Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across New Rochelle
Gate installation in New Rochelle runs anywhere from $2,800 for a basic single swing gate to $18,000+ for a custom ornamental double gate with underground automation. Most driveway gate projects land between $5,500 and $12,000 depending on the gate material, operators, and whether we’re working with existing posts or setting new ones. We serve every New Rochelle neighborhood, from the waterfront blocks off Davenport Neck to the older estates in Wykagyl and the colonials north of Quaker Ridge Road. Call (877) 610-2993 and you’ll get Hal or someone from his crew on the line, not a voicemail.
Key Takeaways
- New Rochelle gate installation typically costs $5,500-$12,000 for most driveway projects; basic pedestrian gates start around $2,800.
- Salt air within a half-mile of Long Island Sound changes everything about hardware selection. Corrosion-resistant components are not optional in the 10801 and 10805 ZIP codes.
- We’re a locally owned, owner-operated shop that has been doing this since 2001. Every job includes the 90-Day Done Right Promise in writing.
- Free estimates. No trip charge inside Westchester County. $40 off any repair over $200, plus a permanent 10% discount for seniors and veterans.
Why Gatewood Fence & Gate Is New Rochelle’s Preferred Gate Installation Company
We have been installing and repairing gates across Westchester since 2001, and New Rochelle has always been one of our busiest service areas. The work here is different from what you see in inland suburbs. Between the salt air off Long Island Sound, the freeze-thaw cycles that heave masonry posts on the North End, and the sheer number of 1920s-1950s ornamental iron gates still swinging in Wykagyl, there is no room for cookie-cutter installation.
Hal Gatewood owns the company, answers the phone at all hours, and will tell you straight if a gate post needs rebuilding rather than just adjusting. The name is on the shop, and the address is published, so anyone can look us up before we ever set foot on the property. That’s the oldest accountability there is.
Our clients in New Rochelle keep calling back because we don’t sell replacements for gates that still have decades left. We weld on site, rebuild posts properly, and stand behind every install with the 90-Day Done Right Promise. If it’s not done right, one call brings us back. No runaround.
Our Gate Installation Services in New Rochelle
No two gate installations in New Rochelle look the same. A colonial on a hill in the 10804 ZIP needs different hardware than a waterfront property off Pelham Road where the morning fog leaves salt on every metal surface. Here’s what we handle most often.
Driveway Gate Installation
Driveway gates in New Rochelle range from simple single-swing steel gates to carved double iron gates spanning 20-foot entries on North End estates. We fabricate custom gates, work with pre-manufactured panels, and match existing ornamental ironwork when a homeowner wants the new gate to pair with the original fence. Every driveway gate install includes proper post footings, hinge selection matched to gate weight, and operator sizing that accounts for wind load near the Sound.
Swing Gate Installation
Swing gates remain the most common choice in New Rochelle, especially in Wykagyl and the older neighborhoods where stone or brick pillars already frame the entrance. Those pillars are beautiful, but they are also 70-100 years old in many cases, and freeze-thaw cycles have shifted many of them out of plumb. We check pillar stability before hanging anything. If a pillar has moved, we rebuild the footing or add reinforcement so the gate doesn’t sag in six months. A gate sags in the hinge post, not in the middle, and that’s where we start.
Pedestrian Gate Installation
A pedestrian gate next to a driveway gate gives you a way in and out without cycling the big gate every time. In New Rochelle, many homeowners on Winthrop Avenue and along North Avenue have narrow side yard entries where a full driveway gate doesn’t make sense. We build pedestrian gates in steel, aluminum, and ornamental iron, with matching hardware and finish so they read as part of the same property.
Sliding Gate Installation
Sliding gates work when a driveway slopes upward or when there’s no room for a gate to swing inward. They’re common on busier New Rochelle streets where a swinging gate would extend over the sidewalk, which the City of New Rochelle building department takes seriously when reviewing permit applications. A properly installed slide gate rides on a track with a cantilever or V-track system rated for the panel weight. Pairing the right operator is the difference between a gate that rolls smoothly for 15 years and one that binds and trips the motor within months.
Double Gate Installation
A heavy ornamental double gate, the kind you see on the older estate properties near Five Islands Park or along Davenport Avenue, demands more than just two leaves and a pair of hinges. Each leaf is independently heavy, often 300-500 pounds, and the operators must be synchronized so both leaves open and close together without lagging or slamming. We see a lot of failed double gate installs where someone paired a forged iron double gate with an undersized slide operator. The motor was never sized for the load, and it burns out inside a year. We size the operator to the actual gate, not to what’s on a shelf.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in New Rochelle
We install and service nine major gate operator brands, including DoorKing, Elite, and LiftMaster. For New Rochelle specifically, we keep corrosion-resistant rack and pinion sets, stainless fasteners, and marine-grade hinge options stocked and ready because we know salt air along the Sound chews through standard hardware faster than anywhere else in Westchester. That means less waiting when your opener fails and a faster turnaround when we’re matching an existing automated system. If you’ve got a Ghost Controls or Viking opener that someone else installed wrong, we’ll sort it out.
Common Gate Installation Problems We See in New Rochelle Homes
- Salt corrosion on hinge posts and rack drives. Gates installed within a half-mile of the Long Island Sound shoreline routinely show rust-through and hinge seizure years before identical gates in the 10804 ZIP. Standard steel hardware simply doesn’t hold up in that marine air.
- Freeze-thaw post heave throwing gates out of alignment. The masonry pillar entries common on North End and Wykagyl properties heave and shift every winter. We rebuild post footings below frost depth to stop the cycle.
