Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Lakeway
Gate access control in Lakeway isn’t like work in the flatter parts of Travis County. Most homes here sit inside HOA-governed subdivisions where the entry gate needs board approval before you change a keypad, add a phone entry system, or mount a video intercom. We get that, because we’ve worked inside Rough Hollow, Serene Hills, Lakeway Highlands, and the older custom lots off Lakeway Boulevard since the early 2000s. If your gate opener quit this morning or your HOA is asking for documentation before you upgrade, call (877) 610-2993 and a live person picks up. Every time.
Why Gatewood Fence & Gate Is Lakeway’s Preferred Gate Access Control Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop. That’s not a slogan. When a Lakeway homeowner calls us about a keypad that stopped accepting codes at 9 p.m., the person who answers is someone who can actually help, not a call center three states away. We schedule a real window and the person who shows up knows what they’re doing and better yet, knows what they’re looking at.
Lakeway customers keep calling us back because we repair before we replace. A builder-grade operator that burns out its control board on a hundred-degree day doesn’t always need a whole new unit. Sometimes it needs a board, a heat shield, and a service call from someone who doesn’t upsell. We weld on site. We run new conduit correctly. We don’t haul your gate off to some shop across the county. The 90-Day Done Right Promise is in writing on every invoice: if it’s not right, one call brings Hal back. No runaround.
We’re licensed, insured, and bonded. Our published address means you could drive to the shop and look us in the eye, even though we come to you. In Lakeway specifically, we carry parts for Viking, DoorKing, and Ghost Controls operators on the truck, because those are the brands we see most often on the custom homes around Lake Travis.
Our Gate Access Control Services in Lakeway
Most Lakeway homes need more than a remote that opens a driveway gate. They need keypads that talk to an HOA system, phone entry that works when the gate is 300 feet from the house, and video intercoms that hold up through cedar fever season. Here’s what we handle most often.
Keypad Entry
A keypad mounted on a limestone column in Lakeway is a different job than one bolted to a wooden fence post in a 1960s Austin neighborhood. Limestone requires core drilling and epoxy-set anchors, never sleeve anchors that crack the stone. We install and program keypad entry systems that survive summers over 100°F, and we’re careful to coordinate codes and access levels with your HOA’s requirements when the gate serves multiple homes or a shared entry.
Remote Control
Adding remote control to a gate that was installed manual is common in Lakeway, especially on older custom lots where the original build never included wiring. We handle the full conversion: operator mounting, power run, safety loops, and programmed remotes that actually work from inside your car, not just standing next to the keypad. Ghost Controls and Viking remotes are the ones we program most often out here.
Phone Entry
Phone entry is the backbone of most Lakeway subdivision entry systems. Visitors pull up, scroll to your name, and the system calls your cell or landline. When phone entry fails, it isn’t usually the handset. It’s the wiring, the relay, or the operator’s communication board. We troubleshoot the whole chain from the call button to the gate arm and document everything for your HOA if needed. We service DoorKing phone entry systems regularly in the Rough Hollow and Lakeway Highlands areas.
Card Reader
Card readers and proximity fobs keep pedestrian access controlled without handing out codes to every contractor, pool guy, or landscaper. For Lakeway HOAs running multiple entry points, we can synchronize card readers with existing phone entry and keypad systems so one credential works at every gate in the community. That matters when board members and residents are waiting on a fix that has to keep working for everyone, not just one house.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lakeway
We’re certified to service more than nine major gate brands, and in Lakeway the ones we see day in and day out are Viking, DoorKing, and Ghost Controls plus LiftMaster operators on newer builds. Because Lakeway is geographically isolated from the main parts stocking warehouses in central Austin, a repair that needs a specific board or relay can stall for days if your company doesn’t carry parts. We keep common components for these brands on our trucks when we come out to Lakeway, so most access control repairs are done in one trip, not three.
Common Gate Access Control Problems We See in Lakeway Homes
- Builder-grade operators failing early. New construction gates in Lakeway subdivisions often ship with the cheapest operator the builder could spec. On consecutive 100°F days, those control boards overheat and burn out, sometimes within the first two summers. We replace the board, add ventilation where possible, and if the operator is truly undersized, we tell you straight instead of patching it until the next heat wave.
- Cedar pollen phantom faults. Every January and February, Ashe juniper blankets the Lakeway corridor with dense, waxy pollen. It packs into slide gate track channels and coats safety photocell lenses until the gate stops, reverses, or refuses to close at all. We see this constantly during cedar fever season, and the fix is cleaning, not a new operator. But skip the cleaning and the board will burn out trying to push against a jammed track.
