Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Piedmont
Gate installation in Piedmont means working with custom estate homes that were built to look a certain way, and the city’s design review process makes sure they stay that way. If you live in Piedmont, you likely already know that swapping an original wrought-iron driveway gate for a stock tubular steel panel will not get past the Planning and Building Department. That’s exactly where we start. Gatewood Fence & Gate has been installing, restoring, and welding gates since 2001, and we understand what Piedmont homeowners and Piedmont building staff expect before a single post hole is dug. Call (877) 610-2993 and you’ll talk to a live person who can tell you whether your gate should be restored or replaced, and what the city will want to see.
Why Gatewood Fence & Gate Is Piedmont’s Preferred Gate Installation Company
Hal Gatewood’s name is on the shop, and the shop is down the road. That is the oldest accountability there is, and it matters in a city of roughly 11,000 people where word travels fast. When we install a gate on a hillside lot off Wildwood Avenue or near Crocker Park, the homeowner knows exactly who did the work. We are not a faceless crew. Hal has been running this company since 2001, and when a gate we installed in Piedmont develops a problem, one call brings him back under the 90-Day Done Right Promise, stamped in writing on every job.
Our team knows Piedmont’s housing stock. The 1910s through 1940s Tudor Revivals, Spanish Colonials, and Craftsman estates that fill the city were built with ornamental iron and solid hardwood gates, not off-the-shelf panels. That means a technician showing up with a truck full of stock parts is useless to you. Our crew welds on site, fabricates missing scrollwork, and restores period hardware. We treat the gate like part of the house, because in Piedmont, that is exactly what it is.
Calls are answered by a live person 24/7. Not a voicemail, not a call center three states away. If your gate fails at 9 p.m., the person who answers will be able to tell you when we can get to your Piedmont address.
Our Gate Installation Services in Piedmont
Driveway Gate Installation
Driveway gates in Piedmont span the range from heavy custom iron double gates on brick pillars to modern sliding panels on steel tracks. We measure, fabricate what cannot be bought, and install with concrete footings rated for the hillside load. On a sloped driveway off Grand Avenue, the difference between a gate that works and one that fails mid-cycle is the operator and the hinge engineering. We size both to the exact grade.
Double Gate Installation
Double swing gates are common on Piedmont’s larger estates, often framed by original stone or brick pillars that have shifted over decades of hillside settlement. That shift is why latch strikes fail and gates sag. We re-plumb the hinge posts, weld reinforcements where the original builder relied on bolts, and hang both leaves so they meet cleanly. A double gate is only as good as its posts. Fix the panel without the post and you’ll fix it twice.
Sliding Gate Installation
Sliding gates make sense on Piedmont driveways where swing arcs would block a tight street or a steep grade. We install cantilever and track-style sliders with operators rated for slope use. Marine fog and salt air from the Bay are brutal on exposed track and rollers, so we specify sealed bearings and stainless hardware where a flatland Oakland job might use plated steel. It costs a little more and lasts years longer.
Swing Gate Installation
Most older Piedmont homes have swing gates, and most of them need help. We install new swing gates and restore the originals, matching period hinges, latches, and finials. When the hinge post is set in a shifting brick pillar, we dig the footing deep enough to reach stable ground and weld the post to a structural base. The gate closes square, the latch strikes clean, and the motor does not fight itself.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Piedmont
We are certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Piedmont homeowners, that means we can wire a Viking operator one day and retrofit a DoorKing the next without telling you to wait for parts. Specifically, we keep Linear and Ghost Controls components stocked because we see them on so many Piedmont estate gates. If you already have an operator and want to keep it, we will work with it. If it is undersized for your sloped driveway, we will tell you straight before you spend a dollar more.
Common Gate Installation Problems We See in Piedmont Homes
- Design-review denial on stock panels. A Piedmont homeowner calls us after another installer proposed a standard tubular steel panel and got shut down at the city. Piedmont treats gate replacement as an exterior modification subject to design review, so period character is required. We build to that standard from the first drawing.
