Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Ontario
A new automatic gate in Ontario typically runs $3,800 to $9,500 installed, depending on whether it’s a swing or slide, the operator class, and what’s holding up the post. That’s the number you’re here for, and we’ll stand behind it. We’re Gatewood Fence & Gate, and we’ve been cutting, welding, and setting gate posts since 2001. Hal Gatewood’s name is on the shop, and when you call (877) 610-2993, a live person answers. Not a voicemail tree, not a chatbot, not a call center three states away. Someone who actually knows gates.
Ontario is our kind of town: real work, real trucks, real heat. We know the warehouse yards off Milliken and Haven, the older tract homes near Historic Downtown, and the newer runs out in Ontario Ranch. We don’t send a salesman. We send the person who will do the work, and we quote the price before anything gets bolted down.
Why Gatewood Fence & Gate Is Ontario’s Preferred Gate Installation Company
Most gate companies in Ontario don’t weld. They measure, order a pre-fab panel, and bolt it onto whatever posts are already there. We do it differently because Hal got tired of seeing sloppy work somebody else left behind. We weld on site, in your driveway or at the gate line, so the gate fits your opening, your posts, and your ground, not whatever came out of a catalog. If the post is cracked from Santa Ana wind load, we address the post before we hang the gate. Fix the panel without the post and you’ll fix it twice.
Every Ontario job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back, no runaround, no arguing. That’s not marketing language. It’s printed on every invoice. Homeowners in Ontario who’ve already been burned by a national outfit quoting one price on the phone and charging another at the door tell us they came to us because they wanted a name they could verify. Hal’s address is published, his license number is public record, and he’s been at this over 23 years. That’s the oldest accountability there is.
Response time to Ontario is same-day for emergencies when the gate has failed and you can’t secure your property, and we schedule new installations within a week in most cases. We serve four Ontario ZIP codes: 91764, 91798, 91758, and 91761, plus Ontario Ranch out toward the 91762 edge. You’ll see our truck, not a subcontractor’s wrap.
Our Gate Installation Services in Ontario
Here’s what we actually install in Ontario, week after week. If you’re not sure which setup fits your property, call (877) 610-2993 and describe your driveway. We’ll tell you straight what you’re looking at.
Sliding Gate Installation
Ontario has more sliding gates than most cities its size, and for good reason. Long residential driveways off Euclid Avenue and the industrial corridors along Milliken and Haven use slides because they don’t require swing clearance into traffic. We set the rail, the guide posts, and the operator pad with concrete that holds up to 105°F summers and the thermal expansion that throws cheap installations out of alignment. For truck yards running 50-100 cycles a day, we spec Class IV commercial operators. A residential unit will burn out its drive gear within 18 months. A typical sliding gate in Ontario runs $4,500-$9,500, and that includes the operator, loop detector, and entrapment protection built to UL 325.
Swing Gate Installation
Swing gates dominate the older Ontario neighborhoods near Historic Downtown, where 1940s-1980s tract homes sit behind CMU block walls with wrought iron gates. The hard water here, high mineral content from Colorado River imports, accelerates corrosion on hinge posts and post footings. When we install a swing gate in Ontario, we’re not just hanging steel on old anchors. We check the post, the block wall core, and the hinge footing. If it’s cracked from Santa Ana winds, we address it first. A single swing gate in Ontario generally runs $3,800-$6,800, and a double swing runs $5,500-$9,000 installed with automation.
Driveway Gate Installation
This is the one most Ontario homeowners call about. It starts with measuring the opening, confirming the setback from the street, and deciding whether a swing or slide fits the way you actually use the driveway. We install the full package: gate, posts, operator, safety photo eyes, and a keypad or remote. No trip charge inside the county, and the price is quoted and agreed before any work starts. You’ll see the number on paper before we start digging.
Pedestrian Gate Installation
A walk gate that matches your driveway gate keeps the whole property looking intentional, and in Ontario it also gives delivery people, kids, and guests a way in without cycling the big gate. We build and hang pedestrian gates to match the existing iron or steel, and we can wire them into the same access control if you want everything on one code. Frame, hinges, latch, and concrete setting for a pedestrian gate usually runs $1,200-$2,800 in Ontario.
We also handle Gate Installation for solar-powered rural entrances in the Ontario Ranch edge, where running mains power to the post just doesn’t make sense. More on that below.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ontario
We’re certified to service and install nine major gate brands, and in Ontario we lean on the ones proven to handle this climate and this workload. Viking operators hold up well under heavy industrial cycling along the Milliken corridor. Ghost Controls gets the nod for solar-powered rural gates where wiring isn’t practical. DoorKing is our go-to for older commercial installations that need an operator matching the existing infrastructure. We stock common parts for these brands locally, which means when a drive gear or limit switch fails on a truck-yard gate off Haven Avenue, we’re not waiting a week for a shipped part. Faster turnaround, less downtime for your fleet.
Common Gate Installation Problems We See in Ontario Homes
Ontario has its own failure patterns. Here’s what we run into constantly, and what it means for a proper installation.
