Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Glendale
Gate installation in Glendale runs $2,800 to $9,500 for most residential driveway gates, and pedestrian gates start around $900 installed. We’re Gatewood Fence & Gate, owner-operated since 2001, and we handle everything from a simple walk gate on a 1920s Spanish Colonial bungalow to a heavy sliding security gate on a Verdugo Woodlands hillside driveway. The phone rings to a live person, around the clock, at (877) 610-2993. Hal Gatewood will be the one who shows up to measure, and the one whose name goes on the invoice.
We know Glendale the way you know your own street. The 91207 and 91208 hillside zones, the flatland grid from 91201 to 91206, the masonry pillars that have stood since before automation existed. That matters, because a gate installed without understanding this city’s specific soil, wind, and fire-code requirements will fail early and cost twice. More on all of that below.
Key Takeaways
- Gate installation in Glendale typically costs $2,800-$9,500 for driveway gates; pedestrian gates start near $900.
- Hillside homes in 91207 and 91208 need Knox Box or emergency-release bypass mechanisms on automated gates - it’s fire code.
- Heavy decorative iron gates common in Glendale often outmatch their operators. Motor burnout is the #1 failure we correct on installs.
- We weld on site, stock parts for nine major brands, and back every job with a 90-Day Done Right Promise in writing.
- Estimates are free. The price we quote is the price you pay, agreed before any work starts.
Why Gatewood Fence & Gate Is Glendale’s Preferred Gate Installation Company
We’ve been fixing and installing gates since 2001, and around Glendale that track record shows. Homeowners here keep referral cards in kitchen drawers, not apps. The name on the shop is Hal Gatewood’s, the shop’s address is published, and the license number is on every invoice for anyone who wants to look it up. That’s the trust model in this city: you can drive to the shop and look the person in the eye.
Glendale customers don’t have patience for a national outfit that quotes one price on the phone and slides a different invoice across the table. We quote prices upfront, in writing, and they don’t move. Our Gate Installation team has torn out plenty of poor work done by out-of-town contractors in this area; crews who never reinstalled safety edges, or undersized an operator to hit a low bid, or bolted a gate to a post that was already leaning. Fix the panel without the post and you’ll fix it twice.
Every job gets the 90-Day Done Right Promise, stamped in writing, not buried in fine print. If it isn’t done right, one call brings Hal back. No runaround. We answer the phone 24/7 with a live person, not a machine and not a call center three states away. Background-checked, uniformed crew members on every Glendale job.
Our Gate Installation Services in Glendale
Driveway Gate Installation
Driveway gates in Glendale run the full range, from a 10-foot single swing gate on a flatland Mediterranean bungalow to a 20-foot sliding steel gate across a Chevy Chase Canyon driveway. The driveway slope changes everything. A gate on a 15% grade needs a heavier operator and a properly engineered track or hinge load path than the same gate on flat ground. We spec operators for the actual gate weight and the slope, not the brochure number.
Pedestrian Gate Installation
Walk gates around Glendale’s 1920s and 1930s neighborhoods are often hung on original columns that resemble postage stamps embedded in stucco. We install pedestrian gates with stand-alone steel posts set in fresh footings when the masonry isn’t up to the job, and we match the ironwork style so the new gate belongs to the house. Common configurations include self-closing spring hinges, keypad entry, and coordinating pedestrian doors built into larger driveway gate frames.
Sliding Gate Installation
Sliding gates make the most sense on Glendale’s hillside driveways where a swing gate would fight gravity or block the driveway on every cycle. Rack-and-pinion drives and wheel track systems dominate here. We install new cantilever and V-track sliding gates, and we regularly retrofit older chain-drive sliders that keep jumping track. A chain drive on a steep lot is a recurring service call; a rack-and-pinion conversion ends it.