- Hinge post rot and shift on brick or stone pillars. Decades of hillside settlement move pillars out of plumb, and once the post leans, the latch stops striking. We reset the post footing and weld the correction in place. Hardware swaps alone will not hold.
- Undersized operators stalling mid-cycle on slopes. Piedmont driveways routinely run at grades that flatland operators are not rated for. The motor overheats, trips the loop detector, and leaves the gate hanging halfway. We size operators to the actual load and grade, not the brochure.
- Fog and salt air rust on ornamental iron. The Bay’s marine layer condenses on metal gates every night, and older wrought iron is especially vulnerable. We strip, treat, and repaint with coatings meant for coastal exposure, then seal the hinge internals so the rust does not return in six months.
Pricing for Gate Installation in Piedmont, CA
A single pedestrian gate in Piedmont typically runs $1,200 to $3,800, depending on whether it is custom iron or a standard swing panel. Driveway gates run a broader range: a stock single swing gate starts around $2,500 to $5,000 installed, while a custom ornamental double gate with new footings, welding, and an operator can land between $8,000 and $25,000. Sliding gates on steep grades usually fall between $6,000 and $18,000 because the track, operator, and safety edges all have to be slope-rated. Every price is quoted in writing and agreed to before any work starts. If you bring us another company’s written estimate, we’ll give you a free second opinion. Call (877) 610-2993 for an exact quote.
We Also Serve Cities Near Piedmont
Our crews serve Piedmont and the surrounding East Bay, including Oakland, Emeryville, Berkeley, and Orinda. If you are in the neighborhood, our Gate Installation team can typically reach you quickly. For service in the wider area, see Piedmont as well. We schedule freely across the line because most of our Piedmont work comes from referrals in the hills.
Serving Piedmont, CA - Our Local Coverage Area
We’re based in the Piedmont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Piedmont
Yes. Piedmont’s Planning and Building Department treats gate replacement as an exterior modification subject to design-review approval, so a new ornamental driveway gate on a Tudor Revival home must match period character and will likely need staff or commission sign-off before installation. We prepare gate drawings and material specifications that align with what Piedmont’s building staff expects, which saves you a rejection cycle. Call (877) 610-2993 and we will walk you through the specific submittal path for your address.
Yes. We install sliding gates on sloped Piedmont driveways regularly, but the operator, track, and safety edges all have to be rated for the grade. A flatland operator will stall or trip the loop detector midway. We measure the actual grade, size the motor to the loaded gate weight, and set the track so the gate does not drift when power cuts. Call us for a site visit and a written price.
We restore them in place when possible. The fog that settles over Piedmont every night condenses on iron, and older wrought iron holds rust in the scroll joints. We strip the corrosion, treat the pitting, weld in replacement sections where the original has thinned, and repaint with a coastal-grade finish. The restoration keeps the period character the city wants to see and stops the rust from spreading. We will give you a free estimate for the specific condition of your gate.
Yes. Any new motorized gate in Piedmont must meet UL 325 entrapment-protection requirements, which means monitored safety edges or photocells and proper force settings. Piedmont’s building staff checks entrapment protection before final sign-off. We install entrapment protection on every motorized gate we build, including double swing gates, and we test it in front of you before we leave.
Because the combination of steep grades, heavy custom gates, and constant shade keeps moisture near the motor and forces it to work harder. The tree canopy slows evaporation, the fog adds salt, and a heavy ornamental gate on an incline puts continuous load on the drive. Operators sized for flat, open Oakland streets simply cannot hold up. We size the motor, weather-seal the housing, and use drives rated for continuous duty on grades. Call (877) 610-2993 for an exact quote, and we will tell you what your gate actually needs.
Get a Design-Review-Ready Gate Installation in Piedmont
If you live in Piedmont and you need a gate that matches the house, works on the grade, and passes the city’s review, call Gatewood Fence & Gate. Hal Gatewood has been doing this since 2001, and his name is on the shop. We will come out, measure, and give you a written price before any work starts. Estimates are free. Call (877) 610-2993 today.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Piedmont and the East Bay with gate installation, restoration, and welding.