Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Selden
A new gate installation in Selden typically runs $1,100-$4,800 depending on the gate type, material, and whether you’re adding an operator. Most driveway swing gates with a basic operator land in the $2,800-$4,200 range here, while a manual pedestrian gate starts closer to $900. We schedule free measurements across Selden within a few days, and the price you’re quoted is the price on the invoice. Call (877) 610-2993 and a live person picks up.
We’ve worked on gates up and down Middle Country Road, through the quiet blocks off Boyle Road, and across the ranch-house streets around Hawkins Path. Selden’s housing stock has a personality of its own, mostly postwar Capes, ranches, and split-levels. That means most of the gate work here isn’t about flashy new builds. It’s about older fences, original posts, and hardware that’s been holding on for forty or fifty years.
Why Gatewood Fence & Gate Is Selden’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001 and his name is still on every invoice. That’s not branding. It’s accountability. When a Selden homeowner calls about a gate that won’t latch or a post that’s leaning, the person who answers the phone knows what a frost-heaved post looks like in Suffolk County soil. We’re not routing calls to some faraway office.
Selden customers get a straight answer about whether a gate can be fixed or should be replaced. We repair more gates than we install, and we’ll tell you honestly when a retrofit makes more sense than a new gate. Our standing offers apply everywhere we work, including Selden: no trip charge inside the county, a free second opinion on any written estimate, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. Background-checked, uniformed crew members show up in the window we give you. For Selden pool gates, we know the Town of Brookhaven code requirements cold, because we deal with them every spring.
Our Gate Installation Services in Selden
Driveway Gate Installation
A driveway gate in Selden usually means a swing gate across a modest suburban driveway, often with an automatic opener. We measure the width, check the hinge post condition, and recommend a gate that won’t sag under its own weight. Most Selden driveway gates run single-panel swing designs, which hold up better in our freeze-thaw cycles than heavier sliding models on small residential lots.
Pedestrian Gate Installation
Pedestrian gates are the most common pool-barrier gate we install in Selden. The Town of Brookhaven requires them to be self-closing and self-latching, and that means proper spring hinges or a hydraulic closer. We set posts below the frost line and use concrete footings sized for our sandy glacial outwash soil, which resists heaving better than shallow set posts.
Sliding Gate Installation
Sliding gates are less common on Selden’s quarter-acre lots, but some homeowners with wider driveways or side yards off Bicycle Path have them. We install cantilever and V-track sliding gates and retrofit worn rack-and-pinion systems when an old operator’s gears strip out. A sliding gate in Selden needs a level track bed, so we compact the base before laying rail to reduce frost movement.
Swing Gate Installation
Swing gates are the workhorse of Selden gate installation. Single and double swing gates fit the ranch and split-level driveway layouts we see throughout 11784. We weld on site, set posts in concrete, and hang gates with heavy-duty hinges rated for the panel weight. On the split-level off Blue Point Road, we replaced a rotted wood hinge post and hung a new swing gate with a LiftMaster operator, adding a safety photocell and keypad entry. The old post footing had heaved so badly the gate dragged and wouldn’t latch, and the homeowner needed it corrected before opening the pool that week.
Double Gate Installation
Double gates, sometimes called bi-parting gates, divide the weight across two panels instead of one. That’s often the right call for Selden driveways that open wide enough for a boat or camper. We set both hinge posts with matched elevation so the two leaves meet evenly in the center and the latch aligns without shimming.
Security Gate Installation
Security gates in Selden aren’t about high walls and cameras. They’re about a locking gate that actually keeps people out and a pedestrian gate that stays latched without fiddling. We install reinforced steel frames, locking latches, and optional keypad or intercom access. For homeowners near Middle Country Road traffic, a secure driveway gate also keeps kids and pets from wandering toward the road.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Selden
We’re certified to service nine major gate brands and we stock parts locally for Selden customers. FAAC and BFT operators are common on older Long Island installations, and we keep their control boards and limit switches on hand for retrofit work. Linear and Viking gear we see mostly on newer systems or security gates. If your existing operator is from one of these brands, we can often repair it on the spot rather than swapping in a whole new unit. When a legacy operator can’t be fixed, we’ll quote you the replacement before any work starts.
