Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across San Pedro
Gate installation in San Pedro runs about $1,400 to $7,800 depending on whether we’re hanging a new driveway gate, retrofitting an old one, or wiring a marine-rated operator. Most jobs in the 90731 and 90732 zip codes take one to two days once materials arrive. If you’re calling from a bluff-side street near Point Fermin or up off Western Avenue, we already know the grade, the salt air, and what your old posts look like underneath. Call (877) 610-2993 and you’ll get a person on the line, not a voicemail.
Why San Pedro Homeowners Choose Gatewood Fence & Gate for Gate Installation
Hal Gatewood started this shop in 2001 and his name is still on the invoices. That matters in San Pedro because we keep coming back to the same streets, the same neighbors, the same salt-crusted hinges we saw three years ago. We’re not passing through. We publish our address and license number, and if you want to look Hal in the eye before signing anything, the shop is down the road.
San Pedro’s harbor air has a reputation among local trades. Diesel particulates off the Port of Los Angeles mix with ocean spray and hang over the peninsula year-round. Bare steel gate hardware rots inside one season. Standard operator circuit boards fail within two to three years. We plan for that on every install, not just when the estimate justifies an upsell. Sealed enclosures, stainless fasteners, and powder-coated frames are the default in 90731 and 90732, because that’s what the environment demands.
Our Gate Installation Services in San Pedro
Swing Gate Installation
Swing gates are the most common gate style on San Pedro’s residential blocks, especially on pre-war bungalows off Gaffey Street and post-war tract homes in the lowlands. We install single and double swing gates with enough hinge clearance for the steep driveway grades common on the western and southern bluffs. Hot-dipped galvanized post anchors go below the footing depth so drainage undercutting doesn’t lean the posts within a few winters.
Driveway Gate Installation
A driveway gate here does two jobs: it controls access and it tells the neighborhood who you are. San Pedro homes range from original Craftsman bungalows to 1960s ranchers, and we match the gate style to the house rather than bolting on whatever’s in the warehouse. Our Gate Installation team surveys the grade first, because an automatic driveway gate that can’t clear a sloped approach will bind on the operator and burn it out early.
Pedestrian Gate Installation
Pedestrian gates off the main driveway see constant use and little maintenance. We set them with post depths that account for San Pedro’s clay-heavy bluff soils, which shift enough to knock a shallow footing out of square inside two wet seasons. Hardware gets stainless or hot-dipped galvanized from day one. The price difference is small. The longevity difference near the harbor is measured in years.
Sliding Gate Installation
Sliding gates suit narrower lots where a swing arc would eat the parking space. In San Pedro’s port-adjacent neighborhoods, we see sliding gate tracks packed with harbor grit within months if the install didn’t include a sealed track channel and side shields. We set the rollers and track with clearance for debris and salt film, then we service the motors on the schedule the environment actually requires rather than the schedule a manual suggests.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service and Install in San Pedro
We’re certified on nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For San Pedro jobs we lean on FAAC and BFT for high-traffic swinging and sliding gates near the port, and Linear for residential operators with dependable sealed housings. Parts turnaround is fast because we run our own stock and weld on site. You won’t wait two weeks for a board to ship across the country.
Common Gate Installation Problems We See in San Pedro Homes
- Rotted wood hinge posts. The original posts on many pre-WWII homes near Point Fermin are buried shallow and never drained properly. We pull them, set steel or new pressure-treated posts below grade, and bolt the hinge plate through with galvanized anchors.
- Bare steel hinges and lock strikes corroding within one season. Harbor salt fog eats unprotected hardware fast. Every San Pedro install leaves our shop with stainless or hot-dipped galvanized hardware, not painted-over mild steel.
- Failed operator circuit boards and seized gears. Standard residential openers without sealed marine enclosures die in two to three years here. We see the pattern on repeat service calls in 90731 and 90732. The fix is an enclosure rated for salt exposure, installed correctly the first time.
- Swing gates out of square from drainage undercutting. Bluff-side driveways funnel runoff down slope and eat post footings. Gates start dragging, photocells misalign, and the operator overloads. We re-foot the posts below the scour depth and often move the drain path instead of just patching the post.
Pricing for Gate Installation in San Pedro, CA
A new single driveway swing gate with operator typically runs $2,800 to $5,500 in San Pedro, installed. Pedestrian gates run $1,200 to $2,400. Sliding gates, with track, operator, and safety edges, land between $4,000 and $7,800 depending on gate length and whether we’re cutting into existing asphalt or concrete. Retrofitting an old gate with a new marine-rated operator, new hinges, and safety photocells runs $1,400 to $2,800. The price is quoted and agreed before any work starts. We don’t change the number at the door. Call (877) 610-2993 for a free estimate; seniors and veterans get 10% off permanently, and there’s no trip charge inside the county.
We Also Serve Cities Near San Pedro
We work regularly in San Pedro and the surrounding South Bay, including Lomita, Torrance, Rancho Palos Verdes, and Rolling Hills Estates. The same crew, the same trucks, the same warranty. If you’re a few blocks outside city limits, you’re still close enough that we answer the call the same way.
Serving San Pedro, CA - Our Local Coverage Area
We’re based in the San Pedro area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in San Pedro
Yes, if you’re within about a mile of the coast or the port, you need a sealed, marine-rated operator housing. The salt fog and diesel particulates off the harbor corrode standard openers fast. We regularly replace circuit boards and seized gears in units that failed within two to three years. Call (877) 610-2993 and we’ll tell you which models hold up in your specific block, not just in the brochure.
Because the hinge post is corroding at the base and the fasteners are eating themselves. San Pedro’s harbor air attacks bare steel quickly, and once the post moves even slightly, the gate lever-arms the hinges until it sags. We fix the post footing first, then the hinge alignment, then the panel. Tightening the hinge screws alone won’t hold. If you’re noticing it now, call (877) 610-2993 before the post lets go completely.
Most old gates can be retrofitted if the post is sound and the panel isn’t rotted through. We install safety photocells, resized wiring, and a current-compliant operator even if the gate itself dates to the 1950s. When the post is rotted or the frame is corroding from inside, replacement is cheaper than chasing repairs. We’ll give you a straight answer and a written quote before work starts.
For bluff-side homes in San Pedro, we usually recommend FAAC or BFT for swing and sliding gates because their sealed enclosures stand up to persistent salt exposure better than unstained standard units. Linear is a solid mid-range option if the gate is sheltered from direct ocean wind. The operator matters less than the enclosure, and we spec both to match the exposure on your specific street. Call (877) 610-2993 and we’ll tell you what we’d put on our own gate.
You install a sealed track channel with side shields, oversized rollers with sealed bearings, and a motor enclosure rated for salt spray. Then you keep the track clear of the grit that blows off the port with every onshore wind. We set sliding gates in San Pedro with enough track clearance to shed debris instead of grinding it into paste. If your gate is already dragging, call (877) 610-2993 and we’ll free it up and re-seal it before the motor strains.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, installing and repairing gates across San Pedro since 2001.