Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Lyndon
A full gate installation in Lyndon, KY typically runs $2,800-$7,500 for a standard driveway gate with operator, and most jobs are quoted, ordered, and scheduled within two to three weeks. If you’re wondering whether that old wrought iron gate off La Grange Road is worth saving, the honest answer depends on the posts, the panel, and the operator. Call (877) 610-2993 and we’ll walk the property, talk straight about what needs replacing, and hand you a written price before anything gets ordered.
We’ve been working Gate Installation jobs across Lyndon long enough to know which gates on which streets were hung when. Not because we read a chart. Because we’ve opened them, welded them, and sometimes had to tell a homeowner the truth: this one’s done.
Why Gatewood Fence & Gate Is Lyndon’s Preferred Gate Installation Company
Hal Gatewood has owned and operated this company since 2001. His name is on the shop, his number is on the invoice, and when a Lyndon homeowner calls with a gate that won’t open, a live person answers. Not a queue. Not a robot. That matters when it’s 6 a.m. and your gate is stuck across the driveway and you’ve got to get to work.
We’re local in a way that matters here. The 40222 ZIP is full of ranch and colonial homes built between the late 1940s and the 1980s, and a lot of them still wear their original ironwork. We know what those gates looked like new, what they look like after thirty Jefferson County freeze-thaw cycles, and what it takes to make them right again. When we quote a gate in Lyndon, we’re quoting for Lyndon soil, Lyndon tree canopy, and Lyndon winters. Not a generic national average.
Our crew has been on properties off Ormond Road, down toward New La Grange Road, and through the quiet side streets of Hurstbourne and Lyndon proper. Same familiar story each time: posts that have moved in the clay, gates that bind, and operators that gave up quietly. We do the work on site, including the welding, so your gate doesn’t leave your driveway. And every job carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. That’s the whole promise, stated plainly.
Our Gate Installation Services in Lyndon
Driveway Gate
A driveway gate in Lyndon is typically a swing or slide panel on a 12- to 20-foot opening, hung on posts set in Jefferson County’s expansive clay. That clay is the thing to plan for. Footings need to go below frost depth and account for heave, or within three seasons the gate binds and the opener strips a gear. We handle new steel, aluminum, and composite driveway gates, and we’ll tell you honestly whether your existing panels are worth hanging on new posts or too far gone to save. Most Lyndon driveway gate installations run $3,500-$7,500 including operator and basic safety edges, depending on panel size and automation.
Pedestrian Gate
Pedestrian gates around Lyndon backyards and side yards are often paired with perimeter fencing and need a different approach than a driveway gate. Lighter panels, smaller posts, but the same clay movement underneath. A pedestrian gate in Lyndon with a quality hinges and a magnetic latch typically runs $900-$1,800 installed. We often install these to match existing fence lines, which keeps sightlines clean from the street and the back patio.
Sliding Gate
Sliding gates make sense on Lyndon lots where the driveway slopes up toward the house or where an inward or outward swing would clip a tree or the garage. But a slider sits on a track, and track alignment on clay is unforgiving. A new sliding gate for a Lyndon driveway typically runs $4,200-$8,500 with operator, steel frame, and covered track guards. We like FAAC and BFT slide operators on these projects because they hold up to repeated ice-thaw cycling better than some smaller-motor options, and we stock common parts locally so a board swap doesn’t strand your gate for a week.
Swing Gate
This is the workhorse gate in Lyndon. The older neighborhoods, especially off La Grange Road and Lyndon Lane, are full of double and single swing gates on ornamental iron or aluminum panels. Swing gates are simpler mechanically, but the hinge posts take a beating from both freeze-thaw cycles and decades of opening force. We are very particular about hing post depth here. A single swing gate in Lyndon runs $2,800-$5,800 installed with operator; a double gate with two new iron panels and matching automation runs $5,500-$9,500. And yes, we still take the old panels in the driveway and weld new hinge mounts on site.
Double Gate
The classic Lyndon double gate opens from the center, one leaf to each side. When it’s straight, it’s the stateliest gate on the block. When the posts have moved even an inch, the leaves meet wrong, the locks don’t align, and the opener drags. A new double gate in Lyndon requires both posts set square and plumb, the center closing point shimmed to allow for panel flex, and two synchronized opener arms or a single underground operator depending on the layout. Double gate installations in Lyndon generally run $5,000-$9,500, with the upper end covering larger ornamental panels and masonry columns.
Security Gate
Security gates aren’t the same as decorative driveway gates. I’m talking about a gate you can stand at and know it won’t be lifted off its hinges by two men with a pry bar. Security gates in Lyndon use reinforced frames, welded stainless pin hinges, tamper-proof operator covers, and magnetic locks or keypad access. We build these from steel, not aluminum, and we set posts deeper with more concrete than a decorative install would get. A Lyndon security gate with reinforced posts and keypad entry typically runs $6,000-$11,000 depending on opening width and whether you add intercom or camera wiring. This is the category where we see the most “somebody bolted a flimsy gate to thin posts and called it security” work. Hal gets annoyed by that.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lyndon
We’re certified to service nine major gate brands, and around Lyndon the ones we see most often on older properties are FAAC, BFT, Linear, and Viking. When a control board fails on a 15-year-old Viking slide operator, it’s usually faster and cheaper to swap the board than to replace the whole machine. We carry a working stock of the most common parts for these brands, so if we’re on your Lyndon driveway and the diagnosis is a bad limit switch, repairs can often happen the same visit, not in two weeks when a part ships from somewhere else. For new installations, we’ll match the operator brand to the type of gate, the panel weight, and the fact that Lyndon gets ice, not just cold.
