Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fullerton
Gate installation in Fullerton runs anywhere from $1,400 for a basic single swing gate to $9,000+ for an automated double gate on a graded Sunny Hills lot. Most jobs land between $2,200 and $4,800, and we quote the full price in writing before any work starts. If you’re in the 92833, 92834, 92835, or 92836 ZIP and your gate is sagging, binding, or just tired, call (877) 610-2993 and a live person picks up. Hal Gatewood has been at this since 2001, and his name is on the shop and every invoice.
We work all over Fullerton, from the ranch-style tracts off Euclid Street to the hillside custom homes up in Sunny Hills. The person who answers your call is the same person who will show up at your driveway. That’s how we’ve always run it.
Why Gatewood Fence & Gate Is Fullerton’s Preferred Gate Installation Company
Fullerton is not a one-size-fits-all gate town. The housing stock splits hard between 1950s and 1970s ranch homes around the 92832 and 92833 ZIPs and the sloped custom builds up in the 92835 hills. We know both because we work both, every week. You will not get a trainee with a clipboard. You get Hal or one of his background-checked, uniformed crew members who has done this long enough to spot a hinge post problem before it becomes a panel replacement.
Our Gate Installation team does the work in your driveway. We weld on site, so your gate never leaves your property on a flatbed. That matters when you’ve got a 50-year-old wrought iron gate with ground-contact rot at the posts. Swapping the panel without addressing the post means you’ll fix it twice. We start at the hinge post, every time.
Serving Fullerton means knowing the city’s inland heat and Santa Ana wind patterns. Those are not abstract weather reports to us. They’re the reason your slide gate track heaves and your operator board cooks in August. We plan for both. Every job carries our 90-Day Done Right Promise in writing. One call brings us back, no runaround.
Our Gate Installation Services in Fullerton
We install and service driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates across every Fullerton neighborhood. Here’s how the four most common ones play out locally.
Driveway Gate Installation in Fullerton
A new automated driveway gate in Fullerton typically runs $2,800 to $6,500 installed, depending on width, operator, and whether we’re dealing with a flat central Fullerton lot or a sloped Sunny Hills apron. On the flat 92833 and 92834 tracts, we can usually mount a standard FAAC or BFT operator without much fuss. On the hills, we pier the track into compacted ground or anchor stainless steel so the Santa Ana season doesn’t rack your pinion out of alignment in year one.
Pedestrian Gate Installation
Pedestrian gates in Fullerton are often paired with an existing driveway gate or built into a side-yard run. For ranch homes off Malvern Avenue or Bastanchury Road, we match the ironwork profile of the original gate so it doesn’t look like an afterthought. You’re looking at $700 to $2,200 for most single pedestrian gate installs in Fullerton, more if we’re pouring a new post footing or welding a custom match panel.
Sliding Gate Installation
Sliding gates are a mainstay in Fullerton, especially on the wider driveways in the 92835 hills and the rural-edged lots toward the eastern city line. A single slide gate install typically runs $2,400 to $5,800. The Sunny Hills slope is the variable. A flat-grade slide is straightforward. A sloped apron with any heave means we’re anchoring a stainless steel track and re-leveling the run before the operator ever gets mounted. Skip that step and the gate binds mid-travel within two seasons.
Swing Gate Installation
Swing gates dominate the older Fullerton ranch neighborhoods. Double swing gates across a standard 16-foot driveway usually run $2,000 to $5,400. Single swing gates are less. The older the home, the more likely the hinge post is the failure point, not the panel. We weld reinforcement plates and replace pivot hardware where the original has worn oval. In Fullerton’s Santa Ana wind corridor, undersized hinges just warp faster. We size them for that.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fullerton
We are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Fullerton customers, we stock common Linear and Viking parts locally so we are not waiting on a distributor in Anaheim while your gate sits open. We also run FAAC operators on many Sunny Hills installs because they hold up better to repeat high-heat cycles inland. BFT works well for the older ranch gates that don’t need a heavy draw. We’ll recommend what fits your setup, not whatever is on the truck.
Common Gate Installation Problems We See in Fullerton Homes
- Heaving slide-gate tracks on Sunny Hills aprons. Sloped concrete shifts, the rack and pinion binds, and the safety photocells trip repeatedly. We anchor stainless steel track and re-level the run so the gate doesn’t fight its own foundation.
- Santa Ana wind damage on wide swing gates. Wind gusts funnel through inland Fullerton corridors and warp gate frames at the hinge post. That sag correction failure is what jams operators and burns out motors. We rebuild the hinge post and reinforce the frame so the operator isn’t doing the gate’s job.
- Decades-old wrought iron fatigue on ranch homes. Original 1950s and 1960s driveway gates in the 92832 and 92833 ZIPs show ground-contact corrosion at the post base and worn pivot hardware. Panels look fine when closed, but the post is failing. We fix the post first.
- Solar operator failures on rural Fullerton acreage. Inland summer heat cuts charging capacity hard. Consecutive hot days leave loop detectors and keypad entry dead. We size panels and battery banks for the real heat load Fullerton gets, not the coastal number a catalog assumes.
Pricing for Gate Installation in Fullerton, CA
Here’s what you can expect in Fullerton right now. A single swing gate starts around $1,400 and runs to $3,000 with automation. A double swing gate runs $2,000 to $5,400. A sliding gate on flat terrain is $2,400 to $4,200, but a Sunny Hills slope with heaving track may push that to $5,800 with stainless anchoring. Pedestrian gates land between $700 and $2,200. Custom welded gates and automated double gates on graded lots top out around $9,000 for larger spans.
You get a written quote before we start. The price we quote is the price you pay, full stop. Estimates are free. When you call (877) 610-2993, we’ll confirm what’s included, give you the number, and put it in writing before scheduling.
We Also Serve Cities Near Fullerton
If you’re just over the city line, we run crews to Anaheim, La Habra, Placentia, and La Habra Heights regularly. Same local pricing, same written quote, same 90-Day Done Right Promise. Call (877) 610-2993 and let us know where you are.
Serving Fullerton, CA - Our Local Coverage Area
We’re based in the Fullerton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Fullerton
The concrete apron under your track expands and shifts in the inland heat, which throws the rack and pinion out of alignment and breaks the photocell beam. We fix it by anchoring a stainless steel track and re-leveling the run, then recalibrating the travel limits to match the slope. Call (877) 610-2993 for a free estimate.
Yes. We install solar-powered operators on double swing gates throughout Fullerton’s rural edges, and we size the panel and battery bank for the inland heat load the city actually gets. That means your keypad and loop detector keep working after consecutive hot days. Call (877) 610-2993 and we’ll tell you the cost for your specific gate.
Most of the sagging wrought iron gates we see in Fullerton’s 1950s and 1960s ranch neighborhoods don’t need replacing. The hinge post is usually the failure point, and we repair the post, replace the pivot hardware, and reinforce the frame on site. A repair is almost always cheaper than a new gate. Call (877) 610-2993 and we’ll tell you straight which one you actually need.
We level the hinge posts and use adjustable hinge blocks or offset post extensions so both leaves hang square even when the grade doesn’t cooperate. On Fullerton’s sloped Sunny Hills lots, the low leaf is usually a post issue, not a panel issue. Call (877) 610-2993 and we’ll take a look.
Only if it’s undersized. We spec wider hinge posts and reinforced frame rails for gates in Fullerton’s wind corridors, which keeps them from warping or slamming during Santa Ana gusts. A correctly built gate won’t fight the wind. Call (877) 610-2993 and we’ll price it right for your location.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fullerton since 2001.