Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Fort Lupton
Gate access control in Fort Lupton means keypads, card readers, phone entry, and video intercoms that actually hold up to Weld County wind and working ranch traffic. We service the full mix here: residential keypads on shared driveways off County Road 23, coded entry on oil and gas well pads along County Road 8, and phone entry systems for industrial compounds that need a log of who came and went. Hal Gatewood has been fixing gates since 2001, and the person who answers when you call (877) 610-2993 is a live human, night or day.
Why Gatewood Fence & Gate Is Fort Lupton’s Preferred Gate Access Control Company
We are not a call center routing a subcontractor from three counties away. Hal Gatewood’s name is on the shop, the address is published, and his crews are background-checked and uniformed. When a keypad fails on a shared driveway gate off County Road 18, we show up with the reader, the wire, the connectors, and the crimper, and we fix it on site. That matters in Fort Lupton, where the job is often not a tidy residential courtyard gate but a 24-foot pipe slider with a Viking operator and a photocell fighting 50 mph gusts.
Our 90-Day Done Right Promise is in writing on every job. If the gate binds, the keypad drops its programming, or the loop detector misses a pickup truck, one call brings us back. No runaround, no fresh invoice. That is the kind of accountability people in small towns actually check on before they hire.
We answer the phone 24 hours a day, 7 days a week. A dead access system on a gate is not a convenience problem; it means a driveway you cannot get into or a well pad that is not secure. We treat it accordingly.
Scheduling works through our Denver office; the crews run local to Fort Lupton. You are not paying big-city dispatch theater. You are paying a crew that knows Weld County roads and shows up when they said they would.
Our Gate Access Control Services in Fort Lupton
Keypad Entry
A keypad on a Fort Lupton gate has to survive freeze-thaw winters, blowing dust, and direct sun on an exposed post off Highway 52. We install and service hardwired and wireless keypads, program multiple user codes for shared driveways and farm entrances, and replace sun-baked keypads that still click but do not send the signal. If you have a property where two families or a tenant and a landlord both need access, we build out code schedules so you can see who opened the gate and when.
Remote Control
Remotes fail quietly. The range shortens, the button starts needing a second press, and then one day nothing. We program and supply remotes for Linear, DoorKing, Viking, and Ghost Controls operators, and we can clone most existing systems on site. On open Fort Lupton acreage, we often see only one remote working while the family fights over it. We fix that by adding fresh remotes and matching the frequency on the receiver, so the gate actually opens when you are still 40 feet from the cattle guard.
Phone Entry
Phone entry systems let a driver call the gate from the county road, and it rings through to whoever is on the approved list. That is common on Fort Lupton industrial compounds and leased farm entries where a delivery truck or a vac truck needs one-time access. We install and service cellular and landline-based phone entry, and we program it so the system logs the call and the open event. Operators along the DJ Basin like the audit trail. So do homeowners who want to know exactly which service truck came through and when.
Card Reader
Card access is the quiet workhorse of Fort Lupton commercial gates. A tag or fob on the reader, a relay closes, the gate opens. We install proximity readers, wire them into existing operators, and replace worn readers on gates that have been in service since before smart access was a phrase. On oil and gas sites, card readers often pair with anti-ram barriers. You need a reader that reads reliably in dust and cold. We carry and service commercial grade units, not the plastic consumer readers that die after one hard winter.
Video Intercom
A video intercom at the gate means you see who is standing there before you open. On rural Fort Lupton parcels with long drives, that matters when a stranger in an unmarked truck pulls up. We install IP video intercoms, wire them to an inside monitor or a phone app, and integrate them with your existing keypad or card reader. If the gate is 600 feet from the house, we run the data path that actually keeps the signal alive, not the undersized cable a big-box kit ships with.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Lupton
We service and carry parts for Linear, Viking, Ghost Controls, and DoorKing, among other lines we see on Fort Lupton gates. That is the short list that actually shows up on Weld County properties: Viking on the heavy industrial sliders, Linear and Ghost Controls on residential and agricultural swing gates, DoorKing on commercial phone entry and card systems. Because we are certified on these systems, we can usually bring the right board, receiver, or keypad on the first truck roll instead of making you wait on a backorder. Parts for the common failures sit in our service van, not in a warehouse across the state.
Common Gate Access Control Problems We See in Fort Lupton Homes
- Frost heave knocking posts out of plumb. Exposed acreage without the Denver urban heat buffer freezes hard. The post shifts, the gate panel binds against the rack and pinion, and the operator trips its safety photocell. You fix the gate by fixing the post first, then the electronics.
- Wind gusts over 50 mph flexing wide slide gates. Fort Lupton sits flat and open. A 20-foot or 24-foot panel catches that wind like a sail, drifts off the limit switches, and the gate reverses or refuses to close. We reset and brace, and we program the limits so the operator does not fight every gust.