- Undersized operators on heavy ornamental gates. A wrought iron double gate from the 1930s can weigh more than half a ton. Put an operator sized for a lightweight aluminum gate on it and the motor burns out within months.
- Mismatched hardware on gate replacements. When a new gate leaf gets hung on old hinges or a freshly welded panel is bolted to a rusted post, the new part fails early and the homeowner blames the gate. The gate was never the problem.
Pricing for Gate Installation in New Rochelle, NY
Here’s what New Rochelle homeowners can expect to pay. A basic single swing driveway gate with a chain-driven operator starts around $5,500. A mid-range ornamental steel double gate with a modern operator runs $8,000-$12,000. Custom fabricated gates with underground operators, intercom integration, and safety photocells start around $14,000 and go up from there based on material and span. A simple pedestrian gate runs $2,800-$5,000 installed. These are installed prices, not just the gate panel price.
What pushes cost up in New Rochelle specifically is corrosion-resistant hardware. On coastal blocks, upgrading to stainless hinges, sealed bearing rollers, and marine-grade coatings adds $800-$2,000 to the project but buys years of service life. Every estimate is free, and the price we quote is the price you pay before we start. No trip charge inside the county. Call (877) 610-2993 for an exact quote for your property.
We Also Serve Cities Near New Rochelle
Beyond our Gate Installation work across New Rochelle’s 10801, 10802, 10804, and 10805 ZIP codes, we regularly serve New Rochelle neighbors in Pelham, Pelham Manor, Larchmont, and Wykagyl. If you’re a half-mile over the line, we’re already in the area.
Why Coastal New Rochelle Needs a Different Gate Installation Approach
Gates within a half-mile of the Long Island Sound shoreline in the 10801 and 10805 ZIP codes show rust-through and hinge seizure years ahead of identical gates in the inland 10804 ZIP. That is not a theory. We see it every month. The salt-laden air off the water settles on every exposed metal surface, and combined with Westchester’s year-round humidity, it creates a corrosion environment closer to what you’d expect on a boat than in a backyard. Hinges seize. Welded joints rust through. Automated gate operators start tripping their breakers because the rack and pinion has swollen with rust. If you’re installing a gate north of Quaker Ridge or up near the New Rochelle-Scarsdale line, standard hardware will serve you fine for years. But if you’re within sight of the water off Davenport Neck or near Five Islands Park, corrosion-resistant hardware and annual lubrication become effectively mandatory rather than optional.
On a Wykagyl estate with an original 1930s ornamental wrought iron swing gate, we replaced a seized hinge post and installed a LiftMaster underground operator with corrosion-resistant rack and pinion, rebuilding the post footing to correct freeze-thaw heave. The gate now swings silently and stays aligned through coastal salt exposure. That project is exactly the kind of work that separates a gate installer who knows New Rochelle from one who shows up with a stock gate panel and a standard hardware kit.
The older homes are another piece of it. New Rochelle has a huge stock of estate and colonial-era homes, especially in Wykagyl and the North End, many with original ornamental gates from the 1920s through the 1950s. Many of those gates are 70-100 years old and already past their service life. They need structural restoration, not just a new hinge and a fresh coat of paint. Gatewood Fence & Gate is the local shop that fixes the gate in your driveway rather than hauling it off and selling you a panel you never wanted.
Serving New Rochelle, NY - Our Local Coverage Area
We’re based in the New Rochelle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in New Rochelle
Yes. If your property is within a half-mile of Long Island Sound, corrosion-resistant hardware is essentially mandatory. Standard steel hinges and rack-and-pinion drives installed on waterfront New Rochelle blocks show rust-through within 2-3 years. We spec stainless and marine-grade components on every coastal install. Call (877) 610-2993 and we’ll give you an exact quote for what your property needs.
We rebuild the post footing below frost depth so the freeze-thaw cycle stops shifting the gate. In older New Rochelle neighborhoods like Wykagyl and the North End, many original masonry pillars have shifted over decades of Westchester winters. We don’t just shim the gate and hope it stays; we set new footings, reinforce the post, and align the gate so it swings true. Estimates are free.
Yes, we do this often in New Rochelle, especially on older estate properties where homeowners want to keep the original ornamental double gate but add modern automation. We size the operator to the actual gate weight, not the other way around. A heavy forged double gate needs a properly matched pair of operators. Call (877) 610-2993 and we’ll come measure and quote it.
It depends on the driveway and the property. Swing gates work well on flat driveways with room for the leaves, and that’s what most North End and Wykagyl properties have. Slide gates make sense when the driveway slopes or when swinging leaves would extend over the sidewalk, which New Rochelle code reviews carefully. We’ll recommend the right option when we measure. Free estimate: (877) 610-2993.
Annual lubrication of hinges, rollers, and the rack-and-pinion drive is effectively mandatory within a half-mile of the Sound. We also recommend cleaning and inspecting welded joints each spring. If you’re in the 10805 ZIP near Glen Island or the 10801 waterfront, salt will accumulate on everything. We offer ongoing maintenance for New Rochelle homeowners. Call (877) 610-2993 and we’ll put you on a schedule.
Get a Free Gate Installation Estimate in New Rochelle
If you’re thinking about a new driveway gate, pedestrian gate, or automated double gate in New Rochelle, call (877) 610-2993 and we’ll come out, measure, and give you a written price before any work starts. Hal Gatewood works New Rochelle himself when the job calls for it, and he stands behind every install with the 90-Day Done Right Promise in writing. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving New Rochelle since 2001.