Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Druid Hills
Gate installation in Druid Hills, GA usually costs between $2,800 and $9,500 depending on whether we’re automating an existing wrought-iron gate, hanging a new steel driveway gate, or rebuilding the posts that carry it. We work throughout 30307 and know these streets well: the estates off Lullwater Road, the quiet blocks near Druid Hills Golf Club, the older places along Oakdale Road. Most jobs here start with a footing and hinge-post assessment, not a boxed gate kit. If you need a straight answer about what your gate job will take, call Hal Gatewood at (877) 610-2993. A live person answers, day or night.
Why Gatewood Fence & Gate Is Druid Hills’s Preferred Gate Installation Company
Hal Gatewood has been repairing and installing gates since 2001, and his name is on the shop, the truck, and every invoice. Druid Hills homeowners tend to check that kind of thing. We’ve worked on enough properties between Briarcliff Road and Emory’s campus to know which original gates date to the 1920s, which pillars are holding oak roots under them, and which 1990s operators are about to quit. Gate Installation here is not a one-size job.
We serve Druid Hills from our Atlanta office, so scheduling is straightforward: one call, one clear window, one crew that shows up in uniform with the right parts on the truck. Homeowners in Gate Installation in Druid Hills routinely call us because a neighbor recommended us, or because they saw the Gatewood truck on their block and wrote down the number. That’s how business works in this neighborhood, and we like it that way.
Every job gets the 90-Day Done Right Promise in writing. If something’s off, Hal comes back and makes it right. No runaround. The price is quoted and agreed before any work starts.
Our Gate Installation Services in Druid Hills
Swing Gate Installation
Swing gates are the dominant style across Druid Hills, and for good reason: the original estate homes along Ponce de Leon Avenue and Springdale Road were built for them. A proper swing gate installation starts with the hinge posts. In Druid Hills, those posts are often 80 to 110 years old, mortared brick or granite, and carrying more than they were designed for. We set new steel posts below the root zone when needed, hang the leaf straight, and only then mount the operator. If you have an existing pair of original iron gates, we can keep them and rehang them on new bearings with new brackets.
Driveway Gate Installation
New driveway gates in Druid Hills run the full range, from clean steel estate gates to reproduction wrought iron to match the original 1910s ironwork. We prefer to build around what’s already there. On a 1920s Tudor Revival estate off Ponce de Leon Avenue, our techs found an original wrought-iron double swing gate with a bent hinge post and a 1990s FAAC operator that had burned out its control board trying to pull the sagging leaf. We reset the post below the oak root zone, rehung the leaf with new bronze hinges, and installed a new FAAC 391 swing operator with wired safety photocells, keeping the original ironwork intact and compliant with the Historic Preservation Commission.
Sliding Gate Installation
Sliding gate installation requires a straight run of fence line or a reinforced track, and on some Druid Hills lots the grading and tree canopy make a swing gate the better choice. That said, for steep drives or shorter setbacks near North Decatur Road, a sliding gate can be the cleanest answer. We handle the concrete pad, the V-track or cantilever setup, and the motor. If the job calls for welding a custom steel frame, we weld on site, in your driveway, not in a shop across town.
Pedestrian Gate Installation
Pedestrian gates here are rarely standalone; they’re usually paired with the driveway gate and matched to the same ironwork pattern. We install new pedestrian gates, weld repair panels into existing ones, and hang them so the latch lines up the first time. Salt air is not the issue in Druid Hills; high humidity and decades of rust are. We grind, treat, and recoat before hanging.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Druid Hills
We stock parts and service boards for FAAC, BFT, Linear, and Viking equipment. Older Druid Hills installations often run FAAC or Linear operators from the 1990s and early 2000s, and many of those control boards are no longer manufactured. We keep compatible replacements on hand and rebuild panels around modern safety logic when the original board has no support path. If you call at 2 a.m. with a gate stuck open, the person on the phone is not reading a script. Hal or his crew answer. (877) 610-2993.
Common Gate Installation Problems We See in Druid Hills Homes
- Post lean and root heave. The century-old white oak and elm root systems in Druid Hills push brick pillars off their pads. We regularly find the same pillar leaning again within three to five years unless the footing is dug out and reset below the root zone. That is not a standard conversation in most Atlanta suburbs, but it is the norm on Oakdale and Lullwater.
