Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Parkland, FL
Gate repair in Parkland, FL typically runs $180 to $340 for common fixes like sensor realignment, hinge replacement, or limit switch adjustment. Motor and opener replacement lands between $450 and $1,100 depending on brand and horsepower. Structural welding and post repair work usually falls between $250 and $600. Every price is quoted and agreed in writing before any work starts. Call (877) 610-2993 and a live person answers, day or night.
Parkland is different from most Broward County cities because nearly every home sits behind a gate. The master-planned communities built in the 1990s and 2000s came with perimeter gates and individual driveway gates as standard, not upgrades. Those operators are now hitting their 20 to 25 year end-of-life window at the same time, which means a wave of circuit board failures, worn actuators, and corroded hinge posts across the 33067 zip code. The work here is not occasional. It is constant.
Why Parkland Homes Are Different
Parkland’s housing stock is dominated by Mediterranean-style stucco homes built in a concentrated 1990s to 2000s development boom, and virtually every community came with a perimeter gate system plus individual driveway gates. That means thousands of gate operators installed within the same decade are now aging out together. A neighborhood that had no gate failures for fifteen years will suddenly see a dozen in one season. It is not bad luck. It is equipment hitting its lifespan at the same moment.
The climate compounds it. South Florida’s year-round humidity creeps into control boxes and eats at solder joints and relays. UV exposure bakes the plastic housings on photocells and degrades wire insulation faster than in drier climates. The rainy season leaves post footings and hinge hardware sitting in standing water for months, accelerating corrosion. Then hurricane season arrives and forces repeated emergency gate lockdowns, which stress aging actuators and crack welds at motor mounts. By September, gates across Parkland fail in clusters.
On top of that, HOA architectural review boards control nearly every gate in this city. Any structural repair, operator swap, or finish change typically requires written approval, and that process runs two to four weeks. Contractors who do not provide spec sheets and finish swatches at the estimate stage lose weeks of delay. We do.
Gate Repair in Parkland
Gate repair in Parkland tends to split into two jobs: the perimeter gate your HOA won’t let you modify without written approval, and the driveway gate you use every day. Both matter, and both fail in predictable ways here. Most of the gate operators installed across Parkland’s master-planned communities during the 1990s and 2000s buildout are now hitting the 20 to 25 year mark simultaneously. Circuit boards that worked fine for two decades quit after storms. Hinge posts that looked solid on the surface are rotting below grade from standing water. We handle the full range of gate repair work, and we do it with the gate in your driveway, not hauled off to a shop.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. That is where we start. In Parkland, where the rainy season leaves post footings sitting in standing water for months at a stretch, we see hinge posts that look fine on the surface but are rotting or corroding at the base. This work typically runs $300 to $750 on a standard gate, and more on heavy slide gates or posts that need full concrete work. We weld on site, which means we don’t haul your gate off and leave your driveway open for a week. We fix the post, re-hang the gate, and it closes true the same day.
Electric Gate Repair
Electric gate repair in Parkland usually traces back to one of three culprits: a circuit board that took a surge during a lightning storm, a photocell that’s misaligned or sun-baked, or an actuator that’s been cycled too many times during hurricane lockdowns. We service all of it. Electric gate repair, including a circuit board replacement or photocell swap, usually falls between $225 and $480. If the board can be repaired, we repair it. If it’s fried beyond salvage, we replace it with a unit matched to your gate’s actual weight and cycle count, not whatever the supply house had on the shelf.
Gate Realignment
Gates come out of alignment for a lot of reasons: settling soil, a bumped post, a hinge that’s slowly ovaled out over years of use. A misaligned gate grinds against the operator, drags on the track, and eventually kills the motor. A basic gate realignment on a residential driveway swing gate typically runs $175 to $325, depending on whether hinge shims or post adjustments are needed. We check the post, the hinge pins, the operator mount, and the ground clearance before we touch a single bolt. Fix the panel without the post and you’ll fix it twice.
Can you repair a sagging swing gate without replacing the entire gate?
Almost always, yes. A sagging gate is usually a hinge problem or a post problem, not a gate problem. If the hinge pins are worn, we replace them. If the post has shifted, we reset or reinforce it. If the weld at the hinge mount has cracked, we weld it on site with the gate still hung. Replacement is only necessary when the panel itself is structurally gone. Call (877) 610-2993 for an honest assessment.