Swing Gate Installation
Double swing gates with massive scrollwork are a Glendale signature. These are the gates that define the streetscape in neighborhoods like Verdugo Woodlands, and they demand the most from their post footings and hinges. We set new posts in concrete poured to depth, not shallow-set in a 1940s planter box, and we use commercial-grade hinges that carry the load without sagging. A gate sags in the hinge post, not in the middle; that’s where we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Security Gate Installation in Glendale
Security gates in Glendale get spec’d differently depending on the street. In the flats, owners want a visual barrier and controlled access. In the hillside WUI zones, a security gate also has to work with fire evacuation requirements. We install perimeter security gates with keypad, intercom, and vehicle detection loops, and we make sure every hillside automated gate gets the Knox Box or emergency-release bypass that fire code requires. That compliance detail is not optional, and it’s one we handle on every 91207 and 91208 job.
Trusted Brands We Service in Glendale
We’re certified to service nine major gate brands, including DoorKing, Linear, Viking, and Ghost Controls. Around Glendale, we most often see DoorKing and Viking on the hillside estates, Linear on flatland swing gates, and Ghost Controls on newer retrofit kits. Because we stock common boards, remotes, and limit switches for these brands locally, a Glendale repair or installation doesn’t wait on a parts truck from two counties over. If your operator is still under manufacturer warranty, we handle the claim paperwork so you don’t have to.
Common Gate Installation Problems We See in Glendale Homes
- Undersized operators on heavy iron gates. We routinely find residential operators spec’d for a 400-lb panel dragging an 800-1,200 lb decorative iron gate up a slope in Chevy Chase Canyon or Verdugo Woodlands. The motor burns out in 2-3 years. Upgrading to a commercial-rated operator is a recurring conversation here.
- Cracked 1920s-1940s masonry pillars. Original Spanish Colonial and Mediterranean pillars in flatland neighborhoods were never engineered for automated gate loads. Dynamic forces from an opener crack and pull the post away. The fix is new footings or post reinforcement, not caulk over the crack.
- Santa Ana wind damage on wide double gates. October and November wind events funnel down the Verdugo Mountains and slam unsecured or latch-worn gates hard enough to bend frames and strip hinges. Ornate double gates with heavy scrollwork catch the wind like sails.
- Flatland retrofit headaches. Running conduit for a gate opener on a 1930s bungalow often means going through original masonry, planter beds, and narrow side yards. We route conduit cleanly and use direct-burial rated cable where the path demands it.
A Field Vignette: Chevy Chase Canyon, November
On a sloped driveway in Chevy Chase Canyon, our crew replaced a Viking operator that had been spec’d for a 400-lb panel but was dragging an 1,100-lb decorative iron swing gate. We saw the same tell-tale signs: burned motor windings, a hinge post pulling out of a 1940s masonry pillar, and sag correction only addressed at the panel, never the post. The fix was a commercial-rated DoorKing operator, a new post footing poured to depth, and a Knox Box added to meet the hillside evacuation code. That job is a summary of what Glendale gate installation actually involves: weight, slope, age, and a fire code that doesn’t apply to Burbank or Pasadena flats.
Pricing for Gate Installation in Glendale, CA
Here’s honest money math for Glendale. A standard single swing driveway gate, steel or aluminum, with a residential operator and one keypad, runs $4,800-$7,500 installed. A double swing gate runs $5,500-$9,500 depending on width, ironwork complexity, and whether we’re rebuilding the posts. Sliding gates fall between $5,000 and $8,500, with hillside track systems at the upper end. Pedestrian gates start around $900 and top out around $2,200 for ornamental iron with a lock and closer. Security gates with intercom, camera integration, and commercial operators run $8,000-$14,000.
The quote you get is the price you pay. We walk the site, measure, check the posts, note the slope, and put the number in writing before any work starts. There’s no surprise upcharge at the door. Standing offers apply: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Glendale
Gatewood Fence & Gate serves the whole area around Glendale, including Burbank, La Cañada Flintridge, Echo Park, and Silver Lake. If you’re in one of those neighborhoods with a failing gate operator or leaning post, the phone number is the same: (877) 610-2993. We schedule across the area every week, and the 90-Day Done Right Promise travels with us.
