Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Coral Springs
Gate installation in Coral Springs runs $2,400 to $8,500 for a standard driveway gate, and $6,000 to $18,000 for a full HOA community entry system with operator and access control. Most jobs take 3 to 10 working days from template to final walkthrough, depending on whether we’re setting new posts, running power, or replacing an operator that’s been failing since the Clinton administration. Hal Gatewood’s crew has been working gate jobs in Coral Springs long enough to know every HOA architectural committee on the west side by first name. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Coral Springs’s Preferred Gate Installation Company
Coral Springs is not a city where you can hang a gate and hope. The HOA will look at it. The management company will look at it. Your neighbors will look at it. Hal has been Gate Installation specialist since 2001, and the name on the invoice is the same name on the shop. That means when the architectural committee asks why the gate is 63 inches instead of 60, Hal picks up the phone and talks to them directly. He doesn’t hide behind a project manager.
We carry a 90-Day Done Right Promise in writing on every Coral Springs job. If the gate sags, the operator faults, or the keypad quits inside those 90 days, one call brings Hal back for Gate Repair - Coral Springs. No runaround. No ticket number. He drives to your community off Wiles Road or University Drive and fixes it. Published address, license number anyone can look up, and a phone that rings to a live person. Not a call center three states away.
Our Coral Springs customers keep us busy on word of mouth alone. Property managers in communities off Sample Road and Heron Bay know Hal’s truck. Homeowners in The Crossings, Eagle Trace, and Wyndham Lakes have his number saved. The reason isn’t clever marketing. It’s that he shows up when he says he will and doesn’t swap parts that don’t need swapping. In a city with this many automated gates, that matters.
Our Gate Installation Services in Coral Springs
Driveway Gate Installation
A new driveway gate in Coral Springs usually runs $3,200 to $7,000 for ornamental aluminum or powder-coated steel, including posts, hinges, and a basic operator. Before we quote, we check what your HOA’s CC&Rs say about height, finish, and setback. Coral Springs subdivisions were platted with strict architectural standards, and a gate that doesn’t match the original style will stall at the ARC review. We handle that coordination so you don’t burn a month going back and forth with the board.
Pedestrian Gate Installation
Pedestrian gates here are almost always tied to a driveway gate or a community pool entry. Expect $1,100 to $2,800 for a standard ornamental walk gate with keypad or magnetic lock, installed and adjusted. The humid climate and daily use take a toll on hardware, so we specify stainless hinges and sealed locks as standard. Powder-coated aluminum holds up better in this climate than raw steel, which starts showing rust bloom at the welds within a few wet seasons.
Sliding Gate Installation
Sliding gates are the workhorse of Coral Springs gated communities, and full replacement of a corroded or tracked-out slide gate runs $5,500 to $12,000 when you include the operator. The single biggest variable is the track bed and whether the existing footing is still sound. Years of standing water after afternoon thunderstorms eats concrete footings and buried loop wiring faster than most property managers expect. We pour new footings when the old ones are shot, rather than bolting a new gate to a failing base.
Swing Gate Installation
Double swing gates on Coral Springs driveways run $3,800 to $9,000 depending on width, material, and whether we’re pairing dual operators or a single operator with a latch. Swing gates fail here most often at the hinge post, not the middle of the panel. We set hinge posts in concrete and weld on-site, in your driveway, so the gate stays where you can watch the work. No hauling it off to some shop you’ve never seen.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coral Springs
Hal’s crew is certified on Viking, Ghost Controls, and DoorKing operators, which covers most of the equipment still running in Coral Springs communities. The older DoorKing and Linear gear from the city’s big 1980s and 1990s buildout is reaching end-of-life, and parts for those legacy boards are getting scarce. We keep common Viking and Ghost Controls boards and remotes on the truck so a Coral Springs job doesn’t stall for a week waiting on freight. If your operator isn’t worth rebuilding, we’ll tell you plainly and quote a replacement that matches your existing keypad and loop layout.
Common Gate Installation Problems We See in Coral Springs Homes
- HOA architectural rejections. The style, height, or finish doesn’t match the subdivision’s original powder-coated steel or ornamental aluminum standard. We review CC&R requirements before we cut steel, so you don’t pay for a gate the board won’t approve.
- Lightning-fried operator boards. Coral Springs sits at the western edge of Broward County where summer thunderstorms roll in off the Everglades nearly every afternoon. A close strike on an older operator without dedicated surge protection fries the circuit board and the access keypad, sometimes in the same storm.
- Corroded posts and track hardware. Year-round humidity plus standing water after heavy rain accelerates rust on hinge posts, bottom rollers, and buried loop-detector wiring. We see it on nearly every 15-plus-year-old gate we touch.