- Irrigation overspray corroding hinge welds and latch hardware. Decades of pivot irrigation mist on farm properties rusts the hinge posts, the latch, and the operator mount. We weld new hinge barrels on site, replace the rotted hardware, and coat the repair so it survives the next season of overspray.
- Shared driveway gates with mixed truck and car traffic. The loop detector that sees a sedan misses the pickup or the stock trailer, so the gate closes on a vehicle or fails to open at all. We recalibrate loop sensitivity for the actual vehicles that use the drive, not the default setting from the factory.
Pricing for Gate Access Control in Fort Lupton, CO
Here are straight numbers for Fort Lupton. A keypad entry install on an existing gate runs roughly $450 to $900, depending on whether we are pulling new wire from the house or tapping an existing operator loop. Remote control programming is typically $75 to $180 per remote, with clone service often on the lower end. A phone entry system install runs $1,200 to $2,400, including the controller and the first year of cellular service where the site needs it. A card reader retrofit starts around $850 and climbs with the number of tags and readers. Video intercoms start around $1,600 for a single gate with app access. Every quote is in writing before work starts, agreed to in advance, and that is the number on the invoice. Call (877) 610-2993 for a free exact estimate. No trip charge inside the county, and $40 off any repair over $200.
We Also Serve Cities Near Fort Lupton
Most of our Fort Lupton work takes us out along County Roads 8, 18, and 23, but we run the same trucks and the same 90-Day Done Right Promise into Frederick, Firestone, Brighton, and Lochbuie. If your property sits on the line between any of those, you are still in our county and still get the no-trip-charge service. Whether you found this page looking for Gate Access Control or you are just opening a gate that will not stay closed in Fort Lupton, the call goes to a live person who can talk through what you are seeing.
Serving Fort Lupton, CO - Our Local Coverage Area
We’re based in the Fort Lupton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Fort Lupton
We start with the barrier itself, because the access control on a well pad is only as good as the gate it is wired to. We service the operator, the coded entry keypad or card reader, and the anti-ram vehicle barrier as one system. On active Weld County sites off County Road 8, operators typically need their entrance log, a code for each authorized driver, and a barrier that locks down against intrusion. We can weld the heavy pipe gate, mount the barrier, wire the reader, and program the codes on the same call. We also service the safety loops so the barrier does not drop on a legitimate truck. If you run a pad that a purely residential gate company has already touched, call (877) 610-2993 and we will come look at what is actually there.
The sag is in the hinge post, not the hinges. On Fort Lupton agricultural parcels, decades of pivot irrigation overspray rots the base of the post, and frost heave leans it out of plumb. Tightening hinge bolts does nothing because the post itself is moving. We cut out the corroded section, weld in a fresh steel post or a reinforced sleeve, reset the footing, and then re-hang the gate so it swings true. The operator stops fighting the gate and the keypad and remote stop working overtime. If the gate has been welded once already and is drifting again, the fix is usually a deeper footing below the frost line and a brace at the hinge post top.
Yes, in nearly every case. We recently serviced a slide gate operator on a shared driveway off County Road 23 where a swing gate would have blocked the narrow right-of-way as it swung. The 24-foot steel tube gate had a Viking G-5 operator that kept tripping the safety photocell due to wind gusts over 50 mph flexing the panel. We reset the rack and pinion alignment, recalibrated the loop detector for the mixed truck and car traffic, and added a keypad entry so both property owners could come and go without a remote. If you share a drive or a farm lane, we can program separate codes for each household, plus a temporary code for a delivery or a hired hand, and you can delete any code by phone.
We do. Fort Lupton compounds, feedlots, and shop yards often need a phone entry box at the gate so a trucker can call the office, plus card readers for the regular workforce. We wire the phone entry into the operator, program the call routing so it rings a real desk phone or a cell, and add video if the site needs to see who is at the gate before opening. We also maintain systems that have been in place since before cellular was an option, and we can upgrade the communication path without replacing the gate or the operator. Call (877) 610-2993 and describe your gate; we will tell you straight what it needs.
Your loop detector is seeing the truck through the fence line, or the detector is adjusted too wide and is reading the county road as part of your driveway. On Fort Lupton properties where the drive entrance sits near the road edge, the magnetic field from the loop spills past the gate and triggers on passing traffic. We tune the loop sensitivity and often add a delay or reposition the loop so it only reacts to a vehicle actually standing on your concrete approach. In the meantime, kill the automatic open if the gate is opening for traffic that has no business entering, and give us a call at (877) 610-2993. We will get it sensing only what it should.
If your gate access control has quit, is opening for strangers, or needs keypad, phone entry, or card reader work in Fort Lupton, call (877) 610-2993. You will reach a live person, get a free estimate in writing, and the price we quote is the price you pay. Hal Gatewood has been doing this since 2001, and the name is on every invoice.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Lupton and Weld County since 2001.