Common Gate Installation Problems We See in Selden Homes
- Rotted wooden posts from 1960s ranch homes. Original gate posts on Selden’s older properties are often pressure-treated 4x4s or cedar posts set in the 1960s and 1970s. After five decades of Long Island moisture, they shear at ground level and the whole gate collapses. That’s a full post replacement job, not a hinge adjustment.
- Worn rack and pinion on original slide gate operators. The gear teeth on older slide gate operators strip over time, especially after years of freeze-thaw cycles and sandy grit working into the track. You’ll hear a grinding sound and the gate will jerk instead of gliding. We retrofit the operator and replace the rack if needed.
- Frost-heaved post footings. Selden sits on sandy glacial outwash that drains fast but doesn’t grip posts as well as denser soil. Every winter the ground moves, and by March or April hinge posts have shifted out of plumb. Swing gates drag on the latch side or fail to self-latch, which is a code problem for pool barriers.
- Obsolete control boards on legacy operators. When a 1990s or early 2000s gate opener control board dies, replacement parts often aren’t manufactured anymore. That’s a full operator swap situation, and it’s one of the most common calls we get from Selden homeowners with original-spec automatic gates.
Pricing for Gate Installation in Selden, NY
Here’s what gate installation actually costs in Selden. A manual pedestrian gate with new posts and hardware runs roughly $900-$1,600. A single swing driveway gate with a basic operator lands between $2,800 and $4,200, depending on the panel material and whether we’re adding a keypad or intercom. Sliding gates start around $3,500 for residential setups. Double driveway gates run $4,200-$7,800 installed with operators. Security gates with reinforced frames and access control start at $3,200. Every price is quoted and agreed before work starts, and the quote doesn’t change at the door. Call (877) 610-2993 for an exact number. Estimates in Selden are free.
Learn more about our full Gate Installation services and what goes into each project.
We Also Serve Cities Near Selden
Our crew regularly works in Centereach, Coram, Farmingville, and Port Jefferson Station. If you’re in one of those towns with the same old gate or pool-compliance problem, the same live-answer phone number applies. Read more about Gate Installation in Selden or call (877) 610-2993.
Serving Selden, NY - Our Local Coverage Area
We’re based in the Selden area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Selden
Yes. We install pool barrier gates in Selden that meet Town of Brookhaven and NYS Residential Code requirements for self-closing, self-latching hardware. We know the pool gate spec cold because we deal with it every spring in Selden, and we set posts deep enough to hold against the frost heave that throws latches out of alignment. Call (877) 610-2993 for a free compliance check on your pool gate.
Most of the time in Selden, a heaved post means the concrete footing has shifted and you’ll need the post reset, not just a hinge tweak. Selden’s sandy glacial outwash soil moves more than people expect, and a hinge adjustment alone usually fails again next winter. We’ll tell you which one it is after we look at it, and the quote covers the fix in writing. Call (877) 610-2993 and we’ll come out.
In many Selden cases, yes, we can retrofit a modern operator onto an existing chain-link gate if the posts are still solid and the panel isn’t badly rusted. The operator mounts to the post and the panel needs to be plumb and square. If the post is rotted at the base, we replace the post first, then add the operator. Call (877) 610-2993 for an honest read on your specific gate.
Manual pool gates in Selden don’t need photocells, but automatic pool gates do. The Town of Brookhaven follows NYS code, which requires automatic gates serving a pool barrier to have an entrapment protection device, usually a photocell or reversing edge. If you’re adding an operator to a pool gate, we install the safety gear as part of the job. Call (877) 610-2993 if you’re unsure whether your pool gate is compliant.
Often yes. We replace rotted posts on Selden split-levels regularly and reuse the existing gate panel if the panel itself is still sound. We dig out the old footing, set a new pressure-treated or steel post in concrete, and re-hang the panel with new hinges. If the panel is also failing, we’ll show you why before recommending a new one. Call (877) 610-2993 for a free look at the post.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Selden and Suffolk County since 2001.