Gate Repair in Maywood - Same-Day Repair, Priced Before We Start

Gate Repair in Maywood, CA

A gate that won’t close in Maywood is a security problem, not a nuisance. Most repairs here run $160 to $420 for the common failures: sagging hinges, bent frames, dead openers. We can usually get to your Maywood property the same day you call (877) 610-2993, and a live person answers that number around the clock.

Call (877) 610-2993

Why Maywood Homes Are Different

Maywood sits about 12 miles inland in the LA Basin, which means morning marine-layer humidity followed by hard afternoon sun. That combination rusts bare iron at every weld and hinge while UV breaks down paint and powder coat. A gate that looked solid two years ago can be corroding inside its seams today.

The housing stock compounds the problem. Maywood is one of the most densely populated cities in California, built out almost entirely with small post-WWII stucco bungalows and duplexes on lots so compact that driveways run 9 to 10 feet wide. Most homes added wrought iron security gates in the 1970s and 80s. Those gates are now 40 to 50 years old, with hinges load-bearing on posts that have spent decades in moisture-cycling soil. The metal is pitted, the hardware is tired, and nearly every original install was manual, never built for automation.

We work the neighborhoods around Maywood Avenue, the blocks off Atlantic Boulevard, the streets east of Slauson Avenue near the LA River, and the tight residential corridors around 52nd and 55th Streets. The narrow driveway is the single biggest factor in what fails and how we fix it.

Gate Repair in Maywood

Gate repair in Maywood typically runs $160 to $420, depending on whether the problem is a bent frame, a rotted hinge post, or a failed opener component. Most Maywood driveways are only 9 to 10 feet wide, which leaves almost no swing clearance, so vehicle strikes and hinge stress are the most common failures we see. We weld on site, in your driveway, and the price is quoted in writing before any work begins. Our full Gate Repair service covers everything from a dragging leaf to a gate that won’t open at all.

Electric Gate Repair

Most Maywood automatic gates were retrofitted in the 1970s and 80s, often with operators that were never upgraded to modern safety standards. The photocells failed years ago, control boards short out from marine-layer moisture, and openers struggle against gates heavier than they were rated for. We diagnose the actual failure instead of swapping the whole operator, testing voltage at the motor, checking the capacitor and limit switches, and tracing the fault before we sell you anything. Electric gate repair, including control board replacement and limit switch adjustment, runs $220 to $475 in Maywood.

Hinge & Post Repair

A gate sags in the hinge post, not in the middle, and that’s where we start. In Maywood, the hinge post is usually steel set into a footing that has been trapping water for decades. Rust accelerates at the soil line, the post weakens, and the whole gate drops. We cut out the corroded section, set a new post footing, and weld the hinge brackets back so the gate hangs true. Hinge and post repair runs $280 to $520 depending on how much of the post must be replaced.

Gate Realignment

If your Maywood gate drags the ground, catches on the latch side, or leaves a gap that won’t close, the frame is out of plumb. Bent gates from vehicle strikes are the most common repair we do in this city, because a 9-foot driveway leaves no room for error on a tight turn. We use a come-along and welding heat to pull the frame back into square, then reinforce the weak points so the next bump doesn’t undo the work. Realignment and re-welding usually costs $160 to $380.

Why do so many Maywood driveway gates need slide-gate conversions instead of swing gate repairs?

Most Maywood driveways are only 9 to 10 feet wide, which leaves almost no room for a swing gate to open without the vehicle hitting it. When a swing gate has been struck multiple times and the frame is too far gone to re-align, a slide-gate conversion is often the only permanent fix. Slide-gate conversions for Maywood’s narrow driveways, with custom low-profile track work, typically run $1,200 to $2,400.

My 1970s wrought iron gate in Maywood is sagging. Is it worth repairing or should I replace it?

Almost always worth repairing. The sag you’re seeing almost always comes from a failing hinge post, not a failing gate. We cut out the corroded post, weld in a new footing and post, and rehang the gate so it swings true. That costs $280 to $520 in Maywood, compared to $2,000 and up for a fabricated replacement you probably don’t need. Call (877) 610-2993 and we’ll tell you straight.

Gate Installation in Maywood

Gate installation in Maywood costs $1,900 to $6,800 for most residential projects, with narrow-lot slide gate conversions running $3,200 to $7,500 depending on track length and operator choice. The driveway width drives every decision here, because a standard swing gate needs an arc that a 9-foot Maywood driveway simply doesn’t have. We measure the actual space, then tell you straight whether a swing gate, a slide gate, or a custom low-profile track is the right call. Our Gate Installation work starts with a free measure and a written price.

Driveway Gate Installation

A driveway gate in Maywood has to work in ten feet of width or less. Standard swing gates need an arc, and on a 9-foot driveway that arc collides with the car, the fence, or the neighbor’s wall. We install custom driveway gates sized to your actual measurements, not a one-size-fits-all panel from a catalog. For tight lots, that often means a slide gate on a low-profile track that runs parallel to the fence line instead of swinging into traffic.