- Undersized post footings on manual-to-automatic conversions. Lakeway sits on Hill Country limestone. When a builder set a gate post without automation in mind, the footing is often too shallow and too small for the torque of a swing operator. We core drill into the rock or pour a pier and grade beam before mounting the motor, because mounting an operator on a shifting post means you’ll fix it twice.
- HOA systems with mixed hardware. A single Lakeway subdivision entry might combine a phone entry panel from one brand, a keypad from another, and a slide operator from a third. When one piece stops talking to the others, most companies replace everything. We trace the wiring, identify the failed component, and replace only what failed. That’s the repair-first difference, and it saves Lakeway HOAs thousands.
Pricing for Gate Access Control in Lakeway, TX
Plain numbers, because you deserve them before you call. A keypad entry installation in Lakeway typically runs $450 to $900, depending on whether we’re drilling into limestone or mounting to a steel post with existing conduit. Phone entry system replacement runs $600 to $1,200 for the unit and wiring, and adding a video intercom usually lands between $900 and $2,100 depending on whether we’re running new cable, adding a power supply, or integrating with an existing gate operator. Remote control conversion on a manual gate starts around $1,100 and goes up with operator size, post work, and safety loops. Every price is quoted and agreed before any work starts, in writing. You’ll know the number before we touch a tool, and that number doesn’t change at the door. We never charge a trip fee inside the county, and we take $40 off any repair over $200. Seniors and veterans get 10% off, permanently.
We Also Serve Cities Near Lakeway
Our crews work throughout the Hill Country corridor around Lakeway. If you’re in Bee Cave, Lago Vista, Shady Hollow, or Austin proper, we handle Gate Access Control jobs there too, with the same written pricing and the same 90-Day Done Right Promise. And if you’re in Lakeway and reading this, we’re already in your neighborhood this week.
Serving Lakeway, TX - Our Local Coverage Area
We’re based in the Lakeway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Lakeway
Yes. We provide written descriptions of the proposed work, brand and model specifications, photos of comparable installations, and a written scope of work your board or architectural review committee can evaluate. Many Lakeway HOAs want to see that the operator is properly sized, safety loops are included, and wiring methods meet current code. We’ve navigated this process in Rough Hollow, Serene Hills, and Lakeway Highlands, and we’ll give you everything the board asks for. Call (877) 610-2993 and we’ll put together your documentation.
Cedar pollen is packing your slide track and coating your photocell lenses. Every January and February in Lakeway, Ashe juniper releases dense pollen that clogs the track channel where the gate rollers travel, and the operator’s control board senses the added resistance as an obstruction. It stops and reverses as a safety response. The photocells also get a waxy film that blocks the beam and triggers the same shutdown. We clean the track, wipe the lenses, and test the full sweep. If the board has been fighting pollen for weeks, we’ll inspect it for heat damage at the same visit. Call us before you replace the operator; most cedar-season failures are cleanable, not terminal.
Yes. We do this on a regular basis in Lakeway. A video intercom needs power and communication wiring, and on a gate that was originally manual, we either run new conduit from the house or use a solar-charged battery system with wireless video depending on the distance and terrain. Limestone bedrock can make trenching slow and expensive, so we’ll map out your best route before we quote. The camera, call button, and indoor monitor coordinate with your existing operator so you can see who’s at the gate and open it from inside. Written quote first, always.
Entrapment protection is the system of safety devices that prevents a gate from crushing or pinning a person or vehicle. It includes photo-eye sensors, contact edges, and the operator’s internal obstruction detection. Most modern Lakeway gates have at least one photo-eye and an operator with built-in current sensing, but older gates and many builder-grade installs are missing the required photo-eyes or have them wired incorrectly. A gate that reverses when it hits a trash bin isn’t necessarily safe. We check every entrapment device on every access control call we make in Lakeway, and we’ll tell you if your gate doesn’t meet current UL 325 safety standards. That’s the same standard the HOA should want documented.
We core drill with a diamond bit and set stainless steel anchors in epoxy. No hammer drills against the face, and no sleeve anchors that expand and crack the stone from the inside. Lakeway limestone varies, and the stuff around the lake can be brittle. We drill a clean hole, blow out the dust, inject the epoxy, and set the anchor. The keypad sits flush, sealed against moisture, with its wiring routed through the back of the column whenever possible. When the column is too narrow for a flush mount, we’ll use a surface mount with a stainless backplate and a clear caulk line. Every job gets a written quote before we drill.
If your gate access control in Lakeway has failed, is glitching through cedar season, or needs HOA-ready documentation, call (877) 610-2993. You’ll get a live person, a straight answer, and a written quote before any work begins. The 90-Day Done Right Promise means if it’s not right, we come back. That’s been the deal since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lakeway and the Hill Country corridor since 2001.