Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fremont
Gate installation in Fremont typically runs between $1,800 and $7,500 depending on material, automation, and whether your property sits in an HOA zone with architectural review requirements. Most standard single swing gate installs we complete in Fremont’s central tract-home neighborhoods run $1,800 to $3,400, while automated double driveway gates with operators and safety edges land in the $4,500 to $7,500 range. If your gate is failing or you’re planning a new one, call us at (877) 610-2993 and Hal will give you a straight answer on what it takes.
We’re not a franchise operation. Gatewood Fence & Gate has been owner-operated since 2001, and Hal Gatewood’s name is on the shop and every invoice. We work all over Fremont, from the marsh-side streets of Ardenwood to the hillside HOA communities of Mission San Jose, and we know what each side of town throws at a gate.
Why Gatewood Fence & Gate Is Fremont’s Preferred Gate Installation Company
Fremont stretches from the tidal flats near the bay up into the hills, and that geography creates two very different gate failure profiles. On the west side, in 94555 and the western edge of 94536, salt air off the South Bay eats through uncoated steel hardware faster than anywhere else in the East Bay interior. On the east side, in 94539 and parts of Warm Springs, HOA architectural committees dictate gate height, finish, style, and even the operator brand you can install. A crew that only knows one half of Fremont will misquote the other half.
We’ve been working both halves of this city for years. Hal lives here and his shop is down the road, not in another county. When you call (877) 610-2993, a live person answers. You’ll get a price that’s quoted and agreed before any work starts, and a 90-Day Done Right Promise in writing on every installation. If it’s not done right, one call brings Hal back.
Our Gate Installation Services in Fremont
We install the full range of residential gates across Fremont, from a simple side-yard pedestrian gate to a fully automated double driveway entrance. Here’s how we approach each one in this city.
Driveway Gate Installation
A new driveway gate in Fremont has to work with the lot shape, the grade, and the rules. In the 1960s and 70s ranch tracts of central Fremont, most driveways are flat and wide, which favors a standard swing gate. But we also see a lot of sliding gate demand where driveways slope or where a swing arc would block the sidewalk. We measure on site, build or order to your opening, and set posts with footings sized for the gate weight plus the operator torque it’ll carry for years.
Pedestrian Gate Installation
Side-yard and walkway gates don’t get the attention a driveway gate gets, until one sags into the latch post and won’t close. The older Fremont homes in 94536 and 94538 often still have original ornamental wrought-iron pedestrian gates whose post footings were poured shallow. We reset the posts and hang the gate so it swings true. Jobs like this usually run $800 to $1,800 in Fremont depending on the ironwork condition.
Sliding Gate Installation
Sliding gates are common all over Fremont, especially in the newer Warm Springs developments where driveways often angle up or the setback from the street is tight. A sliding gate doesn’t sweep into the sidewalk or the street, which keeps it clear with city right-of-way rules. We install rollers, track, end stops, and if you want it automated, a motor matched to the gate’s rolling weight. A typical motorized sliding gate install in Fremont runs $3,800 to $6,800.
Swing Gate Installation
For a double swing gate, the hinge posts matter more than the gate itself. A gate sags in the hinge post, not in the middle. In Fremont’s older tracts we regularly dig up posts that were set in a bag of concrete and gravel back in the 70s, and they fail the day you bolt on a modern operator. We reset post footings to match the new gate and the automation, so you’re not fixing the same problem twice. Swing gate installs in Fremont run $2,400 to $6,000 for singles, $4,500 to $7,500 for doubles with operators.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fremont
We’re certified to service and install Viking, Ghost Controls, and DoorKing operators, among others. We keep common repair parts and safety accessories stocked locally, so a Fremont job doesn’t stall waiting on a ground shipment from somewhere else. If your HOA or management company has a preferred brand, we’ll quote it straight and install it to the manufacturer’s spec.
Common Gate Installation Problems We See in Fremont Homes
- HOA approval lag in Mission San Jose (94539). A gate style or finish that hasn’t been cleared by the architectural committee will get flagged, and the homeowner eats the rework. We quote the approval wait into the schedule so you don’t miss a compliance deadline.
