Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Revere
Gate installation in Revere comes with conditions most gate companies never see until they’re already on site. Shared driveways between triple-deckers, salt air off Massachusetts Bay, frost heave that moves posts every winter. A driveway gate in Revere typically runs $2,800 to $7,500 installed, and a pedestrian gate $1,200 to $3,200, depending on width, material, and whether you need an operator. Sliding gates run higher than swing gates because the track, rollers, and motor all have to handle Revere’s tight side yards. If you’re wondering whether your lot can even fit a gate, call us at (877) 610-2993 and we’ll tell you straight. Hal Gatewood has been building and fixing gates since 2001, and he knows Revere’s lots better than most people know their own driveway.
Why Gatewood Fence & Gate Is Revere’s Preferred Gate Installation Company
We’re not a franchise and we don’t fly a crew in from some regional office. Hal Gatewood’s name is on the shop, and the person who shows up in Revere to measure your driveway is the same person you’ll see again if something needs attention. Our 90-Day Done Right Promise is in writing on every job. If a weld cracks or a gate binds, one call brings us back. No dispatch queue, no voicemail. A live person answers the phone around the clock, because gates fail at inconvenient hours and Revere homeowners shouldn’t have to wait until Monday to hear back from somebody.
Our Gate Installation team has worked driveways off Broadway, side yards near Revere Street, and beachfront properties where salt spray eats hardware in a season or two. We know which neighborhoods have triple-deckers with shared access, which have granite curb cuts that limit swing arc, and which have concrete piers poured before 1960 that need reinforcement before a new post goes in. That local knowledge is what keeps us from quoting one thing over the phone and discovering another thing at the door.
Revere homeowners call us because our estimate is the price. It’s quoted and agreed before any work starts, and it doesn’t change when we show up. We publish our address and license number. We stand behind every job. And if you ever want to look a gate contractor in the eye before signing anything, you can drive to the shop and find Hal there.
Our Gate Installation Services in Revere
Sliding Gate Installation
On Revere’s narrow side-yard lots, a sliding gate is usually the only option that works. When a swing gate arcs open, it sweeps across four to six feet of your driveway. On a shared driveway between two triple-deckers off Shirley Avenue or Park Avenue, that arc crosses the neighbor’s fence line or blocks their access. A sliding gate hugs the fence line and moves parallel to it, opening without carving into anyone else’s space. We install cantilever and track-style sliding gates with operators that handle Revere’s salt air, not just sunny-weather California conditions. Expect $3,500 to $8,000 for a complete sliding gate with operator, depending on width and material.
Driveway Gate Installation
Driveway gates in Revere have to contend with tight curb cuts, aging concrete piers, and winter road salt tracked up from Route 1A and Revere Beach Parkway. We start with the post, because a gate sags in the hinge post, not in the middle. Fix the panel without the post and you’ll fix it twice. We check what the existing pier is made of, whether it’s tied into the fence run, and whether frost has already started shifting it. Then we set new posts to a depth that survives a Boston winter. A single driveway gate in Revere runs $2,800 to $6,500 installed, including hardware rated for coastal exposure.
Pedestrian Gate Installation
The pedestrian gate is the one that gets used thirty times a day and rarely gets serviced until the latch fails. In Revere, that latch is fighting salt spray if you’re within a half-mile of Revere Beach Boulevard, and road salt all winter if you’re near the main streets. We install pedestrian gates with stainless or powder-coated hardware by default here, not as an upsell. A pedestrian gate with frame, hinges, latch, and installation typically runs $1,200 to $3,200 in Revere, depending on width and whether it ties into an existing fence.
Swing Gate Installation
Swing gates work in Revere when the driveway is wide enough to accommodate the arc and the hinge posts are solid. Most Revere driveways are not wide enough. We’ll tell you during the free measure whether a swing gate will work on your lot or whether a sliding gate is the only responsible option. If a swing gate does fit, we set the posts deep enough to resist frost heave and hang the gate so it doesn’t bind at the latch side. Single swing gates run $2,500 to $5,500 here. Double swing gates, where the driveway actually has the width, run $4,500 to $8,500.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Revere
We install and service gate operators from Linear, Viking, Ghost Controls, and DoorKing. The brand matters less than the installation, but for Revere’s salt-humid coastal air, some models hold up better than others. We stock common parts locally so a board replacement doesn’t mean waiting a week for a shipment. If a DoorKing operator in Revere fails, we’re not ordering from some warehouse four states away. We carry what we need to get you running again, and we know these systems well enough to diagnose a salt-corrosion failure before we even open the enclosure.