Does my Parkland HOA need to approve a gate repair before work starts?
For most repairs, no. Replacing a circuit board, a hinge, a photocell, or a worn gear is maintenance, not modification, and HOAs generally don’t require approval for that. Structural repairs or replacements that change the gate’s appearance, size, motor model, or finish almost always require written board approval, and Parkland architectural committees typically review for two to four weeks. We provide committee-ready documentation at the estimate stage so the clock starts running on day one.
Gate Installation in Parkland
Gate installation in Parkland runs from $2,400 to $8,500 installed, depending on whether it’s a single swing, a sliding driveway gate, or a double gate with an operator. Most installations take two to four days from permit-ready proposal to final walkthrough. If you’re calling from the 33067 side of town, we can usually be at your property within 48 hours to measure and hand you a written number. That number will not change at the door. For a full look at the gate installation process, see the hub page.
Driveway Gate Installation
A driveway gate in Parkland usually runs $3,200 to $7,500 installed, depending on width, material, and whether you’re adding an operator. Most homes along the canal-lined streets off Nob Hill Road need a gate wide enough for a full-size pickup or SUV to clear without a second thought. We measure for that, and we set the posts deep enough that the gate won’t sag into the gap in two years. A gate sags in the hinge post, not in the middle, and that is where we start.
Sliding Gate Installation
Sliding gates in Parkland run $3,800 to $8,500 installed. These are common on the ranch properties along the northwest equestrian corridor, where a gate has to clear a horse trailer and the driveway is long enough that swinging a gate open isn’t practical. Sliding gates need a level track, a properly sized operator, and a roller system that won’t bind when summer storms dump standing water on the track for weeks. We size the motor for the gate’s cycle count, not just its weight, because an equestrian gate opens and closes far more often than a standard driveway gate.
Pedestrian Gate Installation
Pedestrian gates run $900 to $2,600 in Parkland. These are the walk gates next to a driveway gate or along a side yard. The humidity out here rusts hardware faster than people expect, so we use hinges and latches rated for wet, salt-adjacent air rather than the cheapest option from the box store. If you’ve got a pool on the property, we’ll make sure the gate self-closes and latches properly. That’s a code requirement in Florida, and we don’t skip it.
What does a full gate installation in Parkland include?
A full installation includes the gate, posts, hardware, the operator if you’re adding one, electrical hookup, and safety edges as required. For swing gates, it includes the hinge posts and any concrete work. For sliding gates, it includes the track, rollers, and end stops. We walk the site with you before work begins so there are no surprises on install day. Call (877) 610-2993 for a written quote.
Do you work inside gated communities in Parkland?
Yes. We install gates inside Parkland’s gated communities regularly. We coordinate with guardhouses, property managers, and HOA boards as needed. If your community has a perimeter gate that needs replacing, we provide the spec package your architectural committee will require: material specs, motor model sheets, and finish color swatches, all at the estimate stage.
Gate Motor & Opener in Parkland
When a gate motor fails in Parkland, it rarely happens at a convenient moment. The operator that opened smoothly for fifteen years suddenly grinds, hums without moving, or sits dead after an afternoon thunderstorm rolled through 33067. You need someone who knows these communities, shows up when promised, and fixes the motor rather than selling a full gate replacement you don’t need. For the full scope of gate motor and opener work we handle, see the hub page.
Motor Repair
Most gate motor failures in Parkland trace back to three culprits: humidity corroding the circuit board, UV degradation eating the sensor wiring insulation, or the operator being undersized for a heavy iron gate. A standard gate motor repair in Parkland typically runs $180 to $340, covering the service call, diagnosis, and most common parts like capacitors, limit switches, and remote receiver units. We repair what’s repairable. If the control board has a bad relay, we replace the relay. If the limit switch is out, we swap the switch.
Motor Installation
Motor replacement with a new operator lands between $850 and $1,900 for residential swing gates depending on weight capacity and brand. In Parkland, a motor install often means working with an HOA committee that wants spec sheets, motor model numbers, and finish color swatches before they’ll stamp approval. We prepare that documentation at the estimate stage because we know a job can stall for two to four weeks waiting on board review. We size the operator to the gate’s weight and duty cycle, not whatever’s on clearance at the supply house.
