Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fort Lupton
A new driveway gate in Fort Lupton typically runs $2,800 to $9,500 installed, depending on the span, the operator, and whether we’re setting posts in town soil or out on Weld County clay. Most residential jobs take one to two days once materials arrive. If your existing gate is sagging, binding, or the post has heaved out of plumb, call (877) 610-2993 and we’ll tell you honestly whether it’s a repair or a replacement. Our Gate Installation crew knows the difference between a gate that needs new hinges and one that needs new footings.
Fort Lupton sits on flat, open ground where the wind never really stops. That changes how a gate should be built. A lightweight ornamental panel that works fine in a sheltered subdivision will twist and bind out here. We’ve been setting posts below frost depth and sizing operators for wide, heavy panels since 2001, long enough to know what the wind does to a gate that was under-built. The name is on the shop, and the shop is down the road, that’s the oldest accountability there is.
Why Gatewood Fence & Gate Is Fort Lupton’s Preferred Gate Installation Company
Hal Gatewood has been building and fixing gates since 2001. That’s 29 years in fences and gates, still owner-operated, still answering the phone with a live person. You won’t get a voicemail when you call at 6 a.m. because a well pad gate won’t close. You’ll get a person, sometimes Hal himself.
Fort Lupton customers deal with a specific set of gate problems that suburban companies don’t see often: livestock-rated pipe gates, security barriers at oil and gas access points, and solar operators on remote acreage with no power at the road. We do Gate Parts & Welding in Fort Lupton on site, so the gate stays in your driveway instead of being hauled to some shop across the county. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back, no runaround. And our pricing is quoted before any work starts, agreed to in writing, and never changes at the door.
We’re locally owned and the address is published, the license number is on the invoice. You can drive to the shop and look Hal in the eye if you want. That’s not a slogan, it’s how we’ve worked for over two decades.
Our Gate Installation Services in Fort Lupton
Driveway Gate Installation
Most Fort Lupton driveway gates are either 10-foot or 12-foot single panels on residential lots, or much wider double panels on acreage. We size the operator to the panel weight and the wind load, not to the cheapest motor on the shelf. On a long rural driveway off Weld County Road 29, a solar operator with a battery that can hold through a week of short winter days is often the right call. In town, where power is at the house, a hardwired LiftMaster or Viking operator is simpler and cheaper over time. A typical driveway gate in Fort Lupton runs $3,200 to $7,800.
Internal link test: Gate Installation in Fort Lupton covers the full range of what we do here.
Pedestrian Gate Installation
A walk gate next to a big driveway gate keeps people off the driveway panel and extends the life of the operator. We match the pedestrian gate to the driveway gate so the whole entrance looks like it was built at once, not bolted on later. Priced around $900 to $2,400 installed, depending on the material and whether it needs a magnetic lock or keypad for coded entry.
Sliding Gate Installation
On Fort Lupton properties where the driveway slopes up from the road, or where snow piles make a swing gate impractical, a sliding gate is the better answer. Sliding panels need a level track, a solid concrete or steel post at the receiving end, and an operator rated for the panel weight. We install cantilever slide gates for ranch entrances and tracked slide gates for commercial and security compounds. Expect $4,500 to $12,000 depending on span and operator. We stock parts for Ghost Controls and DoorKing slide operators locally, so there’s no week-long wait for a bracket.
Swing Gate Installation
Swing gates are the most common style in Fort Lupton, and the most abused by wind. A 16-foot double swing gate acts like a sail in a 50 mph gust, and the hinge post takes every bit of that load. We set 6×6 steel posts in concrete below frost depth, never wood posts in dirt. On welded pipe ranch gates, we weld the hinges to the post and the frame in the driveway, then mount operators from FAAC or BFT. Double swing gates on rural lots around Frederick and Firestone run $4,000 to $10,000 with operators.
Double Gate Installation
Wide entrances on feedlot properties and ranch driveways almost always need double gates rather than one oversized panel. Two 10-foot panels are easier on operators, cheaper on concrete, and less likely to twist in the wind than one 20-foot panel. We build the center stop, set both posts, and sync the operators so the panels close together without slamming. Double gate installations in Fort Lupton start around $5,500 and go up with operator count and panel weight.
Security Gate Installation
This is where Fort Lupton is different from Brighton or Longmont. Oil and gas operators in Weld County’s DJ Basin need well pad access gates that meet Fort Lupton Gate Access Control standards: locked anti-ram vehicle barriers or coded entry. A residential gate company that’s never touched an electrified access panel won’t know what to do with the permit requirements or the hardware. We do. Security gate work for commercial and industrial sites in Fort Lupton typically runs $7,000 to $19,000, quoted per site.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Lupton
We’re certified to work on Viking, Ghost Controls, DoorKing, and Elite gate motors, among others. That matters in Fort Lupton because operators fail at inconvenient moments, and waiting a week for a part from a supplier three states away isn’t an option when a feedlot entrance won’t open or a well pad gate won’t secure. We keep the most common boards, arms, and remotes for these brands in stock and on the truck, so when your Elite opener throws a limit switch fault, we usually fix it that day. Show me the gate closing on its own and I’ll show you where it’s failing, usually the operator, sometimes the hinge post, occasionally both.
Common Gate Installation Problems We See in Fort Lupton Homes
- Posts heave out of plumb every spring. Freeze-thaw cycles are more pronounced here without the urban heat island buffer you’d find in Denver. A post set at 18 inches will move, a post set at 42 inches won’t. When the gate starts dragging on the ground in March, the post moved, not the panel.
