Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Sharon
Gate installation in Sharon, MA typically costs $2,800-$9,500 depending on whether you’re replacing a rusted legacy gate or starting fresh with a new automated system, and most projects take one to three days once materials arrive. We’ve been welding, hanging, and automating gates in Sharon since 2001, and we know exactly what this town’s moisture and freeze-thaw cycles do to steel and iron. Call (877) 610-2993 and you’ll get a live person who can tell you whether your old gate is worth saving or if you’re throwing money at a post that’s already failing.
Why Gatewood Fence & Gate Is Sharon’s Preferred Gate Installation Company
Hal Gatewood has been fixing and installing gates in Sharon for over two decades, and his name is on the shop and on every invoice. That’s not a slogan. When we install a driveway gate off Massapoag Avenue or a swing gate on a side street near Memorial Park Beach, we know we’ll see that homeowner again at the transfer station or the farmers market. That changes how we work.
Sharon customers call us for two reasons. First, we show up when we say we will. Second, we don’t sell replacements unless they’re actually needed. A gate sags in the hinge post, not in the middle, and that’s where we start. Other companies quote a full swap. We cut the post, pour a proper footing below the 48-inch frost depth, and rehang the gate square. That’s repair-first, and it’s saved Sharon homeowners thousands.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back, no runaround. And when you phone us at (877) 610-2993 at two in the morning because a gate won’t close, a live person answers. No voicemail, no queue, no call center three states away. Just someone who knows Sharon.
Our Gate Installation Services in Sharon
Most Sharon homes have either an ornamental iron swing gate on a long private driveway or a sliding gate across a wider opening. Both take a beating here. Our Gate Installation team handles the full range, and we weld on site so your gate stays in your driveway, not on a truck headed to a shop.
Driveway Gate
Sharon’s large-lot colonials and split-levels, most built between the 1960s and 1990s, frequently have driveways that slope toward the street. That pitch puts extra load on the hinge side of any gate. We set posts below frost depth, use heavier-gauge steel where the grade demands it, and account for how water runs off toward Massapoag or the town’s wetland corridors.
Pedestrian Gate
Side-yard pedestrian gates in Sharon are often the first thing to fail because they’re smaller, lighter, and contractors skimp on the hardware. We see hinge screws stripped out of cedar gate posts and latch plates bent from years of freeze-thaw flexing. We replace the post if it’s rotted, drill and epoxy new anchors, and set the gate so it swings free without dragging.
Sliding Gate
Sliding gates on Sharon’s wider driveways ride on a rack and pinion track, and that track doesn’t forgive a shifting post. When saturated soil near the town’s wetlands freezes and heaves a shallow 1990s footing, the gate binds, the motor strains, and the safety sensors trip constantly. We reset the footing below frost depth and realign the track so the gate rolls smooth. Fix the post without the track and you’ll fix it twice.
Swing Gate
Swing gates, especially double gates, are the most common installation we do in Sharon. The hinge posts carry the entire load, and near Lake Massapoag those cast-iron posts rust through at the base in five or six years, not the twelve you’d expect in Foxborough or Canton. We replace them with fresh steel, weld new hinge plates, and rebalance the gate so the operator isn’t fighting the weight.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sharon
We’re certified to service nine major gate brands, and in Sharon we work most often with LiftMaster, DoorKing, Viking, and Ghost Controls operators. If you have a 2004 DoorKing still running on its original board, we’ll keep it going if the board tests clean. If a Viking operator near Lake Massapoag has corroded terminals from five years of damp air, we’ll show you the green crust on the board before we recommend anything. We stock common parts for these brands so a Sharon repair doesn’t wait on a truck from three counties over, and our Gate Installation in Sharon customers get straight answers about whether their operator pairs with the gate they’re keeping.
Common Gate Installation Problems We See in Sharon Homes
Sharon has its own failure patterns. These show up on our work orders more than anything else:
- Rusted hinge posts near the lake. Evaporative moisture off Lake Massapoag plus road salt blown off Massapoag Avenue eats through cast-iron hinge posts in as little as five years. The gate tilts, the latch misses, and eventually the operator’s safety photocell trips on every cycle.