Slide Motor
A slide operator for a community perimeter gate off Nob Hill Road or near the Parkland Golf & Country Club starts around $1,500 and can reach $3,200 for heavier commercial-duty units. Slide gate motors in Parkland take a beating during hurricane season, when communities lock their perimeter gates down and run them through extra open-close cycles. After a storm, we see track fouling from debris, bent wheels, and actuator stress. We weld on site when a track section or post bracket needs repair, which keeps a community gate back in service the same day whenever possible.
Can you come out the same day if my community gate is stuck open?
For a stuck-open perimeter gate, yes. We treat that as an emergency because an open community gate in Parkland is a security problem for every house behind it. Call (877) 610-2993 and tell whoever answers that the gate is stuck open and where. We’ll be on it fast, usually the same morning or afternoon.
What warranty comes with a gate motor repair in Parkland?
Every repair and installation carries the 90-Day Done Right Promise in writing, and that covers Parkland jobs the same as anywhere else we work. If something isn’t right, you call and Hal comes back. No extended-warranty upsell, no claim forms. Call (877) 610-2993 for a free estimate and you’ll have the price before the work begins.
Gate Access Control in Parkland
Gate access control in Parkland means keypads, phone entry, card readers, video intercoms, and smart access systems that keep community entrances and driveway gates working. Most of the systems we service in this city were installed between 1995 and 2005, which means the operators, circuit boards, and wiring are now reaching end-of-life together. For a full rundown of gate access control services, see the hub page.
Keypad Entry
A keypad gate entry system in Parkland usually fails one of two ways: the membrane delaminates from humidity and UV exposure, or the circuit board inside corrodes after four or five rainy seasons. Pricing for keypad entry repair in Parkland typically runs $180 to $650. Full keypad replacement with a stainless-steel housing runs $750 to $1,400. We quote that price before work starts, and the 90-Day Done Right Promise applies to every keypad we touch.
Phone Entry
Phone entry systems at Parkland community gates let visitors dial a home or a guard station to get buzzed in. When the phone entry board shorts out after a storm, guests sit at the call box and the phone never rings. Phone entry repair in Parkland runs $250 to $900. Upgrading an analog phone entry system to cellular typically runs $900 to $1,800. We replace the board, upgrade to cellular if the landline was cut, and reroute calls to whatever number the resident wants.
Card Reader
Card readers on Parkland HOA gates wear out from repetitive use and South Florida humidity. The reader stops recognizing cards, or the wire to the controller corrodes inside the conduit. Card reader replacement in Parkland runs $300 to $850 per lane. Multi-lane community entrances are priced per reader, and we provide the HOA with a written line-item estimate before pulling a permit or replacing hardware.
Can you upgrade a 1990s community gate to a smartphone video intercom without replacing the whole gate?
Yes. In most cases, we can add a smart access controller and a video intercom module to the existing operator and pedestal without replacing the gate panel or the post. We’ve done this on Viking and DoorKing systems throughout Parkland’s 1990s communities. The upgrade typically runs $1,200 to $2,800 and gives residents smartphone-based entry, video calling, and access logs the HOA can review.
Why did my gate keypad stop working after a heavy rain in Parkland?
Water got inside the keypad housing and either shorted the board or corroded the contacts. Parkland’s rainy season saturates the air and ground for months, and 1990s-era keypad housings weren’t sealed well against that kind of exposure. We replace the board, reseal the housing, and in most cases can have the keypad working the same day. Expect to pay $180 to $450 for a typical keypad repair.
Gate Parts & Welding in Parkland
Most gate companies in Parkland want to sell you a new gate. We’d rather weld the one you have. Hinge replacement in Parkland typically runs $220 to $480 per hinge, post replacement $380 to $900 depending on the footing, and custom welding $150 to $350 for most crack and bracket repairs. For the full scope of gate parts and welding work, see the hub page.
Hinge Replacement
Hinge replacement in Parkland runs $220 to $480 per hinge, and the cost depends on what’s behind the stucco. On a 1990s Mediterranean-style estate in the 33067 corridor, the hinge post is often embedded in a stucco column that hides years of water intrusion. We don’t just swap the hinge. We open the stucco, inspect the post, replace or reinforce it if it’s rotted, then match the original finish so the HOA committee signs off without a fight.
Post Replacement
Post replacement in Parkland runs $380 to $900 depending on footing depth, concrete condition, and whether the post carries a motor mount. We see this constantly in the northwest equestrian corridor, where ranch gates built for horse trailers carry more weight than the original installers calculated. Fix the panel without the post and you’ll fix it twice. We set the new post in concrete rated for South Florida’s wet season, and we don’t leave until the gate swings true.
