Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Lakeway
A new driveway gate in Lakeway typically runs $2,800 to $9,500 depending on whether you’re looking at a single swing panel, a sliding gate, or a solar-powered opener on an acreage property. We install, program, and test the whole system, and we quote the price before any work starts. Call (877) 610-2993 and you’ll get a live person on the line, not a queue.
We know Lakeway. The limestone, the HOAs, the long driveways off Hamilton Pool Road where grid power is a half-mile away and the cedar pollen is thick enough to clog a photo-eye by February. Hal Gatewood has been at this since 2001, and when you call, you’re talking to someone who understands what a gate has to do out here on the Hill Country edge.
Why Gatewood Fence & Gate Is Lakeway’s Preferred Gate Installation Company
Ninety percent of what we do in Lakeway is work that another company either left half-finished or priced like a full replacement when a repair would have done the job. That’s not how we operate. We weld on site, we fix what’s broken, and we don’t swap parts that don’t need swapping. Our Gate Installation team measures, fabricates, and mounts every gate to the post and the terrain, not to a catalog photo.
Hal’s name is on the shop and on every invoice. Our address is public, our license is public, and our phone gets answered by a human at 2 a.m. the same way it does at noon. Every job, install or repair, carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No runaround.
Crews serve Lakeway out of our Austin office, but the work itself is local. We know the difference between a Serene Hills entrance on a binding HOA schedule and a ranch gate off a county road that just needs to hold up to a stiff north wind. That context changes how we size the operator, set the footings, and run the power.
Our Gate Installation Services in Lakeway
Driveway Gate Installation
Most driveway gates in Lakeway are ornamental steel or wrought iron, paired with a keypad, intercom, or camera system. We fabricate the frame to match the opening, set hinge and latch posts in concrete or core-drilled limestone, and wire the operator so it opens without sagging or stalling. For the wider openings on acreage lots, we step up to heavy-duty swing or slide operators built to cycle in hundred-degree heat without burning out.
Pedestrian Gate Installation
Pedestrian gates get treated as an afterthought all the time, and then the latch binds or the post leans within a year because nobody set a deep enough footing. We core drill through Lakeway limestone where a standard auger would stop at eight inches, then set the post plumb and true. The gate should swing on its hinges, not scrape the latch because the post moved three degrees.
Sliding Gate Installation
Sliding gates make sense for Lakeway driveways with a slope or a tight turnaround. We hang the gate on a steel track with the right roller trucks for the weight, and we pay attention to what the Hill Country air carries. Cedar pollen packs into rack-and-pinion tracks every January and February, so we set the track height and guard placement with that in mind from day one, not as a callback.
Swing Gate Installation
Swing gates are the standard here, single or double panel, usually with a linear arm or underground operator. On a long, wide opening one bad hinge-post footing ruins the whole installation. We core drill and set pier footings that reach below the limestone shelf, then align the panels so they meet clean without the operator fighting the load. Show me a gate closing on its own and I’ll show you where it’s failing. Ours don’t.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lakeway
We’re certified on the systems Lakeway builders and HOAs actually specify: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For solar applications on acreage lots, we lean toward Ghost Controls, Linear, and Viking operators, they hold up to Hill Country heat better than most. We keep the common boards, arms, and photo-eye parts on the truck, so a brand-new Linear operator doesn’t sit disconnected for a week while we wait on a shipment.
Common Gate Installation Problems We See in Lakeway Homes
- Limestone post failures: Installers who try a standard auger footing on Hill Country limestone hit rock, quit early, and set posts shallow. Six months later the gate sags. The hinge post is the whole game. If it moves, the gate moves. We core drill and set pier footings that go deep enough to actually hold.
- Phantom obstruction faults from cedar pollen: Ashe juniper pollen is waxy, dense, and everywhere from January through March. It coats photo-eye lenses and packs slide-gate tracks. We install guards, position sensors away from the pollen path, and use sealed housings where possible. The gate doesn’t fail because it’s broken; it fails because it can’t see through the pollen.
- HOA access-control mismatches: Rough Hollow, Serene Hills, Lakeway Highlands, every one of them runs a master gate software package. A new keypad or intercom that doesn’t sync with the subdivision controller locks out half the street. We test against the HOA’s card reader protocol before we leave, not after a resident can’t get in at 6 p.m.
- Undersized solar operators on long driveways: A solar kit sized for a 10-foot gate won’t cycle a 16-footer on a cloudy week, and then the battery drains and the gate stays shut. We calculate panel wattage against gate weight, cycle count, and Hill Country sun angles. If grid power isn’t feasible, we size the solar system to actually run the gate, not just to pass an inspection photo.
