Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across Duquesne
Gate installation in Duquesne, PA typically runs $1,400 to $6,200 for a standard driveway gate with operator, and most jobs are finished in one to two days once materials arrive. That’s the spread for what we actually see here: a single swing gate on a masonry post starts around $1,400, while a full sliding driveway gate with a new operator, safety edges, and post resets lands closer to $6,000 on the steeper lots. We answer the phone around the clock at (877) 610-2993, and someone who knows gates picks up every time.
We’ve been working Duquesne’s hillside streets long enough to know that the real work is rarely the gate itself. It’s the post leaning 4 degrees off plumb, the footing that was poured shallow in the 1960s, the operator board that predates current safety codes. That’s where a Gate Installation crew earns its keep, and it’s the difference between a gate that works for five years and one that works for twenty.
Why Gatewood Fence & Gate Is Duquesne’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and his name is still on the invoice. That matters in a mill town like Duquesne, where property lines are close, promises matter, and a handshake still means something on Kennedy Avenue. When we say we’ll show up Thursday, the person who shows up works for Hal directly, not a subcontractor three counties over.
We carry parts for Duquesne’s older gates locally through our Gate Parts & Welding in Duquesne service, which means we’re not waiting on a warehouse to ship a hinge plate from Ohio while your driveway sits open. On-site welding is standard for us. If a wrought-iron gate from the 1930s has a cracked hinge weld, we fix it right there in the driveway. We don’t load it onto a truck and haul it to a shop. The gate stays where it belongs, and you can watch the repair happen from your porch.
Every job carries our 90-Day Done Right Promise in writing. If something isn’t right, Hal comes back and makes it right. No runaround, no fine print, no arguing over who did what. That’s been the rule since 2001, and it hasn’t changed.
Our Gate Installation Services in Duquesne
Driveway Gate Installation
Driveway gates in Duquesne run into one recurring problem: the hill. Streets climb sharply from the Mon riverfront, and the original posts on many lots were set in shallow concrete footings that freeze-thaw cycles have heaved and tilted for decades. We reset posts before we hang anything on them, and we pour deeper footings with gravel drainage so the next Duquesne winter doesn’t undo the work. Expect a new single driveway gate with a Linear or DoorKing operator to run $1,800 to $4,700 depending on width, material, and whether the posts need resetting.

Pedestrian Gate Installation
Most Duquesne pedestrian gates sit between narrow brick homes on dense lots, often swinging off a masonry column or a shared fence line. The common failure we see is a post that’s shifted and a gate that now drags across the walk. We install new pedestrian gates with proper post work included, not just a hinge swap. A basic steel pedestrian gate with hardware runs $450 to $1,200 in Duquesne, and that includes getting the post plumb first.

Sliding Gate Installation
Sliding gates make sense on Duquesne’s steeper driveways where a swing gate would fight the grade every time it opens. But a sliding gate is only as good as the track and the cantilever footing underneath it. On cross-slope lots, we set the track on a properly drained pad and level against the hillside, not just the driveway surface. Sliding gate installs in Duquesne typically run $2,800 to $6,200 with an operator and safety photocells.

