Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across Marco
A new gate in Marco should last decades here, not three or four seasons. That means the hinge post is set deep enough for our sandy barrier island soil, the steel is coated for constant salt air, and the operator is protected from moisture moving in off the Gulf. We measure, build, and install gates that hold up to Marco’s particular environment, and we quote the full price before any work starts. Call (877) 610-2993 for a free estimate at your home in Marco.
Why Gatewood Fence & Gate Is Marco’s Preferred Gate Installation Company
This is our kind of work. We’re a locally owned shop that’s been at this since 2001, owned and operated by Hal Gatewood. A live person answers our phone around the clock, not a recording, not a call center three states away. When you call about a Gate Installation in Marco, you’re talking to someone who can actually schedule the visit and meet you at the gate.
What we hear most from Marco homeowners is that the last company said one price on the phone and showed up with a different number. We don’t do that. The price Hal quotes is the price you pay, in writing. And every job carries our 90-Day Done Right Promise in black and white. If something isn’t right, one call brings us back. Hal’s name is on the shop, his address is published, and he stands behind the work the way you’d expect from someone you might run into again at the grocery store on Marco.
We’ve installed gates on canal-front homes near the Jolley Bridge, in silent-neighborhood subdivisions off San Marco Road, and at Gulf-front properties along the beach ends of the island. The common thread in every one is salt. It’s in the air, it’s in the rain, it’s in the ground. We plan every install around that from the first measurement, not as an afterthought.
Our Gate Installation Services in Marco
Most Marco properties fall into one of two categories: the 1970s-era canal-front homes built by Deltona’s early planners, and the newer condominium and estate developments that came after. We’ve worked both. Here’s how each of our services fits the homes we see on the island.
Driveway Gate Installation
A driveway gate on Marco usually guards a pavered entrance, keeping foot traffic off the property while you’re at the beach or back north for the summer. We size the gate to your exact opening, set the posts with enough depth for the island’s sandy fill, and coat every weld point against the salt air before the paint goes on. If your HOA has specific rules about gate height or design, we’ll walk through the requirements with you before we order anything.

Pedestrian Gate Installation
Your pedestrian gate is the one that gets used twenty times a day, which is why corroded hinges and sagging panels are such a common sight around Marco. A new pedestrian gate from us gets stainless hinges, a coated frame, and a latch that stays aligned through the humidity swings we see from June through October. We can match the style of an existing pool or patio gate so the whole property reads as one piece.

Sliding Gate Installation
When a driveway is too narrow for a swing gate to open fully, or when a pavered corner doesn’t have room for the gate’s arc, a sliding gate is the answer. The track system a sliding gate rolls on takes a particular beating in Marco, where fine sand and salt constantly work into the rollers. We use heavy-duty track and hardware made for coastal conditions, not the light-duty stuff that strips out in eighteen months.

Swing Gate Installation
Most of the single-family gates we install in Marco are dual-swing driveway gates, often replacing a 45-year-old wrought-iron original that’s now more rust than steel. We set the hinge posts in concrete footers sized for the gate’s weight, then hang the leaves so they clear the pavers without dragging. Everything gets a corrosion-resistant coating before paint. A swing gate that’s hung right will open smooth and close true for decades here.

Double Gate Installation
A double gate is two leaves meeting in the middle, and the middle is where trouble starts when the posts shift or the hinges sag. We set both posts at the same depth, align the leaves so they meet tight but don’t bind, and run the automation so both leaves open evenly every time. A double gate done wrong is one of the things Hal enjoys finding when someone else got there first, because the repair usually costs more than the original install would have.