Pricing for Gate Installation in Lakeway, TX
| Gate Installation Service | Typical Lakeway Price Range |
|---|---|
| Single swing driveway gate, steel or aluminum | $2,800 - $5,200 |
| Double swing driveway gate | $4,500 - $9,500 |
| Cantilever sliding gate, fabricated and installed | $5,500 - $11,000 |
| Solar gate opener package (panels, battery, operator, brackets) | $1,600 - $3,400 |
| Core-drilled post footings (per post, limestone) | $350 - $700 |
| Pedestrian gate with hardware and post | $950 - $2,300 |
Those are real numbers for Lakeway, where limestone core drilling and HOA compliance add cost that a flat-lot Austin suburb never sees. The price you get up front is the price on the invoice. We agree on the number before any work starts, and the estimate is free. If you already have a written estimate from someone else, bring it to us. Hal will give you a free second opinion and tell you honestly whether it’s fair.
Seniors and veterans always get 10% off, and there’s no trip charge inside the county. If your installation runs over $200, you’ll see $40 off automatically.
We Also Serve Cities Near Lakeway
If you’re just outside Lakeway city limits, we work those roads too: Bee Cave, Lago Vista, Shady Hollow, and Austin. Same crew, same pricing, same 90-Day Done Right Promise on every job. Call (877) 610-2993 and tell us which side of the county line you’re on.
Serving Lakeway, TX - Our Local Coverage Area
We’re based in the Lakeway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Lakeway
Yes, in virtually every Lakeway subdivision with an HOA-governed entry, Rough Hollow, Serene Hills, Lakeway Highlands, and the older sections around Lakeway proper all require board or architectural committee approval before gate installation. Most HOAs want design drawings, operator specs, and sometimes a site plan showing the gate’s swing arc. We can prepare the submittal packet for you, but approval comes from the HOA board. Budget a week or two for review before we dig any footings. Call (877) 610-2993 and we’ll walk you through what your specific HOA asks for.
Yes, if the panels are sized for winter, not just for a bright July afternoon. Cedar pollen coats solar panels in a waxy film that cuts output anywhere from 15% to 40% during peak pollen months, and shorter winter days already limit charge time. We oversize the panel array by at least 20% for Lakeway installs and use sealed photo-eye housings so pollen doesn’t trigger phantom obstruction faults. If your existing solar gate quits every February, it’s almost always cedar pollen on the panel or the sensor lens. Call (877) 610-2993 and we’ll diagnose it on site.
We can. Limestone is the default substrate in Lakeway, not the exception. A standard auger on a skid steer stops dead at shallow rock, and too many installers just pour a shallow footing and call it done. We use a core drill with a water feed and a rock bit to open post holes to depth, then set the post in concrete so it locks into the stone. A 16-foot solar gate on a long driveway needs post footings that reach below the limestone shelf, not sit on top of it. That’s standard practice for us, not an upcharge surprise.
For a wide farm gate, a ram-style linear actuator or a heavy-duty slide operator usually wins over a small residential swing arm on a long panel. The gate off Hamilton Pool Road tends to be wider and heavier than what a suburban driveway ever demands, and the wind load on a solid panel is serious. We typically spec a Ghost Controls or Linear ram for solar swing gates in that range, with a battery bank sized for cloudy stretches and a loop detector for exit triggering. The operator has to match the gate’s weight and the cycle count, not just look strong in a catalog photo. We measure, we spec it, and we stand behind it for 90 days minimum.
We can. We installed a 16-foot solar-powered swing gate in Lakeway Highlands with a LiftMaster operator and a loop detector, on a long limestone driveway where running grid power would have meant trenching 300 feet through solid rock. We core-drilled the hinge-post footings, mounted the solar array where winter sun hits it, and added a safety photocell pair before the HOA inspection. The gate runs every cycle, every season. If you’re off the grid, call (877) 610-2993 and we’ll spec the system for your exact gate weight and driveway exposure.
Get a Free Estimate for Gate Installation in Lakeway
When you’re ready, call (877) 610-2993. You’ll get a real person, and if Hal’s not on another job, you’ll get Hal. We’ll come out, measure, look at the limestone, look at the sun exposure, and give you a written price. No games, no phone estimate that triples at the door. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is, and it’s how we’ve done it since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lakeway and the surrounding Hill Country since 2001.