Swing Gate Installation
Duquesne’s original homes came with swing gates, and a lot of them are still hanging. Or partially hanging. Installing a new swing gate on old masonry posts means first checking whether the posts are worth saving. If they’re set in crumbling footings, they’re not. We reset or replace posts, then hang the gate and tune the hinges so it swings with one hand. Single-swing gate installations run $1,400 to $3,800 in Duquesne depending on post condition and operator needs.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Duquesne
We install and service operators from Linear, DoorKing, and Viking, among others. These are the boards and motors we keep in stock for Duquesne jobs because they hold up to the Mon Valley’s humidity and they’re straightforward to maintain. If your existing operator is one of these brands and the gate itself is still sound, we’ll often reuse the motor and upgrade the safety components rather than sell you a whole new system you don’t need. That’s just how we work.
Common Gate Installation Problems We See in Duquesne Homes
- Leaning posts from hillside soil creep: On Duquesne’s cross-slope lots, decades of slow soil movement have pushed posts several degrees off plumb. You can’t hang a new gate on a tilted post and expect it to close right. The post gets reset into a deeper, drained footing first.
- Corrosion from river fog and humidity: The Monongahela River valley traps moisture around Duquesne, and ferrous gate hardware rusts faster than it does in drier parts of Allegheny County. Original ornamental iron gates from the 1920s through 1940s are often rusted through at the hinge welds and latch points.
- Obsolete operators without modern safety systems: Many legacy gate openers in Duquesne predate UL 325 entrapment protection requirements. They reverse at full force or don’t reverse at all. We won’t install a new gate on an operator that can’t meet current safety standards. The old board gets replaced or the whole operator gets upgraded.
- Cramped side yards and tight clearances: Duquesne’s narrow lots mean gates often swing across a public walk or into a neighbor’s setback. We check swing clearances and grade before we install, and sliding or dual-swing layouts get recommended when a single swing simply won’t fit.
Pricing for Gate Installation in Duquesne, PA
Here’s the honest math for Duquesne’s market. A basic pedestrian gate with new hardware runs $450 to $1,200. A single driveway swing gate with post reset starts around $1,400 and tops out near $3,800. Sliding driveway gates run $2,800 to $6,200 depending on track length, operator choice, and whether we’re rebuilding the footing pad. Security gate builds with heavier-gauge steel and our Gate Access Control in Duquesne options like card readers and intercom add $800 to $2,500 on top of the base gate cost.
What changes the number is usually the post work, not the gate. On Duquesne’s hillsides, expect post excavation and new footings on roughly six out of ten jobs. We quote that work upfront. The price we give you before we start is the price on the invoice. Every estimate is free, and there’s no trip charge inside the county. Call (877) 610-2993 and we’ll walk the site, measure, and give you a written number.
We Also Serve Cities Near Duquesne
We work throughout the Mon Valley and the eastern boroughs. If you’re in McKeesport, North Versailles, Forest Hills, or Munhall, the same Gate Installation crew that handles Duquesne jobs can get to you, usually the same week. We’re local to this part of Allegheny County, not driving in from across the state.
Serving Duquesne, PA - Our Local Coverage Area
We’re based in the Duquesne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Duquesne
Usually yes, but the post gets reset before anything gets hung on it. A leaning masonry post means the footing underneath has failed or the hillside has crept over decades. We excavate around the post, pour a new deeper footing with gravel drainage, and reset it plumb. On some Duquesne lots the original post is too far gone to save, and we’ll pour a new concrete post with a steel core. Either way, your new gate starts on a straight foundation. Call (877) 610-2993 and we’ll look at the post before you buy the gate.
You can usually keep the original gate. Duquesne still has beautiful wrought-iron gates from the 1920s through 1940s, and ripping them out is a shame when the metal is sound. We also provide Gate Repair - Duquesne on-site, so hinge cracks and rusted latch areas get repaired in place. Then we retrofit a modern operator with a current UL 325 compliant control board, safety photocells, and an auto-reverse function. If the gate itself is rusted through in multiple structural points, replacement becomes the cheaper honest answer. We’ll tell you which one applies to your gate and quote both directions.
No, it’s almost never the hinge. When a Duquesne hillside lot shifts, the post moves with the soil. The post is now tilted, and the gate swings open because gravity is pulling it downhill. Adjusting or replacing hinges just delays the problem a season or two. The fix is resetting the post into a deeper, properly drained footing, then re-hanging the gate with hinges sized for the corrected alignment. We see this constantly on streets that climb away from the river. Call (877) 610-2993 for a free post inspection.
You can absolutely run solar on a Duquesne driveway gate, provided the gate location gets at least a few hours of direct sun. The Mon Valley’s foggy mornings cut into solar production, so we size the panel and battery bank for real-world conditions here, not a sunny-weather brochure number. Linear and DoorKing both make solar-ready operators we’ve installed on Duquesne hillside lots where running conduit down a steep yard would cost more than the gate. If your driveway is shaded by the hillside or mature trees, wired power becomes the more reliable option. We’ll run the numbers before you commit.
There’s a fast way to tell. If your operator doesn’t have external photocell sensors across the gate opening and an audible alarm when it runs, it predates current UL 325 entrapment protection standards. Any operator installed before roughly 2008 without a retrofitted photo eye is not compliant. We check the control board date, the edge sensors, and the reverse sensitivity on every Duquesne job before we hang a new gate. If the old operator can’t be brought to standard, we’ll quote a replacement board or a full operator swap. We won’t install a new gate onto an operator that can hurt someone. Call (877) 610-2993 and we’ll test yours.
Hillside Work, Done Right
On a hillside street off Kennedy Avenue, we pulled an original wrought-iron swing gate after the homeowner reported it dragging on the concrete walk. The hinge post, set in a shallow 2-foot footing, had heaved and tilted 4 degrees over the years. Rather than force the gate into plumb, we excavated the post, poured a new 42-inch footing with gravel drainage, reset the post, and installed a new LiftMaster swing gate operator with a safety photocell pair. The gate still opens with fingertip pressure, and the operator no longer faults on the limit switch.
That job wasn’t about the gate. It was about the ground underneath it. Duquesne’s steep lots and river-valley moisture mean post footings fail before gates do. If your gate is dragging, sagging, or refusing to latch, the problem is almost certainly under the post, not in the hinge barrel. That’s where we start every time.
We’re Gatewood Fence & Gate. Hal Gatewood has been doing this since 2001, and he’ll be the one answering the phone when you call. We serve all of Duquesne, from the 15110 ZIP up the hillsides to the river side, and we quote every job before we start. Free estimates, no trip charge inside the county, and a 90-Day Done Right Promise on every installation. Call (877) 610-2993 today and tell us what your gate is doing. Or not doing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Duquesne since 2001.





Before
After
Before
After
Before
After