- Salt-air corrosion on the bay side (94555 and western 94536). Fremont’s prevailing southwest winds carry marine air and salt particulate straight off the bay, eating uncoated steel hinges, bolts, and post sleeves faster than inland East Bay cities. Aluminum or powder-coated steel is the right call out there.
- Undersized post footings in older tract homes. The original ornamental gates in Fremont’s 1960s and 70s tracts were built light, with shallow footings. A modern operator’s torque eventually twists the post or cracks the collar, and the gate starts sagging on one side.
- Shared HOA entry systems falling out of sync. In Ardenwood and Warm Springs we see multi-home gate systems where the master keypad or callbox works but one resident’s remote won’t trigger. That’s usually a receiver or wiring issue at the operator, not the remote itself.
Pricing for Gate Installation in Fremont, CA
For a ballpark, in Fremont a basic single swing gate installed without automation runs $1,800 to $3,400. Add a motor, safety edges, and a keypad, and you’re at $3,200 to $5,800. A double driveway gate with automation typically lands $4,500 to $7,500. Sliding gates run higher because of the track and roller hardware, usually $3,800 to $6,800 motorized. HOA-required finishes or custom ironwork will push the top of those ranges.
What you’ll never get from us is a phone price that inflates at your door. The quote Hal gives you is the price you pay. We put the 90-Day Done Right Promise in writing, and we offer a free second opinion on any written estimate you’ve already got. Call (877) 610-2993 and we’ll come measure for free.
We Also Serve Cities Near Fremont
We regularly take gate installation jobs in Newark, Union City, Hayward, and Fairview. If you’re a few miles outside Fremont, the same crew and the same upfront pricing apply. Our Gate Installation page covers the full service range in the Bay Area, and Gate Installation in Fremont is where we break down the neighborhoods, HOAs, and corrosion zones specific to this city.
Serving Fremont, CA - Our Local Coverage Area
We’re based in the Fremont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Fremont
Yes, in nearly every Mission San Jose neighborhood you’ll need architectural committee approval before changing a gate style, finish, height, or adding an automated operator. The committees in 94539 review gate applications on a set schedule, usually monthly or quarterly, and some require a specific paint color or metal finish. We coordinate with the management company, submit the specs they need, and schedule installation after the approval comes back so you don’t risk a fine or a redo. Call (877) 610-2993 for a free measure and we’ll walk you through the approval process.
Aluminum and powder-coated steel hold up best near the bay side of Fremont. The marine air and salt particulate off the San Francisco Bay will rust uncoated iron hardware, seized hinges, and corroded post anchor bolts within a few years in Ardenwood and western 94536. We recommend aluminum frames with stainless hardware for new installs out there, or a high-quality powder coat on steel. If you’re repairing an existing steel gate, we’d add a proper prep and coating on the damaged sections so you’re not back in the same spot in two years.
Yes, adding a keypad to an existing gate operator is straightforward and usually doesn’t require a full operator replacement. We install wired and wireless keypads from Viking, Ghost Controls, and DoorKing that integrate with most operators already in use at Ardenwood HOA communities. The one thing to check is that your operator has an available accessory input, and we can verify that on site before you buy anything. Call (877) 610-2993 and we’ll check your existing setup.
Most double gate sag on one side is a hinge post problem, not a gate problem. In Fremont’s older tracts we routinely find the original post was set in a shallow footing that has cracked or shifted, letting the gate drop and bind on the latch side. If the gate panel itself is straight and the welds are intact, we can reset the post, rehang the gate, and align both leaves for a fraction of a new install. We’ll tell you honestly if the gate itself is compromised. A post reset in Fremont typically runs $600 to $1,400 depending on footing condition.
For most Warm Springs homes, a standard gate operator install runs 1 to 2 days from measure to finished job, assuming the existing gate and posts are sound and no HOA approval is required. Warm Springs communities in 94539 often have newer gates built for automation, which speeds the job. Where we have to reset a post or coordinate HOA approval first, the timeline stretches to fit the committee’s schedule. We’ll give you a written timeline with the quote. Call (877) 610-2993 for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fremont and the surrounding Bay Area since 2001.