Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Parkland
Gate repair in Parkland usually costs $180-$750 depending on whether we’re fixing a hinge post, a circuit board, or an underground operator, and we can typically have someone at your driveway inside of two hours for urgent failures. If you live in Parkland, you already know the gate is not optional. It’s the first line of security for your property, and when it won’t open, won’t close, or makes a sound like a garbage disposal full of quarters, you need a name you can verify, not a rotating cast from a national outfit. Hal Gatewood founded Gatewood Fence & Gate in 2001, and he still answers the phone himself. Call (877) 610-2993 and tell us what your gate is doing. We’ll tell you straight what it’ll take to fix it.
We work across every gated community in the 33067 zip code, from the perimeter entrances on Holmberg Road to the estate driveways off Loxahatchee Road. Half the calls we take out here start the same way: someone came out, quoted a full replacement, and Hal finds a $40 hinge or a corroded wire that fixes the whole thing. That’s the difference between a crew that welds on site and one that swaps parts until the problem goes away. We’d rather fix your gate than sell you a new one.
If you need service in Parkland specifically, here’s what matters. We coordinate dispatch and scheduling from our South Florida office in Miami, and crews serve Parkland locally, so you get the same live-answer phone line whether it’s 2 p.m. or 2 a.m. No voicemail. No third-party scheduler. You call, a person picks up, and one of our background-checked, uniformed techs gets your address and heads out.
Why Gatewood Fence & Gate Is Parkland’s Preferred Gate Repair Company
The name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Hal Gatewood has been doing this since 2001, and he’s still owner-operated, which means he’s the one who stands behind the work when a follow-up call comes in. We don’t hide behind a brand. We publish our address. We put our license number where anyone can look it up. And we stamp the 90-Day Done Right Promise in writing on every single job, not buried in fine print at the bottom of an invoice. If it’s not done right, we make it right. One call brings Hal back. No runaround.
Parkland customers tend to ask the same three questions before they let anyone touch their gate. Who’s actually showing up? What’s the real price? And will you answer if something goes wrong after the check clears? Fair questions. Here are straight answers. The person who shows up is a background-checked, uniformed tech who works under Hal’s name and his warranty. The price is quoted and agreed before any work starts, and it doesn’t change at the door. And yes, we answer. We answer at midnight when an HOA board president is calling about a hurricane lockdown. We answer on Saturday when a homeowner finds their estate gate stuck half-open. A live person answers every call, 24 hours a day, 7 days a week. That’s not a marketing line. That’s how Hal set the shop up.
Honestly, the part of this job that fires Hal up is finding sloppy work somebody left behind. We’ve lost count of how many Parkland gates we’ve opened up to find mismatched bolts, a panel that’s been shimmed with wood blocks, or an operator board that was never properly grounded. A gate sags in the hinge post, not in the middle, and that’s where we start. Fix the panel without the post and you’ll fix it twice. We’d rather do it once.
Our Gate Repair Services in Parkland
Electric Gate Repair
Electric gates in Parkland run hard. Community perimeter gates cycle dozens of times a day, and estate driveway gates sit in South Florida humidity that never gives up. When an electric gate fails here, it’s usually one of four things: a control board that’s been cooking in its own heat, a capacitor that died quietly, a photocell sensor that’s fouled with debris, or wiring insulation that the UV has turned brittle. We troubleshoot the whole loop, not just the obvious part. If your gate opens but won’t close, or closes but won’t open, or trips the entrapment protection for no visible reason, call (877) 610-2993. We’ll diagnose it in your driveway and quote the repair before we touch a tool.
Automatic Gate Repair
Automatic gate repair in Parkland covers everything from slide operators on HOA perimeter entrances to swing operators on private estate driveways. The 1990s and early 2000s builders who put in most of Parkland’s gated infrastructure used operators that are now hitting their 20 to 25 year end-of-life window all at once. That’s why we’re seeing so many Parkland calls for intermittent failures, slow operation, and gates that stop halfway through their cycle. We service all the majors: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If we stock the part, we can usually have you running same day. If it’s a control board we have to order, we’ll tell you that upfront and give you a real timeline, not a vague “we’ll call you.”