- Dead 1990s control boards. Obsolete LiftMaster and FAAC boards fail in January and February, exactly when ice loads stress the gate or a dropped limb takes out a sensor. Replacing the board without checking the post alignment just burns up the next board too.
- Legacy operators without safety photocells. Many Druid Hills properties still run original 1970s and 1980s operators that predate UL 325. Those cannot be retrofitted to meet modern entrapment standards. We explain this plainly and quote a replacement that keeps your gate but matches it to a modern operator.
- Rust in original ironwork. Year-round humidity accelerates rust penetration in exposed wrought iron across the neighborhood. A gate that looks fine from the street often has holes at the base of the pickets where water sits against the bottom rail. We weld in new steel and recoat to match, instead of swapping the gate for an aluminum panel that looks wrong on an Olmsted streetscape.
Pricing for Gate Installation in Druid Hills, GA
A new steel driveway gate in Druid Hills typically runs $3,200 to $7,800 installed, depending on width, automation, and whether we’re building new posts or reinforcing the existing pillars. Pedestrian gates usually run $950 to $2,600. Sliding gate systems land between $5,500 and $12,500 with the concrete pad, track, and motor. Adding an operator to an existing swing gate runs $1,800 to $4,200 when the posts are solid.
| Service | Typical Druid Hills Range |
|---|---|
| Steel driveway gate (single swing, automated) | $3,200-$7,800 |
| Pedestrian gate (hung, latched, matched) | $950-$2,600 |
| Sliding gate system (full install) | $5,500-$12,500 |
| Operator retrofit on existing swing gate | $1,800-$4,200 |
| Post reset below root zone (brick or granite) | $1,400-$3,000 per post |
The price we quote is the price on the invoice. No surprise line items, no door-knock adjustment. Every estimate is free, and Druid Hills seniors and veterans get a permanent 10% discount. Call (877) 610-2993 and we’ll walk the job with you.
We Also Serve Cities Near Druid Hills
Our crews work throughout the immediate area, including North Decatur, Atlanta, Gresham Park, and North Druid Hills. If you’re a few blocks outside 30307, the same crew, the same 90-Day Done Right Promise, and the same upfront pricing apply.
Serving Druid Hills, GA - Our Local Coverage Area
We’re based in the Druid Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Druid Hills
Yes, if your Druid Hills property is within the designated historic district, gate work that alters or replaces original ironwork may require review by the DeKalb County Historic Preservation Commission. In practice, that means restoring or replicating the original ironwork, not swapping in a modern aluminum or vinyl panel. We have handled this process many times and can explain what documentation is needed before work starts. Call (877) 610-2993 and we’ll tell you what applies to your address.
Yes, in some cases we can install a sliding gate where a swing gate currently stands, but Druid Hills driveways often have obstacles: mature tree roots, brick columns, or a slope that makes sliding hardware the wrong fit. The answer depends on the run length, post condition, and the tree canopy over the track path. We measure, explain the options, and quote before any work starts.
Because the original post footing was likely set above the root zone of the century-old oaks and elms that line the Olmsted-designed streets. We see this constantly on Lullwater Road and Oakdale Road. When roots grow, they push the footing off level, and the operator starts fighting the lean. The permanent fix is to dig out the old footing, install a deeper setback below the root zone, and reset the post. We quote this as a standalone job when needed.
The honest answer: no, and we won’t. Pre-UL 325 operators without photocells and modern entrapment protection are a safety hazard, and a live person at our shop will tell you that straight. We can install modern wired safety edges and photocells only with an operator that supports them. If your 1990s FAAC or Linear unit is obsolete, we’ll quote a new operator that preserves your existing gate. The price is agreed before we start.
In nearly every case, yes. Original Druid Hills ironwork from the 1910s through 1940s is often better steel than anything made today, and we prefer to keep it. We rehang the leaves on new bearings, weld in fresh pickets where needed, and match the finish before mounting the new operator. If the gate is too far gone for safe reuse, we’ll say so and show you why, then build a reproduction that matches the streetscape. Call (877) 610-2993 for a free second opinion on any written estimate.
Contact Gatewood Fence & Gate in Druid Hills
We’re local, owner-operated, and answer the phone 24/7. The name is on the shop, and the shop is down the road. For a free estimate on gate installation in Druid Hills, call (877) 610-2993. Hal will be there himself, or you can drive to the shop and look him in the eye. Price quoted, price agreed, 90-Day Done Right Promise in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Druid Hills and the surrounding area since 2001.