- Undersized operators on truck-yard gates. Along Milliken and Haven, gates cycle 50-100 times daily under semi-truck weight. Installers who cut costs with a residential or light-commercial unit get callbacks within 18 months when the drive gear or limit switch burns out. We spec Class IV from the start.
- Santa Ana wind fatigue on swing gates. Those sustained northeast gusts over 50 mph push lateral force onto swing gate hinges and the CMU block wall anchors. We see hinges fatigued, posts cracked, and gates binding out of alignment, especially along the industrial corridors where there’s little wind break.
- Hard water corrosion on older wrought iron. The Colorado River water that supplies Ontario carries heavy mineral content. It accelerates rust on hinge posts and post footings in the older tract-home neighborhoods around Historic Downtown. A gate that looks fine from the street is often failing at the post from years of irrigation runoff and hard water exposure.
- Thermal expansion throwing off slide gate alignment. Inland Empire summers regularly exceed 105°F. That heat warps composite infill panels and causes enough thermal expansion to throw a slide gate out of tolerance if the original installation didn’t account for it. We set wider rail tolerances and account for summer peak temps on every Ontario slide installation.
Key Takeaways
- Ontario truck-yard gates need Class IV operators, not residential units. Anything less fails within 18 months.
- Santa Ana winds and hard water are the two biggest killers of residential gates in Ontario’s older neighborhoods.
- Solar-powered operators make sense for long rural driveways in Ontario Ranch where running power means a 300-foot trench.
- Quotes are written, agreed, and signed before any work starts. No surprises at the door.
Pricing for Gate Installation in Ontario, CA
Here are the honest numbers for Ontario‘s market. A single swing gate installed runs $3,800-$6,800 with automation. A double swing runs $5,500-$9,000. Sliding gates run $4,500-$9,500 depending on operator class and rail length. Pedestrian gates are $1,200-$2,800. Solar-powered operators add $1,800-$3,200 on top of the gate itself, depending on the panel and battery bank needed. What moves the price: post condition, whether we’re setting new footings or working with existing block wall, how far the power run is, and operator class. Commercial Class IV installations for truck yards run higher because the operator itself is built heavier.
You’ll get a written price before we start, and that price doesn’t move. We offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate from another company. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for an exact quote, the estimate is free.
We Also Serve Cities Near Ontario
We handle gate installation across the western Inland Empire, from Montclair and Upland to Chino and Claremont. If you’re in one of those cities and your gate has started sagging or your operator quit cycling, we’ll send the same crew that works Ontario’s truck yards and canyons, same pricing, same 90-Day Done Right Promise. Dispatch and scheduling run out of our Inland Empire office down the road, and crews serve Ontario locally every day of the week.
Serving Ontario, CA - Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Ontario
A truck-yard gate off Milliken Avenue needs a Class IV slide gate operator, minimum. Those gates cycle 50-100 times a day under semi-truck weight, and a residential or light-commercial unit will burn out its drive gear and limit switches within 18 months. In fact, along the Milliken and Haven corridors, we’re constantly replacing undersized operators that installers cut costs with, and the callback is almost guaranteed. We spec Class IV from the first install so you don’t pay twice. Call (877) 610-2993 for a site assessment and exact quote.
Yes. A solar-powered gate operator is the standard fix for long driveways in Ontario Ranch’s rural edges where running mains power would mean hundreds of feet of trenching. We recently retrofitted a solar-powered LiftMaster swing gate operator on a 24-foot farm gate off a long driveway that would have needed a 300-foot trench for mains power. The system included a new concrete post footing (the old one had cracked from Santa Ana wind loads), a Viking loop detector for vehicle exit, and a Ghost Controls keypad for the owner’s gate code. Solar operators run quieter and last if sized correctly, and we handle the panel, battery bank, and charge controller as part of the package.
Santa Ana winds push sustained lateral force against swing gates, and in Ontario’s older neighborhoods near Historic Downtown, that force lands on the CMU block wall anchors that hold most residential gate posts. We see cracked posts, fatigued hinges, and gates that bind or sag out of alignment after repeated wind events over 50 mph. The fix starts at the post, not the panel. We set new concrete footings when needed and use larger anchor bolts into the block wall core than what builder-grade installations used.
A new automatic gate in Ontario must meet UL 325 entrapment protection standards, which means photo eyes or contact edges on the gate itself, plus a secondary entrapment protection device depending on the operator. This is non-negotiable. We install photo eyes across the gate opening, edge sensors on the leading edge of the gate, and we program the operator for the correct closing force so it reverses on obstruction. If you’re replacing an old operator on an existing gate, we’ll bring the entrapment protection up to current standard at the same time.
Cold-storage facilities and fleet yards along the Milliken and Haven corridors run gates 50-100 cycles per day, and at that volume, operators need maintenance every 3-4 months minimum. Limit switches drift, chains stretch, loop detectors get flaky, and drive gears wear. We set up maintenance schedules for industrial clients in Ontario so the gate doesn’t fail during a live load. Most residential gates can go on an annual service plan. Call (877) 610-2993 and we’ll set up a schedule that fits your cycle count.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Ontario since 2001.