Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Paramount
Gate installation in Paramount typically runs $1,800 to $6,500 depending on whether you need a residential driveway gate, a pedestrian gate, or a commercial sliding system along the Rosecrans corridor. Most residential jobs in the 90723 ZIP are completed in one to two days once posts are set and concrete has cured. We’re Gatewood Fence & Gate, and Hal Gatewood has been running this shop since 2001. If you’re on a shared driveway off Somerset Boulevard or a tight lot wedged between a warehouse and a postwar bungalow, we know the drill. Call (877) 610-2993 and you’ll get a live person who can talk through your site before we ever step foot on it.
Why Gatewood Fence & Gate Is Paramount’s Preferred Gate Installation Company
Paramount isn’t Bellflower or Lakewood. The residential streets run straight into the warehouse district. You might have a 1950s wrought-iron gate on your driveway and a cold-storage facility three doors down running a 30-foot chain-driven slide gate. We service both, often in the same afternoon. Hal has been welding on site since 2001, and the name on the invoice is the same name on the shop. People in Paramount tend to hear about us from a neighbor on the next block, and that kind of referral carries more weight than any ad. We answer the phone around the clock, we show up when we say we will, and every job gets the 90-Day Done Right Promise in writing. Not a hedge. Not fine print. If it’s not done right, we come back and make it right.
Our response time into Paramount is fast because our crews work this corridor constantly. A live person answers, not a voicemail queue. You’ll know who is coming, when they’ll arrive, and what the job will cost before anyone touches a post hole.
Our Gate Installation Services in Paramount
Driveway Gate
Driveway gate installation in Paramount runs $2,200 to $5,800 for a single swing or slide gate with an operator. The soil here is clay-bearing, so we dig post footings deeper than the minimum a lot of installers in drier inland cities use. A post set at 24 inches in Paramount will shift after the first winter rain. We go deeper, and we use steel posts with concrete collars sized for the gate weight. A driveway gate in Paramount has to survive salt-laden air off the Port of Long Beach, roughly 12 miles southwest, and it has to hold its alignment when the ground swells in an El Niño year.
Pedestrian Gate
Pedestrian gate installation in Paramount runs $800 to $2,400 for a steel or wrought-iron walk gate with a locking latch, and more if you want a keypad or intercom tied in. On older 1940s and 1950s lots, pedestrian gates often hang from the same block wall as the driveway gate, and that wall has spent sixty years soaking up moisture. We weld new hinge plates in place rather than bolting into crumbling block. The gate stays square, and the wall doesn’t need to be rebuilt to make it work.
Sliding Gate
Sliding gate installation in Paramount runs $3,000 to $6,500 for a residential slide, and commercial chain-driven systems on the industrial side of town run higher based on gate length and operator duty cycle. This is the gate Paramount actually needs on shared driveways and narrow frontages, where a swing gate would block the sidewalk or a neighbor’s vehicle exit. We install cantilever and track-guided slides, and we stock operators and parts from LiftMaster, FAAC, BFT, Linear, and Viking in our service vehicles so we’re not running back to a supply house mid-job.
Security Gate
Security gate installation for Paramount homes and commercial properties runs $2,800 to $7,500 and up depending on height, steel gauge, and whether you need access control like a keypad, loop detector, or card reader. The reality in Paramount is that residential streets sit against active warehouse and distribution traffic off Rosecrans Avenue and Somerset Boulevard. A security gate here isn’t curb appeal; it’s keeping through-traffic, deliveries, and unauthorized vehicles off your property. We build and install gates that actually stop someone, not gates that look serious until someone leans on them.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Paramount
We install and service operators from FAAC, BFT, Linear, and Viking, among others. The important thing for Paramount customers is that we stock parts for these brands locally, on the truck, so a failed control board or a stripped rack gear doesn’t mean a two-week wait. If you have an existing Viking operator on a 1960s wrought-iron frame and the frame is still sound, we’ll install the new motor on the old gate and save you the cost of a full replacement. If the frame is gone, we’ll tell you straight and show you why before we quote a new panel. No mystery. The price is agreed before we start, and it doesn’t change at the door.
Common Gate Installation Problems We See in Paramount Homes
- Swing gates specified on shared driveways. A lot of older Paramount lots share a driveway apron, and a swing gate that looks fine on paper will block the neighbor’s vehicle exit or swing over the sidewalk. We see this on narrow lots near Rosecrans Avenue all the time, and the fix is a slide gate, not a smaller swing panel.