Serving Glendale, CA - Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Glendale
It depends on the footing, not the crack. In most Glendale flatland neighborhoods, original masonry pillars were laid on shallow footings never meant for dynamic gate loads. If the footing is intact and the cracks are surface-level, we can core-drill and epoxy steel anchors into the mass and stabilize the pillar. If the post is leaning or the footing is cracked below grade, the honest answer is a new steel post set in a properly poured footing, then faced to match the original masonry. We’ll tell you which one applies, without charging for a guess. Call (877) 610-2993 and we’ll come look.
Yes. Glendale fire code requires a Knox Box or emergency-release bypass mechanism on every automated gate in the WUI zones, and Verdugo Woodlands (91208) is squarely in that zone. Emergency crews need to open your gate without delay during an evacuation. We install Knox Boxes and keyed mechanical bypass releases on every hillside gate we touch, and we check them as part of the 90-Day Done Right Promise. This is one of those details a flatland gate company from outside the area will miss.
Usually yes, on hillside driveways. Chain drives on sliding gates wear the sprocket and stretch the chain, and a steep driveway amplifies the wear. Rack and pinion is the standard for Glendale’s slope-heavy lots. The retrofit involves welding rack to the gate and swapping the operator to a rack-drive unit, which we do on site. If the gate itself is square and the wheels are good, the retrofit costs about half of a full replacement. If the frame is racked from years of jumping, replacement becomes the cheaper answer. We’ll show you the numbers for both before you choose.
Santa Ana winds funnel down the Verdugo Mountains and hit Glendale’s hillside and canyon neighborhoods in October and November. Wide, ornate double gates with heavy scrollwork catch the wind hard enough to bend frames, strip hinges, and tear out latch hardware. We install wind-rated hinges and latches on large gates, add drop rods where appropriate, and set posts deeper in wind-prone pockets. If you already have a gate that’s taking wind damage, a latch replacement and hinge upgrade often stops the seasonal damage before the frame itself bends.
In most cases, yes. The operator is the component that gets undersized in Glendale, not the gate. We swap the 400-lb residential unit for a commercial-rated operator matched to the actual weight and slope, and we keep your existing keypads, remotes, and safety edges where compatible. DoorKing and Viking both make commercial operators that fit the same post and power configuration. The gate itself only needs replacing if the frame is compromised. We’ll tell you honestly which it is after we measure. Call (877) 610-2993 for a free estimate.
Glendale’s Gate Reality: Retrofit or Replace?
Glendale has a gate stock unlike almost anywhere else in Los Angeles County. This city is home to one of the largest Armenian-American communities in the United States, and ornate, heavy custom wrought-iron and steel driveway gates are a deeply embedded cultural marker of homeownership here. Walk any block in the 91202 or 91206 flats and you’ll see gates with scrollwork and finials that took a blacksmith weeks to build. That gives Glendale a gate density and decorative complexity that sharply exceeds neighboring Burbank or Pasadena.
Now pair that gate stock with 1920s and 1940s construction. The flatland pillars were laid before automation existed. The hillside gates in Verdugo Woodlands and Chevy Chase Canyon were often added decades after the house, bolted to driveways that slope 12 to 18 degrees. Show me the gate closing on its own and I’ll show you where it’s failing. In Glendale, that failure is predictable: motor windings burned from a mismatch between gate weight and operator spec, or a hinge post pulling free from old masonry.
Here’s the decision logic we use on every Glendale estimate. If the gate frame is square, the posts are solid in their footings, and the automation is dead or undersized, we retrofit: new operator, new hinges, reinforced post brackets, safety edges, and Knox Box where required. That saves real money. If the posts are cracked below grade, the gate has sagged so long the welds are stress-fractured, or the track is warped, replacement is the cheaper answer over the next ten years. We’re not trying to sell new gates to people who need a $600 hinge job. Hal’s reputation in this city is built on saying “we can fix that” when other companies say “you need a new one.”
Call Gatewood Fence & Gate for Gate Installation in Glendale
If you need a new gate in Glendale, or you’re tired of patching an old one that fails every October when the Santa Anas arrive, call (877) 610-2993. A live person answers, 24/7. We’ll come out, measure, check the posts, check the slope, and give you a written price that doesn’t change. No pressure, no upsell. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Glendale since 2001.