Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Duquesne
Gate repair in Duquesne, PA typically runs $195-$490 for most hinge, post, and weld work, and a rusted gate on one of these hillside lots almost always needs the post reset, not just a hinge swap. That’s the honest starting point before anybody looks at your gate. If your gate drags on the ground, won’t latch, or has a post leaning toward the sidewalk, call Gatewood Fence & Gate at (877) 610-2993 and Hal or one of his crew will come look at it. A live person answers, day or night, and the estimate is free.
Why Gatewood Fence & Gate Is Duquesne’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001 because he got tired of seeing gates ripped out and replaced when a weld or a post reset would have fixed the thing for another twenty years. That repair-first habit is exactly what Duquesne gates need. Around here, between McCallister Street and the old Duquesne Works site, a lot of the original ornamental iron has been corroding since before the mill closed. Someone who only installs new gates will tell you to replace it. We’ll tell you whether it’s worth saving, and mean it.
We’re not a franchise and we’re not a dispatcher sending a stranger. The name is on the shop, and the shop’s address is published for anyone who wants to drive over and look Hal in the eye. Duquesne customers call the same number you’ll call, and they talk to the same person who shows up. The 90-Day Done Right Promise is written on every job: if it’s not done right, one call brings us back, no runaround.
Our Gate Repair Services in Duquesne
Hinge & Post Repair
Most Duquesne gates fail because the post gave up, not the gate. On the steep cross-slope lots climbing away from the Monongahela, shallow concrete footings heave with the freeze-thaw cycle, and the whole post tips out of plumb. We dig out the old footing, pour a new one keyed into the hillside, and reset the post so the gate actually swings true again. That’s the difference between a fix that lasts and a hinge job you’ll pay for twice.

Gate Realignment
A gate sags in the hinge post, not in the middle, and that’s where we start. On a tight Duquesne lot where the walkway and the gate share a few feet of grade, a gate that drags by an inch becomes a gate that won’t close at all come spring frost. We realign the panel, level the hinges, and check the latch so it catches clean without slamming. If the post moved, we fix that too, not just the symptom.

Electric Gate Repair
Electric and automatic gates in Duquesne deal with two enemies: the river valley’s humidity and a power grid that takes hits during storms off the Mon. When an opener fails, we check the motor, the board, the safety photocell, and the ground the way Hal would want it checked: start with what’s actually broken. We service LiftMaster, Linear, Viking, Ghost Controls, DoorKing, and most other major openers without telling you to replace a board that just needs a clean connection.

Weld & Rust Repair
Original 1920s wrought iron on Duquesne homes has spent eighty years in Mon Valley fog. Bottom rails rust through, hinges crystallize, and a resident forcing a stuck latch snaps the rail entirely. Hal welds on site, in your driveway, so the gate never has to leave your property. We cut out the corroded section, weld in new steel, grind it clean, and coat it so it doesn’t rust through again next winter.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Duquesne
We’re certified to work on nine gate brands, but around Duquesne we see a lot of Linear and Viking openers on the older automatic gates, with DoorKing showing up on some of the commercial and multi-family properties along Duquesne Boulevard. Hal keeps common boards, arms, and photocells in the truck for these brands so we’re not making a second trip to the shop while your gate sits dead. If we need a part we don’t carry, we say so plainly and tell you when it’ll be in hand.
Common Gate Repair Problems We See in Duquesne Homes
- Post heave on cross-slope lots. Streets climb sharply from the river, and gates installed decades ago on hillside lots often have footings that weren’t built for the grade. Soil creep tilts the post a few degrees off plumb, and the gate starts rubbing or swinging on its own.
- Rust-through at the bottom rail. The Mon Valley holds fog and moisture right around Duquesne, and ferrous gate hardware corrodes faster here than up on the flats. Original iron gates snap at the bottom when the rust finally wins.
- Slide gates on narrow shared driveways. Row-home and narrow-lot Duquesne properties often can’t fit a swing gate, so a slide gate is the only workable option. When the rack strips or the loop detector fails, the whole driveway shuts down.
- Random opening and closing on automatic gates. A phantom-opening gate is usually a bad loop detector, a dying photocell, or a board getting confused by moisture. Any automatic gate doing this is a genuine safety risk, especially around kids and pets, and it needs a qualified repair person, not a YouTube fix.
Pricing for Gate Repair in Duquesne, PA
A hinge and latch repair on a standard Duquesne swing gate runs $195-$320. Post resets, which are more common here than anywhere flat, run $280-$490 depending on whether we’re keying a new footing into the hillside. Weld and rust repair on ornamental iron starts around $240 and goes up with how much rail we’re cutting out. Electric opener diagnostics and minor board or photocell work runs $175-$390; a full opener replacement is more, and we quote it in writing before any work starts. Every price is quoted and agreed before we touch your gate, and we don’t show up and ask for more. There’s no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a real number.
We Also Serve Cities Near Duquesne
Our Gate Repair team covers the whole Mon Valley and the eastern suburbs. If you’re in Duquesne, we’re already nearby, and we do the same repair-first work in McKeesport, North Versailles, Forest Hills, and Munhall. Same phone, same crew, same written promise.
Serving Duquesne, PA - Our Local Coverage Area
We’re based in the Duquesne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Duquesne
The cross-slope lots climbing from the Monongahela have shallow concrete post footings that heave during the 50-plus freeze-thaw cycles a typical Pittsburgh-area winter brings, so hinge posts end up several degrees out of plumb and the gate hangs wrong from the root. In flat neighborhoods, a hinge swap often does it; in Duquesne, we’re usually digging out and re-pouring the footing. If your gate drags or swings open on its own, call (877) 610-2993 and we’ll tell you whether it’s a hinge or a post before we touch anything.
Yes. Most of Duquesne’s original housing stock sits on narrow lots or shares driveways where a swing gate physically cannot open, so slide gates are standard equipment. We repair and replace rack and pinion rails, loop detectors, rollers, and the motor side of slide gate systems without asking you to rearrange your driveway. Bring us the gate as it sits and we’ll keep it working as it sits.
In many Duquesne cases, yes, it’s worth repairing. Original 1920s ornamental iron is often better steel than what you’d buy off a rack today, and Hal welds on site so the panel never leaves your property. We cut out the rotted section, weld in new steel, and coat it. The honest answer depends on how much of the rail is gone; call (877) 610-2993 and we’ll look at it and tell you straight.
Yes. We work on Duquesne shared driveways all the time, where two or three homes rely on the same gate and the same opening. We stage the work so the gate comes off, the panel gets serviced, and the gate goes back up before the end of the day, or we set up a temporary opening if the job runs longer. Nobody gets locked out of their own driveway.
Yes. A gate that moves when it shouldn’t is a strangulation and crushing hazard, especially for children and pets, and it needs a trained gate technician to diagnose the loop detector, photocell, or control board. Don’t try to fix this one yourself. Call (877) 610-2993 any time, and a live person will answer.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Hal has been repairing and welding gates since 2001, and his name is on the shop and on every invoice.





Before
After
Before
After
Before
After