Sliding Gate Installation

Sliding gates are the workhorse solution for Maywood’s narrow driveways. Instead of needing swing clearance, the gate rolls along a track set at the base of the opening. On Maywood lots, we typically use a low-profile rack and pinion track that clears the curb without creating a tripping hazard. The narrow-lot slide gate conversions we do so often in Maywood, with custom low-profile track, FAAC or DoorKing slide operator, and safety edges, typically run $3,200 to $7,500.

Pedestrian Gate Installation

The pedestrian gate is the one you use every day, which means it’s the first to sag, bind, or lose its latch. On Maywood’s older bungalows, the pedestrian gate frequently shares a post with the driveway gate, so a failing post throws both out of alignment. A basic single pedestrian gate with welded steel frame and hardware runs $900 to $1,800. We weld on site, square the post, and re-hang the pedestrian gate so it closes without slamming.

Can you convert my old wrought iron swing gate to an automatic slide gate on a very narrow Maywood lot?

Yes, and we do it regularly. The conversion usually means repurposing the existing gate panel where the steel is still sound, then adding a low-profile track, a slide operator like FAAC or DoorKing, and new safety edges. On the tight lots near Liberty Boulevard, we’ve set reinforced post footings and installed keypad entry and cameras the same day. Call (877) 610-2993 for a free measure and a written quote.

Does Maywood require special entrapment protection for automatic gates?

Automatic gates in Maywood must meet California’s entrapment protection standards, which require safety edges or photo eyes that stop and reverse the gate if a person, pet, or vehicle is in the path. We install compliant safety systems on every automatic gate job and test the reverse function in front of you before we pack up. If your older gate has no entrapment protection, it’s running against code.

Gate Motor & Opener in Maywood

If your gate opener quit this morning and your car is stuck in the driveway, we’ll get it moving again. Gate motor repair in Maywood typically runs $180 to $420 depending on whether it’s a control board, a limit switch, or the motor itself, and we can usually have someone at your door the same day. We’ve worked on gates across Maywood, from the bungalow courts near Slauson Avenue to the duplex rows off Atlantic Boulevard. Our Gate Motor & Opener work covers diagnostics, repair, and full replacement.

Motor Repair

Most gate motor problems in Maywood trace back to worn limit switches, failing capacitors, or corrosion on the control board connections. We bring the diagnostic tools to tell you exactly what failed and what it costs to fix before we touch a screwdriver. Repair-first is how we work. If the motor has life left in it, we’ll tell you honestly and fix only what needs fixing, with most repairs landing between $180 and $420.

Motor Installation

A new opener on a Maywood home usually takes us half a day. We install motors that fit the small clearances and narrow posts common in the 90270 zip code, and we wire everything cleanly so future service is straightforward. A full motor installation, including the operator arm, brackets, safety edges, and power connection, usually lands between $850 and $1,600 depending on whether it’s a swing or slide application.

Slide Motor Conversion

Some Maywood properties can’t swing a gate at all. A slide motor turns that problem into a smooth, reliable setup, but the tiny lot widths here often require a custom low-profile track built to fit. That’s exactly the kind of work we do on site. A slide motor conversion, which is the most common upgrade on Maywood’s narrow driveways, often runs $1,400 to $2,300 with a custom fabricated low-profile track.

What does a full gate motor installation include?

A full installation includes the motor or operator arm, mounting hardware, safety edges and photo eyes, the power run from your electrical panel, and programming of all remotes and keypads. In Maywood, we also check the gate’s hinges and alignment before mounting the opener, because an opener on a sagging gate fails fast. You’ll get one written price for the whole job before anything starts.

Do you cover all of Maywood, or just certain streets?

We cover every address in Maywood’s 90270 zip code, from the blocks off Slauson Avenue near the river to the neighborhoods east of Atlantic Boulevard. If you live in Maywood, you’re in our service area, and there’s no trip charge inside Los Angeles County. Call (877) 610-2993 and a live person answers, day or night.

Gate Access Control in Maywood

When a keypad goes dead or the gate stops reading a card at 6 a.m. on a workday, you’re not thinking about access control in the abstract. You’re thinking someone’s going to be late, and the gate is stuck closed. In Maywood, where nearly every property has a security gate and driveways run nine feet wide, that gate is often the only way in or out. Our Gate Access Control service covers keypads, remotes, phone entry, and card readers.

Keypad Entry

A keypad is still the most common access point on Maywood gates, and the old ones fail in predictable ways: cracked key faces, corroded terminals, and membranes that lose their sensitivity. We install and service wired and wireless keypads, and we mount them where Maywood’s moisture and UV exposure won’t kill them in 18 months. Typical keypad replacements in Maywood run $180 to $350, depending on whether the wiring is still good.