Security Gate Installation
A true security gate in Marco means more than a heavy leaf. It means reinforced frame rails, a locking operator, and often access control tied to a keypad or intercom. We install security gates for waterfront estates where the owners want practical protection that also looks like it belongs in the neighborhood. No one on Marco wants a prison gate in their front yard, and we don’t install them.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Marco
We’re certified to service and install equipment from nine major gate brands, and the ones we put in most often around Marco are Linear, Ghost Controls, and DoorKing. We stock common parts locally so we’re not telling you to wait a week on a shipping confirmation. When a snowbird calls from Marco in November and the operator on their gate has seized up after five months of sitting through the salt air and humidity, we want to have what we need to fix it that day. And if the gate itself is beyond saving, we’ll tell you that straight, and we can quote a replacement on the spot. We also handle Gate Motor & Opener in Marco work, so you don’t need to call a different company for the operator and a separate one for the gate itself.
Common Gate Installation Problems We See in Marco Homes
Marco’s geography creates a predictable list of gate failures. Here’s what we regularly find when a homeowner on the island calls us out.
- Hinge post rot and corrosion at the base. Salt air concentrates at ground level, where the post meets soil and moisture. Original steel posts on 1970s-era homes off Elkham Circle and Court and San Marco Road are often the first thing to go, and fixing the gate without fixing the post means you’ll fix it twice.
- Operator failure after long absences. When a gate sits closed from May to November, the circuit boards and gears absorb months of humid, salty air without moving. The first time a returning snowbird taps the remote in November, a motor that ran in April may not move at all. This is why late October through Thanksgiving is our busiest stretch for gate work on the island.
- Welded gate panels splitting from salt corrosion. On older painted-steel gates that were welded decades ago, the weld points are where rust attacks first. The paint stays intact on the face of the gate while the welds underneath quietly enlarge until a leaf cracks loose. We see this often on gates within a half-mile of the water, in any direction.
- Sandy soil causing post lean. Marco’s base is sand and fill, not rock. A post set in a shallow hole with too little concrete will lean within a couple of years, pulling the gate leaves out of alignment so the latch won’t catch. When we install, the holes go deep enough to resist that shift, which matters more here than it does inland.
For homes adding access control at the same time as a new gate, we coordinate with Gate Access Control in Marco work so the keypad, intercom, and operator all speak to each other from day one, rather than getting pieced together later by two different shops.
Pricing for Gate Installation in Marco, FL
You deserve actual numbers, not a vague promise. Here’s what we quote for gate installation work on Marco:
- Pedestrian gate installation: $800-$2,000 depending on material and size.
- Single driveway swing gate, installed with posts and hardware: $2,200-$4,800.
- Double driveway swing gate: $4,500-$8,500, depending on width, material, and automation.
- Sliding driveway gate with track and operator: $5,000-$9,500.
- Security gate with reinforced frame and access control: $7,000-$14,000, depending on perimeter and system.
What moves the number is material choice: aluminum outlasts steel in Marco’s salt air but costs more up front, and a coated steel gate with a quality finish sits in the middle. Automation adds to the total, and access control adds more. Everything is quoted and agreed in writing before any work starts. You’ll know the full price at the door, not after the job. Call (877) 610-2993 and we’ll come measure and give you a real number.
We Also Serve Cities Near Marco
Our work on Marco takes us across the causeways to the neighboring communities we know just as well: Gate Installation in Marco is our home base, but we regularly install in Marco Island, Naples Manor, East Naples, and Naples. Same crew, same pricing, same guarantee.
Serving Marco, FL - Our Local Coverage Area
We’re based in the Marco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Marco
We can usually get someone out to your property in Marco within 48 hours, often sooner. Estimates are free, and the visit doesn’t cost you a trip charge if you’re inside Collier County. Call (877) 610-2993 and we’ll set a window we keep.
We cover the entire island of Marco, all of ZIP code 34146, from the estates near the beach to the canal-front streets and everything between San Marco Road and South Collier Boulevard. If your home is on the island, it’s in our service area.
Yes. Many of the condo and HOA communities on Marco have design rules about gate height, color, and automation, and we work with property managers to make sure the install complies. We’ll request the HOA specs before we quote, so there are no surprises mid-install.
A single driveway gate on Marco typically runs $2,200-$4,800, which is about 10-15% more than the same gate inland because of the corrosion-resistant materials and coatings required here. The hardware and prep work that keep the gate alive in salt air cost a little more, and they’re priced into the quote from the start.
Yes. The 90-Day Done Right Promise is written into every invoice, full stop, whether you live on Marco year-round or spend summers up north. If something we installed isn’t right, one call brings us back to make it right. No fine print, no runaround. Call (877) 610-2993 any time.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Marco since 2001.





Before
After
Before
After
Before
After