Common Gate Installation Problems We See in Lyndon Homes
- Hinge posts leaning from clay heave. Every winter, water in the clay soil under Lyndon driveways freezes, expands, and pushes posts slightly. Over ten or fifteen winters, a quarter-inch becomes an inch and a half, and a swing gate that shut perfectly now drags or won’t latch. The fix is resetting the footing, not shimming the hinge.
- Ice loading bending top rails. When freezing rain piles ice on an ornamental iron panel, the added weight does things a gate was never designed to carry. We see gates in Lyndon with the top rail visibly bowed after one bad January storm. If the steel’s not too fatigued, we can often straighten and reinforce. If it’s cracked at the welds, replacement is the cheaper long-term answer.
- Legacy operators lacking entrapment protection. A 1980s gate opener has no UL 325 entrapment sensors. That means if a child, a pet, or your neighbor’s car is in the gate’s path, the gate doesn’t know. Modernizing to a current operator with photocells and contact edges isn’t just about building code; it’s about not having a gate that hurts somebody.
- Tree limbs taking out panel corners. The mature hardwood canopy over Lyndon’s long driveways is beautiful until an ice storm puts a 30-pound limb across a gate corner. We’ve repaired more than a few top-corner bends on New La Grange Road properties, and we’ve told a few homeowners honestly that the panel survived, but the original hinge post was now leaning past saving.
Pricing for Gate Installation in Lyndon, KY
Here are the price ranges you can expect for gate work in Lyndon. These reflect local labor, concrete and steel costs, and the reality that 40222 is a mature, established market where many projects involve removing and disposing of an old gate before installing the new one.
- Pedestrian gate: $900-$1,800
- Single swing driveway gate with operator: $2,800-$5,800
- Double swing gate with two panels and automation: $5,500-$9,500
- Sliding driveway gate with operator: $4,200-$8,500
- Security gate with reinforced posts and keypad: $6,000-$11,000
- Full replacement of an existing Lyndon driveway gate including post reset and new operator: $4,000-$8,500
Every job is quoted in writing before any work starts. The price we agree on is the price you pay. We don’t show up with a different number because we “found something.” What we find, we quote. If you already have a written estimate from another company, bring it to us and we’ll give you a free second opinion on whether that work needs doing at all. That’s a standing offer with no catch.
We Also Serve Cities Near Lyndon
While this page is written for Lyndon homeowners, we regularly work in Saint Matthews, Douglass Hills, Middletown, and Buechel too. If you’re just over the line in any of those areas, the same crew, the same written pricing, and the same 90-Day Done Right Promise applies. Read more about Gate Installation in Lyndon or call us directly for a straight answer about your gate.
Serving Lyndon, KY - Our Local Coverage Area
We’re based in the Lyndon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Lyndon
Lyndon’s clay soil expands when wet and shrinks when dry, which means a gate post set in too-shallow concrete will heave upward out of the ground within a few winters. For any new post supporting a swinging or sliding gate, we dig below frost depth, set the post full-depth in concrete, and where the driveway has shown past movement, we’ll use a larger footing than a decorative post would need. That’s not a sales pitch. It’s the difference between a gate that’s square in year one and one that’s square in year ten. Call (877) 610-2993 and we’ll tell you what your specific post bases need.
Sometimes yes, sometimes no. If the mechanical drive is sound and the gate panel is square, we can add UL 325 compliant photocells, contact edge sensors, and a current control board to bring an older operator up to modern safety standards. If the gearbox is worn and the motor is tired, adding safety sensors to a tired machine is throwing money at a problem. In those cases we’ll quote you a modern operator matched to your gate and be straight about why. Estimates are free.
The mature tree canopy over Lyndon driveways doesn’t just provide shade. During Ohio Valley freezing rain events, ice accumulates on the limbs and they shed onto whatever is under them. A heavy, ice-coated limb coming down on a 40-year-old ornamental iron gate will bend the top rail, and if the impact is hard enough, it cracks the welds at the pickets too. We see this most often on the older 40222 streets off La Grange Road where the trees predate the gates. We can often straighten a bent top rail if the steel hasn’t cracked; if it has, we’ll show you the break and let you decide between certified repair and full replacement.
Start by standing at the open end and looking down the track. If the track bed has heaved and the gate rides on one wheel at the far end, you’ll see a gap under the panel that widens toward the middle. That’s a track problem. Next, check the post the gate slides toward. In Lyndon, those posts often lean back a few degrees, and the gate then doesn’t seat fully in the closed position. If the gate is sliding but scraping or stalling on the track, don’t keep trying to force it; that can strip the rack gear and cost you an operator on top of the track work. Call us and we’ll check all of it.
Most of the time, no. Lyndon’s canopy is one of its best features, but solar panels need consistent sun to keep a gate battery charged through the winter. A panel shaded by a mature oak for half the day isn’t going to keep up with an operator that runs eight or ten times a day. For a low-use pedestrian gate in a sunny spot, a solar kit can work. For a driveway gate in 40222, we typically recommend a low-voltage wire run from the house or garage. It’s more reliable and it doesn’t care how many leaves you’ve got. Call (877) 610-2993 for a straight recommendation on your specific property.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lyndon since 2001.