Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Coral Springs
Gate repair in Coral Springs most often comes down to one of two jobs: a swing gate that sagged at the hinge post, or an operator that stopped responding after an afternoon thunderstorm. A typical service call here runs $150-$400 for hinge and alignment work, and $650-$1,900 when the operator or control board needs replacement. We’ve been fixing both since 2001, and when you call (877) 610-2993, a live person answers, not a menu.
We know Coral Springs because we work it every week. The HOA gate on Wiles Road, the villa community off Sample Road, the subdivision entrance near the 33075 postal zone. The crew that shows up has driven past your neighborhood gate a hundred times. That matters when the problem is a legacy Doorking board nobody makes parts for anymore.
Why Gatewood Fence & Gate Is Coral Springs’s Preferred Gate Repair Company
Hal Gatewood started this company in 2001, and his name has been on the shop ever since. That’s the kind of accountability a Coral Springs HOA board actually wants: a published address, a license number anyone can look up, and a person who will drive back out if something isn’t right. Every job gets the 90-Day Done Right Promise in writing, not as a slogan. If it’s not done right, one call brings him back.
Coral Springs homeowners have told us the same story for years: a national outfit quoted one number on the phone, then the tech showed up and suddenly the invoice was double. We don’t work that way. The price is quoted and agreed before any work starts. You’ll know the number before we touch a wrench. And if a HOA property manager needs a second opinion on a written estimate, that’s free.
Response time to Coral Springs is the same day for most repair calls. Scheduling is coordinated from our South FL office in Miami, but crews serve Coral Springs locally and keep common parts on the truck. We’re not driving from three counties away.
Our Gate Repair Services in Coral Springs
Electric Gate Repair
Most electric gate failures in Coral Springs start with the control board. Summers here bring near-daily convective thunderstorms off the Everglades, and one close lightning strike can fry a board before the rain stops. We diagnose whether the board can be rebuilt or needs replacement, then quote both options honestly. If the operator is a 1990s Linear or HySecurity with no parts availability, we’ll tell you that in plain language instead of charging you for a temporary fix.
Automatic Gate Repair
Automatic gate systems in Coral Springs range from private driveway openers to shared community entrances with loop detectors, keypads, and safety photocells. The older the operator, the more likely the failure is mechanical rather than electrical: stripped gears, seized motors, broken limit switches. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite, and we can usually tell you on the phone whether your issue sounds like a board, a motor, or a sensor. That call costs nothing.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. Coral Springs’s year-round humidity and standing water after heavy rains accelerate rot and concrete failure at the post footing. We see ornamental aluminum swing gates that look fine at eye level but sit a half inch low at the latch because the post has shifted. We correct the footing, weld the hinge repair on site, and realign the gate so it doesn’t bind. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Coral Springs’s older communities often have gates that have been adjusted and re-adjusted for years without ever being square. The ground shifts, the post settles, and someone keeps tightening bolts that were designed to be reset. We measure the gate, correct the post and hinge position, and set the travel limits properly. After a realignment, an automatic gate should open and close without dragging, binding, or slamming.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coral Springs
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Coral Springs HOA communities still running original DoorKing or Linear operators, we keep common retrofit parts on the truck and can usually match a legacy installation to a current LiftMaster replacement without re-engineering the whole entry. The goal is to get the gate operating safely, and parts availability is half the battle here.
Common Gate Repair Problems We See in Coral Springs Homes
- Lightning-fried control boards. Coral Springs sits at the western edge of Broward County near the Everglades transition zone, where summer afternoon thunderstorms are intense and frequent. Legacy Doorking and Linear boards from the 1980s-1990s buildout are especially vulnerable to surge damage.
- Hinge post rot and concrete failure. High humidity and standing water after seasonal downpours accelerate corrosion on buried post sections and anchor concrete, causing ornamental aluminum swing gates to sag and misalign over time.
- Rusted bottom rollers and failed loop detectors. Slide gates in HOA communities take a beating during tropical storm season. Buried loop-detector wiring can fail after repeated saturation, which means the gate stops sensing a waiting car.
- Storm-damaged gate arms and tracks. Coral Springs holds a Tree City USA designation with an unusually dense residential canopy. During tropical storm season, falling laurel oaks and royal poincianas drop directly onto gate arms and track systems, a predictable surge event property managers budget for every June.
Pricing for Gate Repair in Coral Springs, FL
Here’s what you can expect to pay in Coral Springs’s market. Hinge and post repair on a standard ornamental aluminum swing gate typically runs $180-$400 depending on footing work. Gate realignment runs $150-$300. Electric gate diagnostics start at $95, which is credited toward the repair. A control board replacement runs $350-$900. A full operator replacement, including a new motor and safety sensors, typically runs $1,200-$2,400 installed. The price is always quoted and agreed before any work starts. We offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Coral Springs
Our Gate Repair team works throughout western Broward County, and we’re often in Coral Springs multiple times a week. If your gate is in Parkland, Tamarac, Margate, or North Lauderdale, the same crew and the same 90-Day Done Right Promise apply. Call (877) 610-2993 and ask if we’re in your area this week; usually we are.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Coral Springs
Most HOA community gates in Coral Springs were installed during the city’s main 1980s-1990s buildout and still run original Doorking, Linear, or HySecurity operators. Those units are 25-35 years old, and manufacturers have discontinued most replacement boards and motors. When a control board fails, a full operator replacement using a current LiftMaster system is often the cheaper and faster option than chasing obsolete parts. Call (877) 610-2993 and we’ll tell you honestly whether your old operator is worth repairing.
Loop detectors buried under concrete at HOA entrances are exposed to high water tables and repeated saturation during the wet season. Wire insulation cracks, water seeps in, and the detector stops sensing vehicles. In Coral Springs, we replace more loop-detector wire than in drier inland markets, and we use sealed splice kits designed for consistently wet conditions.
In most cases, yes. Older systems often lack the UL 325 entrapment protection sensors now required by code. We retrofit existing gates with new safety photocells, edge sensors, and updated control boards so the gate stops and reverses rather than closing on a person or vehicle. This is standard practice on the legacy operators we service across Coral Springs.
Yes, and property managers plan for it. Coral Springs has an unusually dense tree canopy, and during tropical storm season, laurel oaks and royal poincianas drop large limbs onto gate arms, track systems, and sometimes the gate itself. June through September is our busiest stretch for storm-damage calls, and HOAs in the 33075 zip code often have us inspect gates proactively before hurricane season ramps up.
Failed hinge post footing. The aluminum panels themselves rarely bend; the post shifts in its concrete base due to wet soil movement and years of daily cycling. We correct the post, repair the hinge, and realign the gate so it swings true again. Call (877) 610-2993 for a free estimate and we’ll tell you exactly what your post needs.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Coral Springs since 2001.