Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Coconut Grove
Gate installation in Coconut Grove runs $2,800 to $14,000 for most homes, with custom ornamental work on estates off Main Highway and around the Moorings reaching $18,000 to $30,000. A standard single driveway gate with a quality automatic opener usually lands between $3,500 and $6,500 before the gate’s aesthetic upgrades. We quote the full job up front, in writing, before any work starts, so you know the number before we turn a wrench. Call (877) 610-2993 and Hal or one of his crew will talk through what your Grove property actually needs. We know this neighborhood’s gates, its trees, and its salt air better than anyone passing through in a branded van.
Why Gatewood Fence & Gate Is Coconut Grove’s Preferred Gate Installation Company
Coconut Grove homeowners tend to ask a different set of questions than people in Coral Gables or South Miami. You’re not just asking whether we can hang a gate. You’re asking whether it will stay square when a banyan root decides to lift the post an inch next spring, whether those custom iron hinges will pit in the salt air off Biscayne Bay, and whether the operator will survive another summer thunderstorm. Those are the right questions, and they’re the exact ones we answer every time we work here.
Hal Gatewood has been at this since 2001. His name is on the shop, his address is published, and the 90-Day Done Right Promise is stamped in writing on every job, not buried in fine print. If it’s not done right, we make it right. One call brings him back. No runaround. A live person answers the phone 24/7, not a voicemail or a queue. That’s how it’s been since the first day, and it’s why homeowners in the Grove recommend us to their neighbors on St. Gaudens Road and Poinciana Avenue.
We’re locally owned and owner-operated, serving Coconut Grove from our base in South Florida. Dispatch and scheduling come out of our Miami office, but the crew showing up to your home knows the Grove intimately. They know the old Mediterranean Revival estates near the bay, the mid-century places west of Douglas Road, and the newer concrete-and-glass infill homes carved into tropical lots. They’ve seen what our trees do to gate posts and what our humidity does to gate hardware. That local knowledge isn’t a sales pitch. It’s why our installations stay level and our operators keep running years after a box-store brand contractor’s work has sagged and seized.
Background-checked, uniformed technicians show up for every job, and we are certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether you’re doing a full custom installation or a repair, Hal or a member of his crew will give you a straight answer. You can call us at (877) 610-2993 and drive to the shop and look him in the eye if you’d rather talk in person.
Our Gate Installation Services in Coconut Grove
Driveway Gate
Driveway gate installation in Coconut Grove is rarely a bolt-on job. The neighborhood’s original estates off South Bayshore Drive and Main Highway often have double driveway gates set into coral-rock or concrete columns, and newer homes may run a long driveway through dense tropical plantings. We handle custom fabricated and ornamental gates, heavy sliding gates, and swing gates sized to the opening and to the trees pressing in on both sides. We also fix the post problem before it fixes you: a gate sags in the hinge post, not in the middle, and that is where we start.
Pedestrian Gate
A pedestrian gate in the Grove gets heavy daily use, often from the same ficus roots that bedevil driveway gates. We build and install matching pedestrian gates next to driveway gates, in courtyard walls, and in privacy hedgerows. We cut the post footings deep enough to resist root heave, which in this neighborhood often means 36 to 42 inches below grade, not the 24 inches some companies figure. We also set the gate to close smoothly against the latch and keep its reveal true in the salty air, which wants to bind every hinge and corrode every exposed steel edge.
Sliding Gate
Many Coconut Grove homes use sliding gates to avoid the swing clearance problems created by short front setbacks and tight driveway curves. But a sliding gate in the Grove fails fast if the ground track is set shallow and heavy equipment or the weight of salt-corroded rollers gouges it. We prefer under-gate cantilever or v-track systems with galvanized or polymer hardware where the design allows, and we read the driveway drainage so the track doesn’t sit in standing water after a Miami-Dade downpour. This is especially true on properties near the bay and in the low-lying lots around the village.
Swing Gate
Swing gates suit the older Mediterranean Revival and colonial-style homes along Main Highway and in the south Grove better than any other type. They match the original architecture and can be hung from existing columns if the footings are still level. Too often they’re not. Ficus and banyan roots routinely lift outboard post footings in Coconut Grove, which drags the leaf and burns out the operator. We check the post’s plumb and water content first, and we will not hang a new gate on a post that’s already moving. Fix the panel without the post and you’ll fix it twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coconut Grove
We install and service operators and hardware from the brands Coconut Grove homeowners actually have and ask for: Linear, DoorKing, and Ghost Controls are the three we see most in our service calls here. We keep common parts on our trucks for Coconut Grove runs, so we’re not asking you to wait half a week for a gearbox or a hinge assembly from a distributor. We also install Viking and other commercial-grade units on estate-size gates. Tell us the brand you already have, and we’ll match the installation or repair to it rather than forcing a full system replacement you may not need. That’s the repair-first approach we brought to this neighborhood and won’t abandon.
Common Gate Installation Problems We See in Coconut Grove Homes
- Hinge posts lifted out of level by ficus and banyan roots. Coconut Grove’s dense ficus and banyan canopy pushes massive surface roots that heave concrete gate-post footings an inch or more within a few years. A new gate installed on a shallow footing will drag, bind, and kill the operator before the hardware itself fails.
- Salt-air corrosion from Biscayne Bay. Homes within blocks of the water live in a constant salt-laden humidity that eats steel hinges, rack-and-pinion slides, and operator housings far faster than inland Miami-Dade. Coastal-grade stainless or galvanized hardware is not an upgrade in the Grove; it’s the minimum spec.