- Unbraced steel tube gates twist under sustained wind. The flat terrain around Fort Lupton funnels Front Range gusts that routinely exceed 50 mph. A gate frame without diagonal bracing or a mid-rail will twist and throw the latch out of alignment within a couple of seasons.
- Solar openers lose capacity in winter. Short daylight hours on an east-facing solar panel with no tree cover means the battery runs low in December and January. The gate works fine in July and is dead when the temperature drops. We size solar panels and battery banks for the worst month, not the best one.
- Irrigation overspray rusts hinges and latch hardware early. Decades of pivot and ditch irrigation on farm properties throws water onto the gate hardware if the gate sits near the field edge. We see hinge pins rusted solid and latch rods seized on gates that are structurally fine. Stainless hardware and sealed bearings make a real difference here.
Pricing for Gate Installation in Fort Lupton, CO
Honest numbers, because you shouldn’t have to call three companies to figure out what a gate costs here. A standard 12-foot residential driveway gate in Fort Lupton runs $2,800 to $4,600 without an operator, $4,200 to $7,800 with one. A double swing gate on rural acreage runs $5,500 to $11,000 depending on span, panel weight, and operator count. A sliding security gate for a commercial or industrial compound starts at $7,000 and runs up from there. Pedestrian gates sit between $900 and $2,400.
Your price is quoted and agreed before any work starts. That’s not a sales line, it’s how we’ve always done it. Call (877) 610-2993 for a free estimate. We’ll come out, measure the opening, check the soil and the power situation, and give you a written number. No trip charge inside the county. Seniors and veterans save 10% permanently. A free second opinion on any written estimate is also available, if you’ve already got a number from someone else and want it checked.
We Also Serve Cities Near Fort Lupton
Beyond Fort Lupton itself, our gate installation crews work regularly in Frederick, Firestone, Brighton, and Lochbuie. Same team, same pricing, same 90-Day Done Right Promise. Whether the property is a 1950s ranch house in town or a 40-acre parcel off Weld County Road 31, we measure, quote, build, and stand behind it.
Serving Fort Lupton, CO - Our Local Coverage Area
We’re based in the Fort Lupton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Fort Lupton
Yes. Most oil and gas operators in Weld County require well pad access gates to meet operator security standards: locked anti-ram vehicle barriers or coded entry. That means a commercial-grade slide or swing operator paired with a keypad or card reader, often with a battery backup so the gate stays functional during outages. We’ve done these installs and know the hardware. Call (877) 610-2993 and describe the site, and we’ll tell you what’s actually required versus what’s nice to have. Estimates are free.
We set gate post footings 42 inches deep minimum in Weld County, and 48 inches for heavy double gates or sliding panels. Local frost depth is right around 36 inches, but the open terrain and lack of an urban heat island means the ground freezes harder and heaves more than it does closer to Denver. Shallow footings are the number one reason gates start dragging in the spring. That’s a fixable problem, but the fix means digging the post out and doing it right. If a gate post has heaved, call us, we’ll reset it and you won’t call about it again.
A double swing gate with two 10-foot welded pipe panels, 6×6 steel posts set below frost depth, an FAAC or BFT swing operator on each panel, and a solar power system with a battery bank sized for winter. The double panel design reduces the wind load on each hinge post, which matters more on Weld County Road 29 and the open roads around it than it does anywhere in town. And if the property has livestock, add a cattle guard or a pedestrian gate to keep animals from testing the main panel. That setup runs roughly $6,000 to $11,000 installed. Call (877) 610-2993 with the approximate driveway width and we’ll price it in a day.
Yes, and on most rural parcels it’s the most practical option since running line power a quarter mile from the house is expensive. But solar openers need to be sized for the worst month, not an average day. In Fort Lupton, December and January bring short days and long nights, and the wind drives the cold into the battery compartment. We use solar panels rated well above the operator’s draw and battery banks with enough reserve to run the gate through a cloudy week. A properly sized solar setup will cost a few hundred more up front and save you a dead gate every winter.
A gate sags in the hinge post, not in the middle, and that’s where we start. A 20-foot livestock gate needs diagonal bracing inside the frame, a wheel on the latch end, and hinge posts that were set deep and braced. If the post has already moved, adding a gate wheel will stop the drag for a while but won’t fix the post. The real fix is resetting the post below frost depth, squaring the panels, and welding in the bracing. We do that in your driveway or at the ranch entrance. Call (877) 610-2993 for a quote, free estimates, no trip charge inside the county, and the 90-Day Done Right Promise on every job.
Contact Gatewood Fence & Gate for Gate Installation in Fort Lupton, CO
Need a gate built, replaced, or straightened out in Fort Lupton? Call (877) 610-2993 and a live person answers, 24/7. No voicemail, no call center. Hal Gatewood has been doing this since 2001, the address is published, and the name is on every invoice. We quoted and agreed on the price before any work starts, and the 90-Day Done Right Promise is written on the job, not buried in fine print. If you’re not sure whether you need Gate Repair - Fort Lupton or a full installation, we’ll tell you honestly, and if it’s a repair, we’ll fix the gate in your driveway instead of selling you a new one. Free estimates, $40 off any repair over $200, and a standing 10% discount for seniors and veterans.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Lupton since 2001.