Rail Repair
Rail repair typically runs $180 to $450 in Parkland. Hurricane lockdown cycles stress the rack and pinion drives on slide gates across the city’s communities, and hairline cracks become full splits when the next storm forces another emergency close. We weld the rail in place, on site, rather than hauling the gate off to a shop. The gate stays in your driveway, the repair happens same-day in most cases, and the weld is ground smooth and painted to match.
Does Parkland require HOA approval before I can replace a gate hinge or weld a cracked rail?
Yes, in almost every case. Parkland’s HOA architectural review boards must approve any gate modification or structural repair before work begins, and that applies to hinge replacements and welded rail repairs, not just full gate swaps. The process typically runs two to four weeks. We provide committee-ready documentation with every estimate so the board can approve without delay.
Why did my gate start sagging again after the panel was repaired?
Because the panel wasn’t the problem. A gate sags in the hinge post, not in the middle. If a previous company straightened or replaced the panel without addressing the hinge post, the sag returned as soon as the post settled again. In Parkland, where rainy-season water sits against post footings for months, the post below grade is usually rotted even if the visible portion looks fine. We start at the post.
Brands We Service in Parkland
We service and stock parts for Linear, Viking, Ghost Controls, and DoorKing operators in Parkland, along with five other major brands. Local parts inventory means most repairs don’t wait on a shipment. See our brands for the full list and what we keep on the truck.
Pricing for Gate Repair in Parkland, FL
| Service | Typical Range in Parkland |
|---|---|
| Gate realignment | $175 - $325 |
| Electric gate repair | $225 - $480 |
| Hinge & post repair | $300 - $750 |
| Gate motor repair | $180 - $340 |
| Motor replacement | $850 - $1,900 |
| Slide operator replacement | $1,500 - $3,200 |
| Keypad entry repair | $180 - $650 |
| Phone entry repair | $250 - $900 |
| Card reader replacement | $300 - $850 |
| Hinge replacement (per hinge) | $220 - $480 |
| Post replacement | $380 - $900 |
| Custom welding | $150 - $350 |
What pushes the price up in Parkland is usually the HOA approval package, stucco work around posts, and whether the original 1990s conduit and wiring is still sound. Every price is quoted and agreed in writing before any work starts, and that number does not move at the door.
Neighborhoods We Serve in Parkland
We work all over Parkland, 33067, from the gated communities off Nob Hill Road to the equestrian properties along the northwest corridor. Our typical response window for gate repair calls in Parkland is same day, with live phone answering 24 hours a day, 7 days a week.
- Heron Bay
- Pine Tree Estates
- Parkland Golf & Country Club
- Tall Pines
- Ranches at Parkland
Service Area - Cities Near Parkland
We serve Parkland, FL and the surrounding Broward County communities. If you’re in Coral Springs, FL, Sandalfoot Cove, FL, Margate, FL, Pompano Beach, FL, or Coconut Creek, FL, the same crew and the same 90-Day Done Right Promise apply. Call (877) 610-2993 and a live person will tell you when we can be there.
Serving Parkland, FL - Our Local Coverage Area
Gatewood Fence & Gate crews serve Parkland and the communities around it; dispatch is coordinated from our Miami (South FL) office. The map shows the Parkland coverage area; if your address is on it, we can help.
Also serving nearby: Parkland, FL, Coral Springs, FL, Sandalfoot Cove, FL, Margate, FL, Pompano Beach, FL, Coconut Creek, FL.
FAQs About Gate Repair in Parkland
We can usually be at a Parkland property within 48 hours to measure and quote. Emergency repair calls are often same-day depending on where you are in the 33067 zip code. Call (877) 610-2993 and a person will tell you a window, not a script.
Yes. Pricing here runs about the same as Coral Springs or Margate because labor rates and parts costs don’t change at the county line. The wildcard in Parkland is HOA requirements, which can add specific finishes or materials. We’ll tell you the base number and any HOA-related additions separately before you commit.
We provide the documentation your architectural committee needs: material specs, motor model sheets, and finish color swatches at the estimate stage. For repairs that don’t change the gate’s appearance or structure, no HOA approval is typically required. For structural work, we hand you a committee-ready packet on day one so the review window starts immediately.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Parkland Customers Say
"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath