Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Rancho Palos Verdes
Gate installation in Rancho Palos Verdes costs between $2,800 and $11,000 for most custom driveway gates, with double swing gates on hillside estates running $6,000 to $15,000 depending on size, automation, and what the ground is doing beneath your posts. We quote the price before any work starts, in writing, and you’ll never get a surprise invoice at the end. Hal Gatewood has been building and fixing gates on the Palos Verdes Peninsula long enough to know that a gate on Crest Road has different demands than one a mile inland in Torrance. Call (877) 610-2993 and you’ll get a live person, day or night.
Why Gatewood Fence & Gate Is Rancho Palos Verdes’s Preferred Gate Installation Company
Our Gate Installation crew knows the difference between a gate that’s sagging from worn hinges and one that’s racking because the hillside under it is moving. Around Portuguese Bend and Abalone Cove, that distinction is the whole ballgame. Homeowners in Rancho Palos Verdes tell us the same story again and again: another company quoted a fix without checking whether the posts were still plumb, and the gate was binding again before the invoice cleared. We start every RPV job with a level, not a parts catalog.
Hal’s name is on the shop and on every invoice. He has been owner-operated since 2001, and his address and license number are published for anyone to check. When you call about gate work in Rancho Palos Verdes, the person who shows up is background-checked, uniformed, and has welded more gates than most companies have replaced. We service nine major brands including Linear, Viking, and Ghost Controls, but what matters more is that we fix what can be fixed before recommending replacement. The 90-Day Done Right Promise is stamped in writing on every job: if it’s not done right, one call brings Hal back, no runaround.
Response time to Rancho Palos Verdes is usually same-day for repairs, and we answer the phone around the clock. No voicemail, no call center. You’ll talk to a person who knows what a sagging double gate on a bluff-top property means, because they’ve probably fixed one in your neighborhood this month.
Our Gate Installation Services in Rancho Palos Verdes
Most RPV estates carry custom ornamental ironwork that was fabricated decades ago, often by shops that don’t exist anymore. That’s why we weld on site and fabricate replacement sections in-house rather than telling you to order a whole new gate. Here’s what we install across Rancho Palos Verdes:
Driveway Gate Installation
Driveway gates in Rancho Palos Verdes are typically custom wrought-iron or tubular-steel swing gates on steep, terraced lots. Many sit on 1950s- to 1980s-era footings that were never designed for the weight they’re holding now, much less for the ground movement along the Portuguese Bend landslide complex. We size new posts, footings, and operators to actually carry the gate you have, not the gate the hardware store assumes you have.
Pedestrian Gate Installation
A pedestrian gate off to the side of the main driveway is common on Palos Verdes Drive South and Palos Verdes Drive East properties. These get overlooked until the latch won’t catch or the hinges seize from salt air. We install matched pedestrian gates that line up with your driveway gate’s style, and we set the latch hardware so it doesn’t work loose on a slope.
Sliding Gate Installation
Sliding gates are a good fit for some flatter RPV lots where a swing gate would need a huge apron to open. But the cantilever style demands a precise track setup, and the rolling wheels and track bearings take a beating from marine salt and fine dust off the bluffs. We install and align the track, set the motor for the gate’s true weight, and seal the rolling hardware so it doesn’t become a rusted mess in eighteen months.
Swing Gate Installation
Custom swing gates dominate the driveways off Crenshaw Boulevard and up through the hillside estates. A heavy double swing gate with ornamental scrollwork needs hinge posts set dead plumb, with enough footing mass to resist the lateral load, and operators that aren’t fighting a racked frame. We use laser levels on every post set, and in slide-affected corridors we’ll recommend helical piers or deeper footings so the gate keeps clearing the ground even as the bluff creeps.
Double Gate and Security Gate Installation
Double gates are the standard for wider driveways on larger lots, and most RPV homeowners want them paired with keypad entry, intercom, and often camera integration. We install the gate, the operator, the safety edges, and the access control as one system, not three separate subcontracts. Security gates on estate properties are usually heavy, ornate, and custom-fabricated. We treat them that way from the first measurement to the final weld.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rancho Palos Verdes
We’re certified to service and install nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Rancho Palos Verdes customers, that means we actually stock common parts for Linear and DoorKing operators locally and can turn around most repair-and-install jobs without waiting on a distributor. If you’ve got an aging Viking or Ghost Controls unit that’s struggling with a heavy gate, we’ll tell you honestly whether it’s worth rebuilding or should be replaced. We don’t push replacement for parts that still have life in them.