- Frost-heaved footings in wetland soils. Sharon logs 10-15 freeze-thaw events a typical winter, and saturated soils expand hard when they freeze. Shallow footings poured by 1990s contractors heave upward, throwing sliding gates off their tracks and swing gates out of alignment by March.
- Obsolete operators without current safety features. Gates installed before modern UL 325 entrapment standards often lack functional photo-eyes or contact edge sensors. On a long private driveway off South Main Street, that’s a real risk, especially with kids and pets around.
- Welded repairs that were never done. Somebody quotes a bolt-on bracket where a weld was needed. Six months later the bracket cracks and the gate sags again. We weld on site, so the repair is part of the metal, not a bandage.
Pricing for Gate Installation in Sharon, MA
Here’s what we actually charge in Sharon. A single ornamental iron swing gate with new posts and hardware runs $2,800-$4,200. A sliding gate with a motorized operator lands between $4,500 and $7,500. Double driveway gates, which are common on larger Sharon lots, typically run $5,500-$9,500 including both operators and safety sensors. Pedestrian gates with new posts and self-closing hardware start around $950.
What moves the number: whether we’re saving your existing operator or installing new, how deep the frost line runs at your specific site (lakefront and wetland-adjacent lots need deeper footings), and whether the old posts are reusable or rotted through. We quote the price before any work starts. The number we give you is the number on the invoice. Estimates are free, and the $40-off-any-repair-over-$200 offer applies if the gate can be saved instead of replaced.
We Also Serve Cities Near Sharon
Most of our Sharon work comes from referrals in neighboring towns. We also install and repair gates in Stoughton, Canton, Foxborough, and Walpole, with the same upfront pricing and the same 90-Day Done Right Promise. If you’re calling from the line between Sharon and Canton, we’ll tell you straight which side of the line you’re on and make sure you get the right crew.
Serving Sharon, MA - Our Local Coverage Area
We’re based in the Sharon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Sharon
Cast-iron hinges and mounting plates in the lakefront neighborhoods commonly rust through in five to six years, about half the twelve-plus years you’d see in Foxborough or Canton. The evaporative moisture off the lake combines with road salt blown in off Massapoag Avenue to create a corrosive microclimate. If your hinge has visible flaking or rust blooms at the base, have it looked at before the post fails entirely. Call (877) 610-2993 for a free assessment.
Sometimes, but only if the board and terminals test clean. Older LiftMaster and DoorKing units can pair with a lighter aluminum gate if the motor’s draw stays within range, but many 1980s-era operators lack the photo-eyes and edge sensors required by modern UL 325 safety standards. Retrofitting an old operator onto a new gate often costs more than installing a new operator, and it leaves you without current entrapment protection. We’ll show you the numbers for both paths.
Gate post footings in Sharon need to sit below 48 inches, which is the local frost depth. Contractors in the 1990s often poured footings at 30 to 36 inches, and those posts heave upward every winter, especially on saturated soils near Lake Massapoag and the town’s mapped wetlands. We dig to 52 inches, pour a flared concrete base, and backfill with gravel so water drains away from the steel.
Never hang a new gate on a post that’s already failing. If the post is rusted through or out of plumb, the new gate inherits the old problem. We cut the post at the frost line, pour a new footing below frost depth, set a fresh steel post, and rehang. If the post tests solid and only the hinge plate is worn, we weld a new plate on site and stay repair-first. Show me the gate closing on its own, and I’ll show you where it’s failing.
Most gates installed before roughly 2016 do not meet current UL 325 entrapment standards. The common gaps: no functional photo-eye, no contact edge sensor, and no force-sensing reverse. On a long private driveway in Sharon with kids and delivery trucks coming and going, that’s enough to justify a safety upgrade even if the gate itself still looks fine. We can retrofit current sensors onto most existing operators, and we’ll quote that before any work begins. Call (877) 610-2993 for an honest answer, not a sales pitch.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sharon since 2001.