Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Sheridan
If your gate is dragging, leaning, or refusing to close, here’s the short version: in Sheridan, most gate failures trace back to the post footing, not the hinge. The original 1950s and 60s chain-link gates that dominate this enclave were set shallow in clay-heavy soil, and fifty-plus years of Denver freeze-thaw cycles have tilted those posts out of plumb. We fix that correctly, usually the same day we look at it. Call (877) 610-2993 and Hal or one of his crew will answer, not a voicemail tree.
Why Gatewood Fence & Gate Is Sheridan’s Preferred Gate Repair Company
Hal Gatewood has run Gatewood Fence & Gate since 2001, and his name is on the shop and on every invoice. That matters in a place like Sheridan, where people still check whether the person quoting the job can be found again next week. Dispatch and scheduling run out of the Denver metro office; the crew serves Sheridan locally. We answer the phone with a live person around the clock, and we show up when we say we will.
Sheridan customers call us because we do the structural work other companies skip. A gate that drags on the concrete usually is not a hinge adjustment problem, it is a post footing problem. We re-set posts in concrete, weld on site, and stand behind the work with a written 90-Day Done Right Promise. If it is not done right, one call brings Hal back, no runaround. We also hold a county license anyone can look up, and every technician is background-checked and uniformed. No faceless subcontractors, nobody passing through.
Our Gate Repair Services in Sheridan
We are Gate Repair specialists, and in Sheridan that means working on the steel and chain-link systems this town has been living with for generations. Here’s what we handle most often.
Hinge & Post Repair
This is the bread-and-butter job across Gate Repair in Sheridan. The original galvanized hinges on 1960s chain-link gates freeze, strip, or snap at the pin, and the posts themselves are usually leaning. We do not just swap the hinge and call it good; we re-set the post footing in concrete so the frame stops moving. On tight Sheridan lots, that is the difference between a gate that swings clean for ten years and one that drags again next spring.
Gate Realignment
Frost heave pushes posts, and pushed posts create frame gaps. The gate sags, the latch misses, the photocell loses alignment. We realign the frame from the post out, not the middle of the panel. Fix the panel without the post and you will fix it twice, especially around the clay soils near South Federal and the interior streets off Lowell.
Weld & Rust Repair
Rust is not cosmetic on a stress-bearing gate. Around Santa Fe Drive and the light-industrial corridor, we regularly see rusted-through bottom rails and hinge plates that look fine on top and are nearly gone underneath. We weld on site, in your driveway, so the gate does not leave the property. No hauling it to some shop across town.
Electric & Automatic Gate Repair
When an automatic opener refuses to close on a Sheridan lot, the culprit is usually a photocell that shifted when a post moved, or a limit switch fighting a frame that is out of plumb. We service Viking, Ghost Controls, DoorKing, and Elite openers, among others, and we diagnose the structural cause before blaming the motor. A new board will not fix a post that heaves a quarter inch every winter.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sheridan
We are certified to service nine major gate brands, and around Sheridan the ones we see most are Viking, Ghost Controls, and DoorKing, with plenty of Elite units on commercial driveway gates near the Santa Fe corridor. We keep common boards, arms, and sensor parts stocked, which means fewer week-long waits for a part that has to ship from a distributor. If your opener is older than the house’s second owner, we will tell you straight whether a repair is worth it or a replacement makes more sense, and we quote both before any work starts.
Common Gate Repair Problems We See in Sheridan Homes
- Hinge posts leaning out of plumb. The soil here is clay-heavy, and Sheridan’s post-WWII fence posts were often set shallow by 1960s contractors. Every freeze-thaw season lifts and tilts them a little more. Show me a gate that drags and I will show you a post that is three or four degrees off.
- Frozen or stripped hinge pins. Denver metro chinook swings can move the temperature 50 degrees in a day. Galvanized hardware expands and contracts until the pin seizes or the threads strip. We replace worn hardware before it snaps under load.
- Photocell and limit switch failures from post movement. An automatic gate that reverses for no reason usually has a sensor that moved when the post moved. We re-align the frame, then re-aim the sensors, in that order.
- Rusted-through bottom rails and post bases. The snowmelt sits at the soil line all winter. On Sheridan’s 1950s chain-link systems, the bottom rail is often the first structural member to let go. We weld in new steel and clean up the surrounding rust so the repair does not fail in two years.
Pricing for Gate Repair in Sheridan, CO
Here are real numbers for the Sheridan market. A basic hinge replacement on a chain-link residential gate runs $120 to $220. A post re-set with new concrete footing and galvanized post runs $275 to $450 depending on how much old concrete has to come out and whether we’re doing one post or two. Automatic gate opener diagnostics and minor repairs typically run $160 to $320. Weld and rust repair on a bottom rail or hinge plate runs $140 to $380 based on how much steel needs cutting and replacing. A full frame replacement with new posts on a standard 4 to 6 foot wide Sheridan driveway gate runs $600 to $1,200. Every quote is written before we touch the gate, and the price on the quote is the price on the invoice. We offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. A free second opinion on any written estimate from another company is also on the table.
We Also Serve Cities Near Sheridan
If you are just over the line, we work throughout the surrounding area including Cherry Hills Village, Englewood, Columbine, and Lakewood. Same crew, same 90-Day Done Right Promise, same phone number: (877) 610-2993.
Serving Sheridan, CO - Our Local Coverage Area
We’re based in the Sheridan area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Sheridan
Because the hinge post is moving. Sheridan’s clay-heavy soil swells and heaves through the winter, and a post set shallow in 1962 tilts a little more each year. By spring the gate corner hits the concrete. The fix is re-setting the post footing, not cranking the hinge. Call (877) 610-2993 and we will tell you if your post is the problem or something simpler is going on.
Usually you need at least one new post. The frame might be straight, but if the post it hangs from is leaning, any new frame will sag the same way within a year. We check the post first, and we will only replace what genuinely has to be replaced. Estimates are free and in writing before any work starts.
It is usually both. Frost heave tilts the post, which shifts the photocell beam, and now the opener thinks something is in the way. We re-plumb the post, re-aim the sensors, and only then test the motor. Replacing a board on a misaligned gate just burns your money. Call us for a diagnostic, and we will show you exactly what moved.
The bottom rail, where snowmelt and road salt sit against the galvanized steel all winter, and the hinge plate where the post meets the frame. We cut out the rotted section, weld in new steel, and treat the surrounding area so the rust does not creep back through next season. We do the welding on site, in your driveway.
On a tight Sheridan lot with good southern exposure near South Federal or the east-west streets, solar works fine for lightweight chain-link gates. On shaded lots or heavier steel gates, a wired opener with battery backup is more reliable, especially through the short December days. We will look at your gate, your lot, and your power access and tell you straight which setup makes sense. The quote is always before the work, no surprises.
Call Gatewood Fence & Gate for Gate Repair in Sheridan
If your gate sags, drags, or will not close, call (877) 610-2993 for a free estimate. A live person answers, day or night. Hal’s name is on the shop and the shop is down the road, and the 90-Day Done Right Promise is in writing on every job. Whether you are on a dead-end off Lowell or running a commercial driveway gate off Santa Fe, we will show up, look you in the eye, and fix it right the first time.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sheridan and the Denver metro area since 2001.