Common Gate Installation Problems We See in Rancho Palos Verdes Homes
- Posts tilting out of plumb from ground movement. On Portuguese Bend hillsides, the hinge post can lean an inch or more in a year. A gate that drags on the latch side usually isn’t sagging in the middle. It’s the post underneath it.
- Rusted hinge hardware and operator housings. The salt-laden marine air off the bluffs chews through cheap powder coating and untreated steel fast. We see seized hinges and corroded rack-and-pinion tracks on gates that are only a few years old but were installed with inland-grade hardware.
- Aging 1990s operators struggling with heavy gates. Many older RPV estates still run the original operator from the house’s era. Those units lack modern entrapment protection and tend to burn out under the strain of a gate that’s changed since they were installed.
- Gates that bind because the frame racked before installation. If a gate was built on uneven ground and hung on posts that were already leaning, the frame itself can twist. We re-square the frame or refit the hinges so the gate moves freely before we ever touch the motor.
Pricing for Gate Installation in Rancho Palos Verdes, CA
A standard single swing driveway gate in Rancho Palos Verdes runs $2,800 to $5,500 installed, depending on width, material, and whether we’re reusing existing posts or pouring new footings. Double swing gates on wider driveways typically fall between $6,000 and $15,000, especially when matched ornamental iron and automation are included. Pedestrian gates run $900 to $2,400. Underground operators, which many RPV estates prefer for their invisible clean lines, add $2,500 to $4,500 per operator and are common on custom hillside installations where surface-mounted arms look out of place against the ironwork. The exact price depends on what the survey finds: post condition, footing depth, access for equipment, and how much fabrication the gate requires. Every job gets a written quote before work starts, and estimates are free. We honor the price we write down. Call (877) 610-2993 to schedule a measurement.
We Also Serve Cities Near Rancho Palos Verdes
Our Gate Installation in Rancho Palos Verdes work regularly takes us down the hill into San Pedro and Lomita, and up through Rolling Hills Estates. We also cover the Torrance side of the Peninsula. The slide-zone and salt-air problems that shape an RPV gate install don’t stop at the city line, and we bring the same level and the same welded fix wherever the driveway leads.
Serving Rancho Palos Verdes, CA - Our Local Coverage Area
We’re based in the Rancho Palos Verdes area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Rancho Palos Verdes
Portuguese Bend sits on one of the most active landslide complexes in North America, and the ground under those hillside lots moves measurably year over year. That movement tilts post footings out of plumb, which throws the gate out of square and makes the hinges bind. In Torrance, the ground stays put, so a post that’s set once usually stays set. In the slide zones, we set posts with deeper footings, often on helical piers, and we still check plumb on every service call because a post that was perfect last year may be leaning this year. If your gate is dragging on the latch side, call (877) 610-2993 and we’ll put a level on it before quoting anything.
The salt-laden marine air accelerates rust on any unpainted or poorly sealed metal. Hinges seize, latch bolts corrode, motor housings pit, and rack-and-pinion tracks rust within a few years instead of a decade. For Rancho Palos Verdes homes, we use corrosion-resistant coating and marine-grade hardware on every install, and we seal wiring conduits properly. If your gate was installed with inland hardware, you’ll see it failing early. Call (877) 610-2993 and we’ll tell you honestly what’s worth treating and what needs replacing.
Yes, to a point. We design footings and post anchors that tolerate incremental movement without letting the gate bind. For properties in the active slide corridors, we often use reinforced footings with helical piers and build in adjustment points at the hinge plates so the gate can be re-trued without re-pouring the post. The gate can run quietly and square even on a shifting bluff if it’s set up that way from the start. Hal will walk the site himself before the install and tell you what your lot actually needs. Call (877) 610-2993 for a free site survey.
For custom ornamental gates, underground operators keep the driveway clean and the hardware out of sight, which fits the look of most estate properties. They also last longer in salt air because the housing is sealed below grade. The trade-off is that they cost more to install and need proper drainage around the pit. On hillside lots with active ground movement, we recommend specific models that tolerate minor post drift without stripping their gears. For high-end double swing gates in Rancho Palos Verdes, underground is often the right call. We’ll show you the numbers before you commit. Call (877) 610-2993 for a written quote.
The gate has to be built square and hung plumb from footings that can handle the load and the ground. We set the posts with laser leveling, fabricate the frame to the gate’s actual weight, use sealed hinge bearings instead of open barrel hinges, and size the operator with enough reserve torque that it’s not straining on every open. On Portuguese Bend hillside estates, we also account for gradual post movement so the gate doesn’t start scraping a year later. If it’s not running right under the 90-Day Done Right Promise, we come back and make it right. Start with a call to (877) 610-2993.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Rancho Palos Verdes since 2001.