Remote Control

If your gate uses remotes but only one works, or the gate opens when you’re still 30 feet away, the receiver is usually the culprit. We bench-test receivers, re-program remotes, and add new ones on the spot. Most Maywood homes need two to four remotes. We can clone compatible remotes for about $45 to $75 each, and a new receiver runs $125 to $250 installed.

Phone Entry

For duplexes and small rental properties in Maywood, a phone entry system lets visitors call a tenant’s cell from the gate keypad. Older systems tied to landlines are failing because Maywood homes have largely dropped landlines. We convert those to cellular or VoIP-based units so the gate still opens for the mail carrier and the in-laws. A cellular phone entry conversion in Maywood typically runs $650 to $1,200.

Can you fix an access control system that hasn’t worked in years?

Usually, yes. Maywood has a lot of gates that were automated in the 1980s and haven’t worked right since. The wiring may be salvageable, or it may need replacing, but we’ll test everything in front of you before recommending a repair or a replacement. We repair before we replace, and the price is agreed before any work starts. If someone quoted you a full system replacement, get a free second opinion from us first.

Is access control in Maywood more expensive than other parts of LA County?

Not from us. A keypad replacement in Maywood runs $180 to $350, which is the same range we quote in Cudahy, Commerce, and Huntington Park. The one thing that adds cost in Maywood specifically is conduit work, because so many driveways and walkways are poured concrete with rebar, and running a new wire line through that takes longer. You’ll see that line on the quote if it applies.

Gate Parts & Welding in Maywood

If your Maywood gate sags, drags, or won’t latch, the problem is almost never the panel itself. It’s the hinge post, the hinge barrels, or a top rail bent by a vehicle strike on a driveway that’s barely nine feet wide. We fix all of it on site, with welding done in your driveway, not hauled off to a shop. Our Gate Parts & Welding service covers everything from a single hinge to a full frame rebuild.

Hinge Replacement

Hinge replacement is the single most common gate repair in Maywood, and it’s almost always a bent or sheared hinge pin from a vehicle clipping the gate on a tight turn. We carry weld-on barrel hinges and heavy-duty strap hinges in the truck, sized for the narrow swing arcs on Maywood’s 9-foot-wide driveways. Hinge replacement runs $180 to $320 per pair, including cutting off the old hinges and welding on new ones.

Post Replacement

Maywood’s damp marine air sits on metal, year after year. The result is hinge posts rotted at the soil line, with the gate slowly dropping until it drags on the driveway. We replace those posts with new steel set in fresh concrete, and we’ll brace the gate in place while the concrete cures so you aren’t locked out of your own driveway. Post replacement runs $450 to $750, depending on the footing depth and whether we’re setting new concrete.

Rail Repair

Top and bottom rails take the brunt of every vehicle strike on a tight Maywood driveway. We see bent top rails and rusted-through bottom rails constantly. We cut the damaged section, weld in new steel, and grind it smooth so the repair disappears. On a 1970s gate with good bones, rail repair keeps it on the driveway for another decade. Rail repair runs $200 to $400 per rail, depending on how much steel needs replacing.

My 1980s Maywood swing gate sags on the latch side but the panel isn’t cracked. Do I need a new gate?

No. You need the hinge post looked at. In Maywood, a sagging latch side on an older wrought iron gate almost always comes from a hinge post rotted at the soil line or hinge pins worn thin from years of swinging a heavy leaf. We replace the post or the hinges and re-hang the existing gate, which is a $450 to $750 fix instead of a $1,500 to $3,000 replacement.

Why do the hinge pins on my Maywood gate shear off every couple of years?

Because the gate is getting struck by vehicles. That’s the Maywood signature, and it happens because the driveway is only 9 or 10 feet wide and the gate leaf extends into the turning path. The fix isn’t bigger hinge pins, it’s changing the geometry. We can shorten the gate leaf, move the hinge points, or convert to a slide gate that doesn’t swing into the driveway at all.

Brands We Service in Maywood

We service FAAC, BFT, Linear, and Viking operators in Maywood, along with LiftMaster, DoorKing, Elite, Mighty Mule, and Ghost Controls. Parts for the most common failures are stocked on the truck, so most repairs happen in one visit rather than waiting on a shipment. You can see the full list on our brands page.

Pricing for Gate Repair in Maywood, CA

Neighborhoods We Serve in Maywood

We work the whole city, and these are the areas we’re in most often. Typical response time in Maywood is same-day or next-morning for repairs.

• The neighborhoods around Maywood Avenue
• The blocks off Atlantic Boulevard
• The streets east of Slauson Avenue near the LA River
• The residential corridors around 52nd and 55th Streets
• The area near Pine Avenue Park

Service Area - Cities Near Maywood

Gatewood Fence & Gate serves Maywood, CA and the surrounding southeast LA County cities, including Cudahy, CA, Commerce, CA, Huntington Park, CA, Walnut Park, CA, and Boyle Heights, CA. Same crew, same pricing, same 90-Day Done Right Promise.

FAQs About Gate Repair in Maywood