- Storm-dropped tree limbs on gate arms and tracks. Coral Springs holds a Tree City USA designation and has a dense residential canopy. Falling laurel oaks and royal poincianas during tropical storm season crack slide tracks and bend gate arms, and property managers budget for it every June.
Pricing for Gate Installation in Coral Springs, FL
Here are honest ranges for the Coral Springs market, not national averages. A single driveway swing gate in ornamental aluminum: $3,200 to $6,500. A double swing gate with dual operators: $6,000 to $11,000. A slider for a driveway or small community entry: $4,500 to $9,500. A full HOA entry system with operator, keypad, loop detectors, and access control wiring: $8,000 to $18,000. What moves the number is post footing work, underground power runs, and whether the old operator can be reused. Hal quotes the price before any work starts and doesn’t change it at the door. Seniors and veterans get a permanent 10% discount, and any repair over $200 takes $40 off. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Coral Springs
Besides our work throughout Coral Springs, Hal and his crew regularly install and repair gates in Parkland, Tamarac, Margate, and North Lauderdale. If you’re in an older HOA community in Tamarac with a failing slide gate or a Parkland estate with a driveway gate that’s sagging, give us a call. No trip charge inside the county, and a free second opinion on any written estimate you’ve gotten from another company.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Coral Springs
You need written ARC approval before any concrete goes in. Most Coral Springs subdivisions require a submittal with the gate material, finish color, height, and a photo or rendering, and the standard is almost always powder-coated steel or ornamental aluminum matching the original build. We help put the package together and can talk to the management company directly if the board kicks it back with questions. Call (877) 610-2993 and we’ll walk you through it.
Coral Springs was developed in a huge buildout during the 1980s and 1990s, and many of the operators installed then are now 25 to 35 years old. The control boards and motors are past end-of-life, and replacement parts for legacy DoorKing and Linear units are getting hard to source. When the board and the gearbox are both failing, a full operator replacement costs less over two years than nursing the old one along. Hal will tell you which is which, straight.
Coral Springs sits near the Everglades transition zone where afternoon thunderstorms are intense and frequent, and lightning surges are the leading cause of fried gate boards and keypads in this market. On new installs we add dedicated surge protection on the incoming power and the low-voltage access line. That’s standard for us here. For older systems without surge protection, a single close strike can kill the board, the keypad, and the loop detector in one storm. Call (877) 610-2993 to have yours checked before the season peaks.
In some communities, yes, but the HOA has to approve the panel placement and it has to be rated for the gate’s weight and daily cycle count. Solar operators work best on residential driveway gates with moderate use; a shared community gate with 300 cycles a day will drain the batteries during cloudy summer afternoons. Honest answer: solar is worth considering for a private driveway gate, but not for a community entry. We’ll tell you if it makes sense before you spend the money.
Plan on $3,500 to $9,000 for storm damage, depending on whether the track is cracked, the gate arm is bent, or the operator took a surge when the tree came down. Falling laurel oaks and royal poincianas during storm season crack slide tracks and bend gate arms every year in communities off Sample Road and Wiles Road. If the gate is closed to traffic, call us immediately. We’ll do an emergency board-up or bypass so residents aren’t locked out, then quote the repair. Reach Hal at (877) 610-2993 any hour.
Local Knowledge That Saves You Money in Coral Springs
Coral Springs was built as a master-planned city by Coral Ridge Properties starting in the late 1960s, which is why the city has one of the densest concentrations of HOA-governed communities in western Broward County. That shapes nearly every gate installation we do here. A homeowner in a subdivision like Eagle Trace or Heron Bay isn’t just buying a gate. They’re buying approval from a board, coordination with a management company, and compatibility with Coral Springs Gate Access Control systems. Skip any one of those and the project stalls or fails.
Last June we replaced a legacy DoorKing slide gate operator at The Crossings, a HOA community off Sample Road. The existing rack and pinion was so corroded from years of summer downpours that the gate would stall mid-travel and blow the safety photocell circuit. We coordinated with the management company for a 48-hour window, removed the old hinge-post plates, poured new post footings for a FAAC 412 operator, and re-tuned the loop detector at the exit lane so resident keypad entry stopped faulting during afternoon thunderstorms. That is what a real Coral Springs gate job looks like. Not a catalog install. Work matched to the site, the storm pattern, and the board’s requirements.
If you’ve got a failing gate or you’re planning a new install in Coral Springs, call (877) 610-2993. Hal will quote the job, stand behind it for 90 days in writing, and answer your call himself if something isn’t right. That’s how it has worked since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Coral Springs since 2001.