Hinge & Post Repair
Hinge and post repair is the work other companies avoid because it’s heavy, dirty, and doesn’t involve selling a new gate. It’s also the most common repair we do in Parkland. The problem usually starts down in the footing, where standing rainwater saturates the concrete around the post and the steel starts to rot. By the time you notice the gate sagging, the post is often the root cause. We excavate, set new galvanized footings where needed, and rebuild hinge assemblies with hardware sized for the actual weight of the gate, not whatever was on the shelf. Our crew welds on site, so your gate stays in your driveway. We don’t haul it to a shop. We fix it where it hangs.
Gate Realignment
A gate that scrapes the ground, binds against the post, or sits crooked in its frame is a gate that’s working itself to death. Realignment in Parkland matters more than people realize, because so many of our community gates are heavy ornamental steel or wrought iron from the 1990s and 2000s Mediterranean-style builds. Those gates weigh hundreds of pounds. When they’re out of true, the operator works harder, the hinges wear faster, and the track or pivot points fail sooner. We bring the gate back to factory tolerance and then set the operator and safety edges to match. The gate should run silently. If it doesn’t, something’s still wrong, and we don’t leave until it’s right.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Parkland
We’re certified to service nine major gate brands, and around Parkland we see a lot of Linear and DoorKing on community perimeter gates, plus Viking and Ghost Controls on custom estate driveways. Because we work these neighborhoods week after week, we stock the common parts locally for Parkland customers, so a bad control board or a stripped gear doesn’t have to mean waiting on a freight truck. We also carry a range of weld-in hinge fixtures, rack sections, and loop detector wire for the slide gates that dominate Parkland’s community entrances. If we have it on the truck, we’ll tell you. If we don’t, we’ll tell you that too.
Common Gate Repair Problems We See in Parkland Homes
- Corroded post footings from rainy-season standing water. Parkland sits on flat, low country, and the summer rains leave post footings soaked for months. Steel rots from the bottom up, and the gate starts sagging even though the panel looks fine. We see it on 1990s-era community perimeter gates all over the 33067 zip code.
- Photocell faults that only show up in humidity. South Florida’s year-round moisture creeps into sensor housings and control board connectors, causing random entrapment reversals and gates that stop mid-cycle. We’ll often find green corrosion on terminals that test fine when dry.
- Hurricane lockdown damage on older slide operators. When a storm warning forces repeated emergency open and close cycles, nylon rack and pinion teeth on aging operators strip out. Community entrances get jammed exactly when HOA boards need access restored immediately. We keep rack sections and drive gears on hand for this reason.
- HOA approval gaps that leave gates stuck for weeks. Crews that treat Parkland like a standard residential call show up without the spec sheets and written proposals the architectural review board requires. That stalls the repair for two to four weeks while paperwork gets sorted. We know the process and we arrive with committee-ready documentation at the estimate stage.
Pricing for Gate Repair in Parkland, FL
Let’s talk real numbers, because you should know what to expect before someone shows up. A hinge and post repair in Parkland typically runs $350-$750, depending on how deep the footing damage goes and whether we’re setting new galvanized posts. Gate realignment usually lands in the $180-$400 range, less if it’s a simple track adjustment and more if the gate has to be unbolted and re-hung. Electric gate repair spans $220-$650 for control board replacement, sensor swaps, and wiring repair. A full slide operator replacement, which is common on the aging community perimeter gates out here, runs $1,500-$3,200 including operator, rack, safety edges, and programming. Every quote is written, itemized, and agreed before we start. We don’t do surprise invoices. And remember the standing offers: $40 off any repair over $200, a free second opinion on any written estimate you’ve gotten from another company, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Parkland
If you’re just outside the Parkland city limits, we’ve got you covered too. Our Gate Repair team works regularly in nearby Parkland neighbors including Coral Springs, Sandalfoot Cove, Margate, and Pompano Beach. Same live-answer phone line, same written pricing, same 90-Day Done Right Promise. If your gate is giving you trouble and you’re anywhere in northwest Broward, call us.