Common Gate Installation Problems We See in Revere Homes
- Salt-spray hinge and latch corrosion. Within a half-mile of Revere Beach, steel hinges and latches rust through in a few seasons. We use stainless or hot-dip galvanized hardware as standard, not as an option, because the ocean air here doesn’t take a season off.
- Frost heave pushing gate posts out of alignment. Revere’s freeze-thaw cycle moves shallow footings every winter. A post set at 30 inches will lean by spring. We dig to 42 inches or deeper, below the frost line, so the gate doesn’t bind or jump the track in January.
- Shared driveways and swing gate clearance. Triple-deckers with a common driveway usually can’t accommodate a swing gate at all. The swing arc crosses the neighbor’s access. We’ll look at the lot line, the fence, and the right of way before recommending anything.
- Salt-humid operator failures in newer condo buildings. The Revere Beach condo boom brought a lot of panelized sliding gate systems with control boards that corrode from the inside. We replace boards and seal enclosures the way they should have been sealed from day one.
Pricing for Gate Installation in Revere, MA
We Also Serve Cities Near Revere
We install gates across Revere and the surrounding communities. If you’re in Chelsea, Everett, Winthrop, or Malden, we’re close by and familiar with the same coastal conditions and tight lot geometry. Call us at (877) 610-2993 and we’ll schedule a free measure at your property.
Serving Revere, MA - Our Local Coverage Area
We’re based in the Revere area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Revere
Yes, and in most shared driveways in Revere, a sliding gate is the only gate that works. A swing gate arcs outward and crosses the neighbor’s fence line or blocks their access. A sliding gate runs parallel to the fence on a track, staying inside your property line. We installed a sliding gate on a shared driveway off Shirley Avenue where the swing arc would have crossed the neighbor’s fence line. Our crew set the gate operator with a rack and pinion drive and sealed the control board enclosure against salt-air intrusion, keeping vehicle and pedestrian access open during the whole job. Call (877) 610-2993 and we’ll tell you what your lot can actually support.
Use stainless or hot-dip galvanized hardware, powder-coated steel or aluminum panels, and a sealed operator enclosure from the start. Revere’s coastal salt spray is constant, not just during storms. Ferrous gate components without protective coatings can rust through in a few seasons. We spec coastal-rated hardware as standard on every Revere Beach Boulevard install, not as a line-item upgrade, because we know what happens when someone doesn’t. Call (877) 610-2993 for a free measure and we’ll show you exactly what materials your location needs.
Yes. The failures we see in those newer Revere Beach condo systems are internal control board corrosion from salt-humid air getting into enclosures that were never sealed for a coastal environment. We install operators with properly gasketed enclosures, apply dielectric grease on board connections where appropriate, and use sealed conduit for wiring. We service Linear, Viking, Ghost Controls, and DoorKing systems and know which models handle coastal exposure better than others. Call (877) 610-2993 for a free quote on a coastal-rated operator install.
No, and we won’t pretend otherwise. Revere’s freeze-thaw cycle will push a shallow post out of alignment every winter. Setting a new gate on the old footing means you’ll be calling us back in two years with a binding gate and a cracked weld at the base. We dig below the frost line, set the post in proper concrete, and only then hang the new gate. Fix the post before the panel, or you’ll fix it twice. Call (877) 610-2993 and we’ll inspect your existing footing and tell you what it actually needs.
Yes. Revere follows Massachusetts state building code, which requires entrapment protection on all automatic gate operators. That means safety edges, photo eyes, or both, depending on the gate type and application. We install every operator with compliant safety features as standard, and we test them before we leave. Anyone quoting you an automatic gate without entrapment protection is cutting a corner you don’t want cut. Call (877) 610-2993 for an install that meets code the first time.
Contact Gatewood Fence & Gate in Revere
If you’re in Revere and need a gate that actually fits your lot, holds up to salt air, and keeps working through New England winters, call us at (877) 610-2993. We’ll schedule a free measure, give you a written price before any work starts, and do the job right. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.