Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Louisville
Gate installation in Louisville runs from about $1,200 for a basic single swing gate to $6,500 and up for an automatic sliding gate with operator, safety photocells, and custom ironwork. Most jobs land between $2,800 and $4,800, and we quote the full price before any work starts. If your driveway is tight, your posts are old brick, or you need vehicle and pedestrian access working throughout the job, you want a crew that works Louisville lots every week, not a truck sent from three counties over. Call (877) 610-2993 and you’ll get a live person, not a recording.
Why Gatewood Fence & Gate Is Louisville’s Preferred Gate Installation Company
Hal Gatewood has been owner-operated since 2001 and his name is on the shop. That matters in Louisville because gate work here is not plug-and-play. You need someone who knows that a swing gate on a shared driveway off Baxter Avenue might hit the neighbor’s wall if the setback is not verified first. You need someone who has welded on site in the Highlands, who understands that original 1880s brick pillars in Old Louisville need a mason before a hinge gets hung. You need someone who will answer when you call at 9:40 on a Saturday night because your gate quit mid-cycle and your car is stuck. A live person answers every call, 24/7. Not a voicemail. Not a call center three states away.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround. That is not a marketing line. It is stamped on the invoice.
Our Gate Installation Services in Louisville
We install and service driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates throughout Louisville. Here is how we approach the jobs we see most often.
Driveway Gate Installation
A driveway gate in Louisville is often the primary privacy barrier, especially on those narrow central-city lots where the house sits close to the street. We install single and double driveway gates, set posts in concrete footings sized for our freeze-thaw cycle, and run operators when you want automation. For a driveway gate on a shared right-of-way, we verify the property line before we dig. That step alone has stopped more than a few neighbor disputes.
Pedestrian Gate Installation
Pedestrian gates in Louisville’s older neighborhoods usually hang from brick or stone pillars that have been there since the Roosevelt administration. We build pedestrian gates that match the scale of the property, set new steel posts where the old ones have rotted, and when the pillars are original, we assess the mortar before we attach anything. A gate that sags in the hinge post, not in the middle, and that is where we start.
Sliding Gate Installation
Sliding gates are the right answer for a lot of Louisville driveways, especially on Grinstead Drive, Frankfort Avenue, or anywhere the driveway slopes up from the road. A swing gate needs room to arc; a sliding gate runs on a track or cantilever rail along the fence line. The catch: a sliding gate is only as good as its post footings. We pour them below frost line, because a post that heaves in a Louisville winter throws the rack and pinion out of alignment by spring. We see that failure on gates installed by out-of-town crews every year.
Swing Gate Installation
Swing gates remain the most popular style in Louisville, and for good reason. They’re simple, they’re quiet, and they fit the look of an older brick home. We build single and double swing gates in steel, aluminum, and wood-frame, and we match the hinge hardware to the load, not to what is cheapest on the shelf. On a tight lot in St. Matthews or Clifton, we check the full arc before we set the first post. Show us a gate closing on its own and we’ll show you where it’s failing.
Double Gate Installation
A double gate is two panels meeting in the middle, and the detail work is entirely in the center alignment. Louisville’s freeze-thaw cycling shifts the ground enough that a double gate installed without adjustable hinges will bind by the second winter. We install double gates with adjustment built into the hardware, and when both panels carry an operator, we sync them so one opens first and closes last, or both together depending on the site. We also install double gates as a single panel on a sliding frame where the driveway is too short for two leaves to swing.
Security Gate Installation
Security gates in Louisville are usually about access control, and the control side is where we spend the most time. We install security gates with keypads, card readers, and telephone entry, and we run the operator wiring in conduit sized for future upgrades. For a security gate on a commercial lot in the Buechel industrial corridor, we coordinate the install so the tenant’s trucks are never locked out. That coordination is the actual job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Louisville
We are certified to service nine major gate brands, and for Louisville customers that means something practical: we keep parts on hand for the openers we see most often in this market. Linear and DoorKing operators are common on older Louisville properties, and Viking is popular for newer sliding gate installs. When you need a board, a receiver, or a photocell, we’re not waiting a week on freight. We stock what Louisville doors need.
Common Gate Installation Problems We See in Louisville Homes
These are not hypothetical. We have seen every one of these in Louisville, and most of them more than once.
- Undersized concrete footings. Louisville’s freeze-thaw cycle works the ground all winter. A post set in an 18-inch hole will heave by year two. We pour 36 to 42 inches, below frost line, for every gate post in Louisville.
- Swing gates hitting walls on shared driveways. On a shared driveway off South Third Street in Old Louisville, the setback between the gate and the neighbor’s wall can be less than a foot. If the installer never checks the property line or the full arc, the gate slams into brick. We verify before we build.
- Heavy steel hung on old brick pillars. We have seen brand-new steel gates hung on original 1880s brick pillars where the mortar was powder behind the face brick. The pillar spalled under the load. If your pillars are original, we bring a mason to assess them before the first hinge is hung. A local gate installer knows this; an out-of-town crew learns it on your dime.