- New operator bolted onto a rusted hinge post. The original 1950s or 1960s post has spent decades in salt-laden marine air and it’s fatigued. The motor works fine for six months, then the whole assembly sags and binds. You have to fix the post, not just hang a new motor.
- Shallow footings in clay-bearing soil. Paramount’s soil is heavy and expansive when wet. A post set at code minimum in a dry summer will heave or settle after the first real rain. Gates fall out of alignment and drag on the driveway surface. We pour deeper footings as standard practice here.
- Residential parts on commercial calls. Paramount has a disproportionate number of light manufacturing and distribution facilities for a city of roughly 54,000 people. A technician who stocks only residential-grade parts will fail on half the calls in the 90723 ZIP. We carry heavy-duty slide hardware and commercial controls because the market here demands it.
Pricing for Gate Installation in Paramount, CA
A typical residential gate installation in Paramount runs $1,800 to $6,500. A basic pedestrian gate starts around $800. A single residential driveway slide gate with an operator generally lands between $3,000 and $5,500. A commercial sliding or roll-up security gate on the industrial side of town can run $5,000 to $12,000 or more depending on gate length, duty cycle, and access control requirements. What changes the number is gate size, steel gauge, whether the post footings need to be re-poured, and whether you’re adding a keypad, loop detector, or intercom. We quote the price up front, in writing, and that’s the price. No trip charge inside the county. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 and we’ll give you a real number for your specific site.
We Also Serve Cities Near Paramount
Beyond Paramount, our crews regularly work in Bell, Bellflower, Lynwood, and East Rancho Dominguez. The same crew that handles a residential slide gate off Somerset Boulevard can handle commercial work along the Rosecrans corridor the same afternoon. If you’re in a neighboring city with a shared driveway or a rusted post from the same marine layer, the same Gate Installation team is available.
Serving Paramount, CA - Our Local Coverage Area
We’re based in the Paramount area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Paramount
In most Paramount residential cases, a gate replacement on existing posts does not require a permit, but new post footings, electrical runs, or gates that encroach on a shared right-of-way may trigger City of Paramount building and safety review. We handle the permit paperwork when it’s needed, and we won’t install a gate that blocks a neighbor’s legal access. The safest move is to call (877) 610-2993 and let us check your specific site before you commit to a design.
Yes, in most cases. We inspect the hinge post and the frame first. If the steel is still sound, we’ll mount the new operator on your existing gate and save you the cost of a full replacement. If the post is rusted through from decades of salt-laden air, we’ll show you exactly where it’s failing and re-pour the footing before the motor goes on. The motor is never the weak point. The post is. Call (877) 610-2993 for a free assessment.
Yes. Commercial roll-up and sliding gate access control is a standard part of our work in Paramount’s industrial zones. We install loop detectors, keypads, card readers, and intercom tie-ins on existing gates, and we stock the relays and controls to do it without a return trip. If your facility runs trucks in and out along Somerset Boulevard or Rosecrans Avenue, we’ll set the open and close timing to match your traffic flow. Call (877) 610-2993 to schedule a site walk.
For a residential driveway gate in Paramount’s clay-bearing soil, we typically set footings 36 to 42 inches deep, below the active swell zone. Code minimum in drier inland cities might be 24 inches, but Paramount’s winter rains and expansive soil make shallower footings a gamble. A post that moves half an inch is a gate that binds, and a gate that binds is a gate that will eventually tear its operator apart. We pour deeper because we’re the ones who have to come back if it fails.
For narrow driveways and limited setback, a sliding gate is almost always the right answer in Paramount. Swing gates need room to arc, and on tight lots off the postwar grid they’ll hit the sidewalk or block a neighbor’s access. A cantilever or track-guided slide gate moves along the fence line and needs very little front clearance. We’ve installed slide gates on shared driveways where a swing gate physically could not work. Call (877) 610-2993 and we’ll measure your actual setback and tell you what fits.
If you’re in Paramount and need a gate that will survive salt air, clay soil, shared driveways, and whatever the Rosecrans corridor throws at it, call (877) 610-2993. Hal Gatewood has been doing this since 2001, the name is on the shop, and the price is on the table before we dig the first hole.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Paramount since 2001.