Serving Parkland, FL - Our Local Coverage Area
We’re based in the Parkland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Parkland
The HOA architectural review board usually requires a written proposal with spec sheets before any gate replacement or structural repair is approved, and that review typically runs two to four weeks. That’s not something we can shortcut, but it is something we can plan for. We provide committee-ready documentation packages at the estimate stage, including material specs, motor model sheets, and finish color swatches, so the review doesn’t stall out because a form was missing. If your gate failure is a safety or emergency issue, we can often complete a temporary stabilization while the approval moves through, then finish the full repair once the board signs off. Call (877) 610-2993 and we’ll explain exactly what your particular HOA is likely to require.
Almost never. A swinging gate sags because the hinge post has shifted or the footing has rotted, not because the gate panel itself has failed. We prove this constantly in Parkland neighborhoods, including a custom ornamental swing gate we recently rebuilt off Holmberg Road in 33067. The LiftMaster operator kept faulting on rainy afternoons, and the homeowner had been told the panel was done. We excavated the post, set a new galvanized footing, and realigned the gate to factory tolerance, then reprogrammed the loop detector and safety photocells. The gate is still the original panel, and it runs silent. Call us before you buy a gate. We’ll give you a straight answer on whether your panel is truly shot or the post just needs a foundation that holds.
Rain-triggered entrapment protection faults in Parkland are almost always a moisture intrusion problem, not a mechanical one. South Florida’s humidity and daily summer storms get into photocell housings, loop detector conduits, and control board terminals, and the system reads the moisture as an obstruction. We trace the circuit, clean and seal the affected connection points, replace any sensor that’s already corroded, and in some cases relocate the photocells to a better drainage position. The fix is usually quick and cheap once you’ve found the actual wiring fault. If your gate has started stopping or reversing on rainy days, call (877) 610-2993 and we’ll track it down.
Yes, and we’re one of the few crews in northwest Broward that handles them well. Underground operators sit in a sealed box below driveway grade, and when they fail, the gate won’t move at all, because the motor is completely hidden. We pull the unit, diagnose whether it’s the hydraulic pump, motor windings, or a seal leak that let groundwater in, and quote the repair or replacement in writing. Because we weld and fabricate on site, we can also modify the mounting plate if the original operator is no longer available. For underground operators, the quote is always agreed before we start, and the 90-Day Done Right Promise applies exactly the same as it does on any other job. That’s the deal.
If a slide gate on a Parkland community perimeter is jammed after hurricane lockdown cycles and the HOA board needs access restored, we treat that as an emergency and we move on it immediately. Our live-answer line takes the call any hour. Depending on what’s failed, we can often have the gate moving again same day by replacing stripped nylon rack sections, resetting the operator’s limit switches, or bypassing a shorted loop detector until a proper replacement arrives. The full repair gets quoted and scheduled in writing. If your community gate is stuck right now, call (877) 610-2993 and we’ll get someone headed your way.
Call Gatewood Fence & Gate for Gate Repair in Parkland
You can drive to the shop and look us in the eye. That’s the whole point. Parkland’s gates are heavy, custom, and expensive to replace, and the people who service them should be local enough to care and skilled enough to fix the root cause instead of throwing parts at the symptom. Hal Gatewood has been at this since 2001, the warranty is written on every job, and the phone is answered by a person, not a robot. If your gate is sagging, faulting, stuck, or just not running like it used to, call (877) 610-2993 for a free estimate. You’ll get a straight answer, a written price, and a name you can hold accountable. That’s how we’ve done it for over 29 years serving local communities, and that’s how we’ll do it for you.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Parkland and northwest Broward County with on-site welding and repair-first gate service.