- Operators mounted on posts that move. A sliding gate operator mounted on a post that shifts a half inch in the winter will throw the rack and pinion out of alignment and chew up the gate. In Louisville, that half inch happens. We mount operators on posts set in the same deep footings as the gate itself.
Pricing for Gate Installation in Louisville, KY
Here are honest numbers for the Louisville market. A single swing gate in steel typically runs $1,200 to $2,800 including posts, hinges, and labor. A double swing gate runs $2,200 to $4,500, depending on width and whether you want automation. A sliding gate starts around $2,800 for a basic track system and goes to $6,500 or more for a long cantilever gate with an operator. Adding a LiftMaster, Linear, or DoorKing automatic opener typically adds $900 to $2,200 including safety photocells and entrapment protection. On a historic Old Louisville property where we are rebuilding stone or brick pillars, masonry work adds to the gate install, and we bring in a mason we have worked with for years. Every estimate is free, and the price we quote is the price you pay. No trip charge inside the county. Veterans and seniors get a permanent 10% discount.
We Also Serve Cities Near Louisville
Besides Gate Installation in Louisville, we run installs in Buechel, Newburg, Saint Matthews, and Okolona most weeks. If you are in one of those neighborhoods or just across the line into Jefferson County, call us and we will schedule a free measure. The same crew, the same warranty, the same person answering the phone.
Focus: Tight Lots and Historic Gates in Louisville
Old Louisville, concentrated in the 40203 and 40208 ZIPs, is one of the largest intact Victorian preservation districts in the United States. That is not a trivia line. It means we regularly install and restore gates on original 1880s to 1910s cast iron and wrought iron estate gates. The original hinges on those gates are often forge-welded into hand-laid brick pillars, which means a hinge replacement can require a mason working alongside the welder. It is a two-trade call that surprises out-of-town contractors but is routine for a local Louisville gate company. The demand for period-appropriate ironwork at this scale does not exist in Cincinnati or Indianapolis. Here, it is a standard Tuesday.
A few months back, we worked on a shared driveway off South Third Street in Old Louisville. We installed a double swing gate with a LiftMaster operator and safety photocells, but the real work had already been done before the gate went up. We rebuilt the stone hinge posts, set new footings below frost line, and hung the historic wrought iron panels so that both residences kept full vehicle and pedestrian access during the entire install. That is the actual job on this kind of site. The gate matters. The clearance matters. The right of way matters. And the 1890s ironwork has to still look like 1890s ironwork when you are done.
Serving Louisville, KY - Our Local Coverage Area
We’re based in the Louisville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Louisville
Yes. We install sliding gates on Louisville lots where the driveway is too short or too narrow for a swing gate to arc safely. A sliding gate runs along the fence line instead of swinging out, so it works on tight lots in the Highlands, off Frankfort Avenue, and on shared driveways where a swing gate would clip the neighbor’s wall. The trade-off is the post footings, and we pour them deep enough for Louisville winters. Call (877) 610-2993 for a free measure and we will tell you if your lot can carry a sliding gate and what it will cost.
Yes. Every automatic gate we install in Louisville meets UL 325 entrapment protection standards, including monitored safety photocells, contact edges where the site calls for them, and a manual release that works from both sides. We do not install an operator without entrapment protection, period. That is not an upsell; it is the code, and it is the right thing to do. Call (877) 610-2993 and we will quote your automatic gate with all safety equipment included in the price.
Sometimes, but not without assessing the pillars first. Original brick pillars in Old Louisville often look solid from the outside and have powdered mortar hidden behind the face brick. We bring a mason with us to check the pillar condition before we hang anything. If the pillars are sound, we hang the gate with hardware sized to the load. If they are not, we rebuild them properly, and the gate goes up after the masonry work is done. That sequence matters. Hanging a heavy gate on unsound pillars is how you crack a century-old pillar. Call (877) 610-2993 and Hal will look at your pillars in person.
Yes, in almost every case. We stage the work so your driveway is never fully blocked for more than a short window, and if you have a pedestrian gate, we keep it functional while the vehicle gate is being built and hung. On a shared driveway, we coordinate with both homeowners before we start, so nobody comes home to a driveway they cannot use. This is part of the job on tight Louisville lots, and we have been doing it since 2001. Call (877) 610-2993 and we will lay out the install schedule in plain English.
Yes. Louisville gets enough sun for a properly sized solar gate opener on most lots, and we install solar systems from Viking, Ghost Controls, and Linear. The key is sizing the battery for Louisville’s cloudy winter weeks, not just for a sunny July. We size the panel and battery for the worst month of the year, so your gate opens in February. If you are thinking about a solar opener for a gate with no power run, call (877) 610-2993 and we will tell you if it is practical for your site and what it costs.
Call Gatewood Fence & Gate for Gate Installation in Louisville
If you need a gate installed in Louisville, call (877) 610-2993. You will get a live person. You will get a straight answer about whether your lot needs a swing gate or a sliding gate, whether your original pillars can carry the weight, and what the whole job costs. No estimate changes at the door. No trip charge inside the county. The name is on the shop, and the shop is down the road, which is the oldest accountability there is.
Written by the team at Gatewood Fence & Gate, serving Louisville, KY.