are free, and the number we quote is the number you pay.
Need a gate installed in Sheridan? Call (877) 610-2993 now. A live person answers, we’ll schedule a free on-site measure, and you’ll get a written price before any work begins. Hal Gatewood has been fixing and installing gates since 2001, and the name is on every invoice.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sheridan since 2001.