- Control-boards fried by summer lightning and power surges. Miami-Dade’s afternoon thunderstorms hammer the grid, and an unprotected LiftMaster or DoorKing control board is often the first casualty. We install and retrofit coastal-grade surge protection and battery backup on new systems as standard, not as an add-on.
- Incorrect gate sizing for heavy custom panels. Some builders hang an 18-foot custom steel sliding gate on a residential operator rated for a much lighter panel and smaller duty cycle. We spec the operator to the actual gate weight and the site’s wind exposure. A leaf this heavy must run silently, not strain against an undersized motor.
Pricing for Gate Installation in Coconut Grove, FL
A single driveway gate with a quality automatic operator in Coconut Grove typically runs $3,500 to $6,500 installed, including the buried power run, the operator, safety photo-eyes, and a standard control setup. A pair of 14-foot custom ornamental swing gates on a Mediterranean Revival estate can run $9,000 to $18,000 depending on the ironwork pattern and whether we’re adding concealed operators. A heavy sliding gate in aluminum or steel usually runs $6,000 to $14,000. Pedestrian gates sit between $1,800 and $4,500 with a quality closer. These prices include the trench and the safety edges, and they include us doing it right the first time. The price we quote is the price you pay, before any work starts. There is no trip charge inside the county, and we’ll give you a free second opinion on any written estimate you’ve received. Call (877) 610-2993 and we’ll walk the site and put a written number in your hand.
We Also Serve Cities Near Coconut Grove
If you’re just outside the Grove, we also handle gate installation and repair in Coconut Grove‘s neighboring communities: Coral Gables, Glenvar Heights, South Miami, and Coral Terrace. The same local crews serve all of these areas, and the same 90-Day Done Right Promise covers every job. Gate Installation is a service we provide across Miami-Dade with the same owner-operated standard Hal built the business on.
Serving Coconut Grove, FL - Our Local Coverage Area
We’re based in the Coconut Grove area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Coconut Grove
Because Coconut Grove has one of the densest concentrations of large ficus, banyan, and gumbo-limbo trees in Miami-Dade, and their surface roots lift concrete footings aggressively. We routinely set gate-post footings 36 to 42 inches deep in the Grove, which is appreciably deeper than the 24-30 inches often specified in Coral Gables. The extra depth anchors the post below the root-heave zone. We also core through any root we encounter rather than cutting a shallow notch and hoping the tree doesn’t push the post out of plumb next year. For a quote on your gate and post work, call (877) 610-2993, and we’ll look at the trees on your lot specifically. Estimates are free.
Yes, with a cantilever or under-gate track system, and we’ve done exactly that on Coral Gables-style narrow driveways in the Grove where a swing gate would eat too much of the front yard. The gate rides on a side-mounted carriage and counterweight rather than dragging along a ground track, so there’s no rail to clog with sand and leaf litter or to seize in standing water. We size the post and the operator for the full weight of the steel panel plus the salt-air load, then we set the track parallel to the driveway’s fall line so the gate doesn’t walk or hang up. Call (877) 610-2993 if you have a narrow drive and a heavy gate in mind. We’ll measure it and write you a fixed price.
We integrate new gates with the systems already on the property, including intercom, keypad, camera, and loop detector, and we work with the major brands: LiftMaster, DoorKing, Viking, and Linear. On estate homes in the Grove where there’s an existing gate intercom or camera entry, we’ll match the new gate to that system rather than selling you a separate app you didn’t ask for. That often means running new low-voltage conduit alongside the gate’s power run and installing a loop detector set to the driveway’s length so the gate opens only for vehicles moving in the intended direction. Call (877) 610-2993 for a no-cost review of what you have and what your new gate will need.
Two reasons, mostly: the salt-laden humidity off Biscayne Bay and the power surges from Miami-Dade’s frequent summer thunderstorms. Salt air corrodes motor housings, terminal blocks, and sensor wiring, and the surges fry control boards on automatic gate openers when coastal-grade surge protection is missing. We build both protections into every new Coconut Grove installation: marine-grade enclosures and sealed connections where the salt can attack, plus whole-opener surge protectors and battery backup when the grid blinks. If your current operator has died twice in three summers, the problem is the installation spec, not the brand. Call (877) 610-2993 and we’ll diagnose it and give you a straight repair or replacement price.
Yes, you need both. A sliding gate in Coconut Grove has to meet the safety standard of reversing when it encounters a person, a child, a pet, or a visitor’s car, and that requires monitored photo-eyes across the gate’s path plus a contact edge or optical edge on the leading edge of the leaf. This is not optional, and it’s not an upsell. We also set the auto-close delay long enough for delivery drivers and visitors to clear the path, which matters on the short front yards and quick curb-to-door walks common in the Grove. Call (877) 610-2993 for a quote on a code-compliant installation with the safety edges included, not added on later.
Get a Fixed-Price Gate Installation Quote in Coconut Grove
Coconut Grove’s trees will test a gate post, and its salt air will test the hardware. We engineer for both from the first day, and we stand behind the job with the 90-Day Done Right Promise in writing. Hal Gatewood has been doing this since 2001, and his name is on every invoice. Call (877) 610-2993 for a free estimate. A live person answers around the clock, and if you want to shake the hand of the person who’ll actually be doing the work, you can drive to the shop and meet him. We serve Coconut Grove, Coral Gables, Glenvar Heights, South Miami, and Coral Terrace, and we’d rather fix a gate than replace it. Give us a call and we’ll show up when we said we would.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, providing gate installation across Coconut Grove and greater Miami-Dade.